How many rails do I need for a 5 foot fence? For any fence that is less than 5 feet high, it is advised that you use a minimum of two horizontal rails between the posts. For fences that are between 5 and 7 feet high, you should use three rails, and for fences that are 8 feet high, you should use four rails.
How many rails do I need for a fence post?
Number of Rails. It is recommended that you use a minimum of 2 horizontal rails between posts for all fences less than 5' high, 3 rails for fences 5' to 7' high, and 4 rails for 8' high fences. Fences taller than 8' are outside the scope of this calculator due to structural considerations.
How to calculate the number of rails on a fence?
1 Number of posts = (fence length / post spacing) + 1 (round the result up) 2 Number of sections = number of posts - 1 3 Post length = fence height * 1.5 4 Total number of rails = number of rails per section * number of sections 5 Total number of pickets = fence length in inches / (picket width + picket spacing) (round the result up) More items...
What size fence do I need for 6 feet?
Since you want the fence height to be 6 feet, you will need a post that is at least 9 feet. Similarly, the minimum depth of the post hole would be 3 feet. This gives you a fence height of 6 feet above the ground. How many pickets do I need? Let’s say that the pickets are 3.5 inches wide with no gaps between them.
How many pickets do I need for a 1000 foot fence?
Let's say our fence will be built out of 5-inch-wide pickets, with 1 inch of spacing. As 1,000 feet equals 12,000 inches, the total number of pickets will be: All we need to do now is to estimate how much concrete we will need to secure the posts to the ground. Let's say we are using cuboid posts that are 5 inches wide and 4 inches thick.
How much of a fence post should be buried in the ground?
How much space between posts?
Why have a privacy fence around your property?
Why do people put picket fences around their houses?
Can you build a fence the way you like it?
Is it cheaper to build a fence?
Is it satisfying to build a fence?
See 4 more
About this website
How far apart should Arris rails be?
Set out the intermediate posts, try to keep them equally spaced with no more than 3m (10ft) between each pair. Dig a hole for the second post and push the ends of each arris rails into the slots in the first two posts.
How many fence poles do I need?
Equations used in the fence calculator Number of posts = (fence length / post spacing) + 1 (round the result up) Number of sections = number of posts - 1. Post length = fence height * 1.5.
How tall should a 2 rail fence be?
3-4 feet tallTwo rail fences are 3-4 feet tall. Three rail fences are 4-5 feet tall. Four rail fences are 4.5-5 feet tall. Two rail fences are best for decorative fencing and small or serene animal confinement, such as dogs, goats, and alpaca.
How far apart should fence rails be?
STANDARD RAIL SPACING On two-rail and three-rail fencing, there is 11 inches between rails. On four-rail fencing, there is 9 inches between the rails.
What size fence post do I need for a 5ft fence?
What size post for 5ft fence:- for a 5 foot high fence you will need atleast 4in × 4in (4-inch by 4-inch) square post. This is the best post size for a 5-foot fence.
How far apart should I put my fence posts?
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn't cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
How high is a 3 rail fence?
about 4' high3 rail fence is about 4' high at the top rail. 2 rail fence is about 3' high at the top rail. Most 3 rail posts are 7' long (A 3 rail western red cedar post is 6.5' long).
How tall is 4 rail split rail fence?
2-rail – 36” tall. 3-rail – 48” tall. 4-rail – 60” tall.
How tall should a 3 rail horse fence be?
Horse fences should be 54 to 60 inches above ground level. A good rule for paddocks and pastures is to have the top of the fence at wither height to ensure that horses will not flip over the fence.
Do you need 3 rails for a fence?
All fences will have a top and bottom rail. One general rule of thumb is to have a horizontal rail for every 24 inches in height. For a six-foot-high fence, this means three rails. While a middle rail may not be a structural necessity, it will help keep fence boards in place and may limit warping and twisting.
Where should fence rails be placed?
Typically, the top rail is placed 7-8” from the top of the fence. The bottom rail is typically 7-8” from the grade. And the middle rail is placed even between the top and bottom rails. Do not place your rails any further from either the top or bottom of the fence.
How many rails do I need for a 4 foot fence?
Two parallel rails are sufficient for fences shorter than 4 feet. Three rails are necessary for taller fences and for heavier privacy fences.
How many posts can fence an acre?
An acre needs 110 poles to fence given a 3 meter spacing. A family of five can dig the holes in 2 days each digging 11 holes per day providing a better a moment for bonding while staying at home. We have poles treated poles even at Kshs 380 vat inclusive with assured durability.
How much fence do I need for 1 acre?
If we assume that your property is equal on 4 sides, then it is as simple as taking the square root of 43,560 square feet. This gives you 209 feet on each side, which would require 835 linear feet of fence to enclose the entire acre property (209 feet times four sides is equal to 835 linear feet).
The Home Depot Logo
Get $5 off when you sign up for emails with savings and tips. Please enter in your email address in the following format: [email protected] Enter Email Address GO
Fence calculator - Estimate Privacy & Wood Fence Cost
With this fence calculator, get to know about the posts, rails, nails, concrete, fences, pickets, and other necessary hardware for your fence project.
Fence Calculators | Hoover Fence Co.
HOOVER FENCE CO. 4521 Warren Ravenna Rd. Newton Falls, Ohio 44444 Mon-Fri 8:30AM - 5PM EST Office: 330-358-2335
Fence Calculator - Construction Calculators - Making Every Job Simpler
Real-time graphics. Make the calculations and see the changes.
What is a line of fence?
A line of fence is defined as a continuous stretch of fence unbroken by corner posts, gates or other breaks in the fence line. Use feet and fractions of a foot expressed as a decimal. You could have a single line of fence of say 100 feet with a gate exactly in the center of that line.
What is double swing gate?
A double swing gate is a gate that uses hinges and has two halves that each swing off their own gate post. Generally limit the widths to 16' and if you would like to avoid problems try to limit the widths to 10'. Widths greater than 16' are a structural nightmare that you don't want to deal with and are outside the scope of this calculator. Wide wooden gates are more prone to sagging problems and post sizes need to be enlarged. Other types of gates are outside the scope of this calculator.
What is a swing gate?
A single swing gate is a gate that uses hinges and only has one leaf. Generally limit the widths to 8' and if you would like to avoid problems try to limit the widths to 5'. Widths greater than 8' are a structural nightmare that you don't want to deal with and are outside the scope of this calculator. Wide wooden gates are more prone to sagging problems and post sizes need to be enlarged. Other types of gates are outside the scope of this calculator.
Can you build a fence at any height?
Although you could build a wood fence any height you like, we limit it to standard heights here. Shave the few inches off each picket, if you choose to build a custom height.
Can you cut picket boards to any width?
You can custom cut your boards to any width you desire, but that will increase your work and potential waste. When ripping boards to custom widths, you will hit knots and other imperfections that will cause some waste. This calculator will provide you with the number of pickets based on their widths.
How much of a fence post should be buried in the ground?
Put in the height of the fence in order to see the length of the posts you need to buy. That is important because at least ⅓ of every post should be buried in the ground and secured with concrete.
How much space between posts?
Start by deciding how long is your fence going to be and how much space you want between posts. Typically, the post space is somewhere between 6 and 8 feet; or 2 and 5 meters, depending on your preference. Put the fence length and the space between posts in the first section of the fence calculator and it will return both the number of posts you should buy and the number of sections defined by the number of posts, which is a value we will need later on.
Why have a privacy fence around your property?
You might wonder why you should even bother building a fence. There are a number of reasons why having a fence around your property is a good idea:
Why do people put picket fences around their houses?
While this may not be an entirely serious reason, the fact remains that to many, a nice white picket fence around your property symbolizes achieving the American Dream.
Can you build a fence the way you like it?
You're free to do it the way YOU like it. As long as you have all the right permits, you are the only one you'll have to answer to regarding the fence's look. No one will try to convince you to do it in a way that's more "fashionable" or tell you how to build a fence that they think would be better (not including your other half).
Is it cheaper to build a fence?
It's cheaper. By using this fence calculator to find out the amount of fencing materials you need, you don't need to buy anything else! With no construction workers or designers to pay, you can save loads of money.
Is it satisfying to build a fence?
It's satisfying. Building a fence may not sound like a very enjoyable activity at first, but here's the thing about DIY - it can give you immense satisfaction. Creating something with your own hands rather than getting it done for you can be an enriching experience, and the pleasure of a job well-done will come back to you every time you see your finished project.
