How do you measure for pinch Pleat curtains?
The first step is to measure for pinch pleat curtains. Measure from the top of your window to where you want your curtain rod to be, and then add an extra 12 inches for seam allowance. This will give you a rough idea of how wide your fabric should be.
How many inches do you add for pinch pleats?
For example, if you'd like each double pinch pleat to be around 4 inches, add another 2 inches for each fold since they should be half of the length of the pleat. So if you're calculating six double pinch pleats, add 24 inches to the width of the window.
How do you measure for pleats on a couch?
If you'd like there to be six pleats, measure how long you'd like each pleat to be. For example, if you'd like each double pinch pleat to be around 4 inches, add another 2 inches for each fold since they should be half of the length of the pleat.
How much space do you leave for pleats on a curtain?
Mine was 3 and 1/2 inches. 4 inches is recommended for a leading edge. Then you have to divide the rest of the curtain into spaces and pleats. Mine looked like this. Pretend that dark line below is the top edge of your curtain. I pinned each pleat and left each space.
How far apart are pinch pleats?
What are some other names for pinch pleats?
What is pinch pleat drapery?
What kind of look do pinch pleat drapes give a room?
How far apart should pinch pleats be?
Standard spacing is 5 pleats per 54” fabric width, however can be adjusted to accommodate different fullness levels.
How do you calculate pleat spacing?
Tally the number of pleats that will be on the window curtain. For example, there can be six pleats. Divide the window length by the number of pleats, then calculate how big you'd like the pleat to be. Add another few inches for the fold of the pleat.
How wide should pleats be?
The percentage of fullness determines the size of the pleats. With 50% fullness, the pleat is usually about 3″ wide. With 100% fullness, the pleat is usually about 6″ wide. In both cases, there is typically 12″ from the center of each pleat to the center of the next pleat.
How wide should my pinch pleat curtains be?
0:522:39Selecting the correct size Ready to Hang Pinch Pleat Curtains Quickfit ...YouTubeStart of suggested clipEnd of suggested clipAnd hang two curtains on each side. For example if your window is 470 centimeters wide you could useMoreAnd hang two curtains on each side. For example if your window is 470 centimeters wide you could use two packs a pack of 240. In a pack of 180.
How do you calculate pinch pleats?
Carolina Custom Draperies notes that you should multiply the total width by 2.5 and record the result. This allows for the proper amount of fullness for the pleated drapes. For example, if the total width is 84 inches, multiply 84 by 2.5 to get 210 inches, the calculated fabric width.
How are pinch pleats measured?
0:252:20How to Measure Pinch Pleat Made to Measure Curtains On A PoleYouTubeStart of suggested clipEnd of suggested clipNow measure the drop to measure the drop for pinch pleat heading measure. From directly underneathMoreNow measure the drop to measure the drop for pinch pleat heading measure. From directly underneath the curtain pole rings to the point where you want the bottom edge of the curtain to finish.
How do you calculate fabric for pinch pleat curtains?
To calculate the number of fabric widths required to make your curtains:Multiply Pole Length by Fullness Ratio.Divide this figure by the Fabric Width.Round the result up or down to the nearest whole number*.This whole number is the number of widths you require to make your curtains.
How much width of fabric do I need for double pinch pleat curtains?
1. Calculate the cut width of the fabric as the finished curtain width times 2.5, plus 6 inches. For example, for a finished curtain 40 inches wide, the cut fabric width is 40 times 2.5 to equal 100, plus 6, for a final cut width of 106 inches.
How are knife pleats calculated?
Everything about knife pleats is calculated by 3 times the width. If you want a knife pleat measuring 1 inch (2.5cm) you need to calculate 3 inches (7.5cm) of fabric. If you are making your own pattern, a rule of thumb is that a pleat takes 3 times its width of fabric.
How wide should curtains be for 72 inch window?
How Wide Should Curtains Be For A 72-Inch Window? Let's say you want standard, thick curtains to cover your 72-inch window. You'll want to look for curtains that measure between 144 and 180 inches wide.
What is fullness ratio for curtains?
Fullness Ratio is the ratio of the width of the curtain before pleating to its finished width when pleated or gathered. The higher the fullness ratio the more gathered and heavier the curtains will be. We recommend a Fullness Ratio of 2.4 to 2.5 for a pencil pleat curtain.
How far should curtains extend past window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window's inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window's frame.
How do I calculate how many pleats I need for a skirt?
9:1417:20HOW TO CALCULATE FABRIC NEEDED FOR PLEATS - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt starts off just like knife pleats. So you want to fold point one over to point three and thenMoreIt starts off just like knife pleats. So you want to fold point one over to point three and then hold it in place with a pin.
How do you calculate fabric for pleats?
Divide your waist measurement by the desired number of pleat. pleat width (25 waist/10 pleats = 2.5”) and you get the finished pleat width for each box pleat. Since each pleat takes 3 times its width in fabric, multiple your waist measurement by 3: 25 x 3 = 75 (the fabric you need to make ten 2.5”-wide box pleats).
How do you calculate triple pleat curtains?
Fullness Ratio is the ratio of the width of the curtain before pleating to its finished width when pleated or gathered. The higher the fullness ratio the more gathered and heavier the curtains will be. We recommend a Fullness Ratio of 2.5 for a triple pleated curtain.
How much extra fabric do I need for pleats?
Generally, each pleat takes three times its width in fabric: the pleat (as it appears on the surface), the underfold (turn-under), the underlay (return). In other words, each pleat is three layers thick. So, to create a 1”pleat, you'll need 3” of fabric.
What are pinch pleats?
One of the most common pleats are pinch pleats, and they aren't as complicated or as intimidating to create as they first seem. But making those pleats requires a bit of planning, knowing the right measurements and making sure you have enough material for putting the curtain together and hanging it up on a window. Advertisement.
How to make pleats larger?
If you'd like to make the pleats larger or smaller than the example above, calculate it by multiplying the desired number of pleats to the length of the folds, then add that to the width of the window .
How many pleats on a window curtain?
Tally the number of pleats that will be on the window curtain. For example, there can be six pleats. Divide the window length by the number of pleats, then calculate how big you'd like the pleat to be. Add another few inches for the fold of the pleat. Advertisement.
How to make a window curtain look better?
It's always best to calculate a little bit more fabric and cut it off at the side, then hem the curtain or pin and fold it back. The alternative is to calculate too little fabric and have an awkward looking window .
What do pleats do to curtains?
Pleats make regular curtains look so much more ornamental and can add an accent to a bedroom or living room without too much effort. Certain pleats also add a fuller look to thinner fabrics and can make simplistic rooms look a little bit more formal.
Can pleat guides help you adjust measurements?
To make sure that all of your calculations add up, there are online pleat guides that can help adjust or confirm your measurements.
MEASURE LENGTH
Measure from the top of the curtain rod down to where you want the curtain to fall.
MEASURE WIDTH
Measure straight across the window. If there are any casings, include the casings in the measurement. Add 12 inches to that measurement. This will allow for the curtains to open beyond the window so that the entire window shows and allows for an overlap at the center when curtain is closed.
STYLING TIP
We recommend Traverse Rods, which allow easy open and close sliding, via a track system. You can use pinch pleat rings and drapery hooks on a decorative rod.
How to measure drapery length?
Measure the length of the drapery you will need by starting at the top of the window and measuring down to the point where you want the curtains to end.
How to measure a window?
If there are any casings, include the casings in the measurement. Be sure and measure straight across and not at an angle. Write down the measurement.
How wide should drapes be?
Choose your draperies based on the rod width. For a rod that is 40 to 48 inches wide, choose drapes that are 48 to 50 inches wide. A rod that is 49 to 72 inches wide will require drapes 72 to 75 inches wide. A rod width of 73 to 96 inches wide should have drapes that are 96 to 100 inches. A rod 97 to 120 inches wide needs drapes 120 to 125 inches. A rod that is 121 to 144 inches needs a drape that is 144 to 150 inches wide.
How do pleated drapes help?
Pinch pleat draperies help keep hot sunlight out in the summer and cold air out in the winter. They can also make your windows look larger, especially when hung so that they don't obstruct the window when they're open.
Can you lean against a window when measuring?
Don't lean against the window while taking measurements. It's easy to fall and injure yourself or break the window.
What Are Pinch Pleat Curtains?
Pinch pleat curtains are often made of heavy fabric such as suede, velvet, silk, and jacquard. They are fabulous curtains with one, two, or three pieces of fabric pinched at the top to form a crease. It adds an almost wavy look to the material from the top on downward.
How to fold pleats on a hoodie?
Now fold the area in half to make a definite crease. Continue folding all of the pleats. At the two ends, fold the hem allowance in half with the hood placed in the middle.
What is the easiest curtain rod to install?
Most experts believe ordinary curtain rods with curtain rings are the easiest for the home decorator to manage. However, although a little trickier to install, poles with gliders offer a smoother operation.
How to spread curtain material?
Use a large table, a bed with sheets only, or even a freshly vacuumed floor to spread the material. You want to spread the back of the curtain face down, with the top of the fabric facing you.
What is the measurement of curtain hardware?
This measurement is critical as you want the fabric to cover the curtain hardware completely. A typical measurement might be three-quarters of an inch.
What are the two factors that stand out the most when choosing curtains?
When choosing curtains, the two factors that stand out the most is the colors and the material . The colors of the curtains must match the room and furniture for it to look professional. Friends and neighbors may have a persuasion over the decision, but you choose the in-home decor in the end.
How many pins do you need for a curtain?
You’ll need one hook for each pleat, plus a beginning and endpin. If you have an eight-pleated curtain, you’ll need ten pins.
How many inches are in a pleat?
Each pleat and space was 4 inches. Well, to be exact it was 3 inches & 15/16ths... that one little hash line before the 4 inch mark. That made them all even.
How many inches should I use for curtain return?
I had to measure what my curtain return was. Mine was 3 and 1/2 inches. 4 inches is recommended for a leading edge. Then you have to divide the rest of the curtain into spaces and pleats.
How do Pinch Pleat Curtains Work?
Pleats are added to give curtains a more tailored look while helping them to flow in and out without the bottom becoming too full and taking up too much space from the window. In other words, they keep your curtains from looking sloppy and naturally give them a more structured look.
What are pleated curtains?
Popular Types of pleated curtains 1 Flat Drapery Pleat – These are plain-old, run of the mill curtains with clip rings. You might see the term “Flat Panel Curtains” also used. 2 French Drapery Pleat (or Pinch Pleat) – This is the type we will be making today and it is the most common style of curtain pleat that forms 2 or 3 folds and then comes together 3 to 5 inches from the top of the curtains. 3 Grommet Pleat – These are the curtains you see often with the metal grommets that the rod goes through. 4 Rod Pocket – This is where a pocket is sewn at the top for the rod and the fabric gathers when the curtain is pushed to either side. The negative of these is that often times they are not easy to open and close, they can only open as far as the gathering at the top will allow and also they don’t always stay in place.*
How to hem pleater tape?
Pin your pleater tape and hem the edges of the tape right on the top gold seam and I like to hem right between the bottom two gold seams. Be sure you don’t hem over the openings to the little pockets at the bottom. Use a thread that matches your curtains.
What is a grommet pleat?
Grommet Pleat – These are the curtains you see often with the metal grommets that the rod goes through. Rod Pocket – This is where a pocket is sewn at the top for the rod and the fabric gathers when the curtain is pushed to either side.
What is flat drapery?
Flat Drapery Pleat – These are plain-old, run of the mill curtains with clip rings. You might see the term “Flat Panel Curtains” also used.
How to measure curtains before buying?
You can do this one of two ways. Before you buy your curtains, you want to measure the height that you want your curtains, taking into account the height of the rings and paper clips. For tips on knowing the right height for new curtains, check out this post: Easy, DIY Curtain Rods
Why do I put curtain weights on the bottom of curtains?
Sometimes new curtains or recently washed curtains can be a little unruly so I added some curtain weights to the bottoms to give them a more streamlined, professional look.
How far apart are pinch pleats?
Pinch pleats should be between four inches and six inches apart. Typically, there is a 4.5″ space between pleats and 4.5″ pleats for both triple and double fold pleats. That said, the pleats can be any size. It all depends on how much fabric used, how much fullness you want and the depth of the drapery rod brackets.
What are some other names for pinch pleats?
The different names for pinch pleat drapes depends on how many pleats there are. A single pinch pleat is sometimes referred to as a ‘New York pleat’ or a ‘one finger pleat’ or a ‘tailored pleat’ . A double pinch pleat is also called a ‘Dutch pleat’ or a ‘two finger pleat’. The triple pinch pleat is also known as a three finger pleat.
What is pinch pleat drapery?
Pinch pleat curtains are a classic custom drapery option that will add style to any room. Our talented designers at Innuwindow can help you find the perfect pinch pleat drapery to suit any décor.
What kind of look do pinch pleat drapes give a room?
Pinch pleat drapes look great in many different interiors. They have a crispness that complements fancy or more relaxed environments. The most popular rooms for pinch pleat curtains are living rooms, dining rooms, and master bedrooms. Pinch pleat drapery can bring out a bold pattern, and they work well with a rich fabric with the depth of their folds. You won’t have to replace pinch pleat curtains any time soon, because they are a classic type of drapery that never really goes out of style. Two finger pinch pleats have the versatility to hang on rods or tracks.
