Place two continuous, 1/4-inch beads of VERSA-LOK Concrete Adhesive on the wall units to be capped (Figure 6). Set the prepared group of cap units in place and press them firmly into the adhesive. Adjust caps as needed.
Full Answer
How much does a pallet of versa Lok cost?
Versa-Lok Standard Unit – Pallet $ 166.32 per pallet The Versa-Lok Standard is the original and most popular retaining wall unit on the market. It is engineered for use in an array of different applications, including straight or curved walls, freestanding walls, columns, and/or stairs.
How do you install versa Lok walls?
VERSA-LOK walls should be placed on a leveling pad of well-compacted gravel, crushed stone or coarse sand approximately 6" thick and 24" wide. The first course of VERSA-LOK units should be embedded below grade approximately 1/10th of the exposed wall height.
How do you install versa-Lok caps?
After completing the top course of your wall, install VERSA-LOK caps, either with a slight overhang (recommended), set back or flush with the wall face. Use VERSA-LOK concrete adhesive to secure cap units to the wall.
What is the weight of a versa Lok retaining wall?
Lincoln Way Landscape Supply is Pennsylvania's largest dealer of Versa-Lok® Retaining Wall Systems. 82lbs. Enter the average length and height in feet for each wall section in the TAN shaded area below. Next, click the CALCULATE button. If you make changes just click CALCULATE each time.
How many square feet is a VERSA-LOK block?
Square Foot is VERSA-LOK's premium cored unit that delivers a full square foot of wall face economically, making it a low-cost alternative for many applications. VERSA-LOK Square Foot CleanCut wall units offer a crisp, contemporary face option....Square Foot CleanCut.Depth (in):12Versa-Tuff Pins per unit:218 more rows
How many VERSA-LOK standard on a pallet?
27 units(27 units per pallet)
How tall can a VERSA-LOK wall be?
How tall can VERSA-LOK walls be built? A. In most situations, VERSA-LOK walls can be built three to four feet tall without engineering or soil reinforcement and can be build to any required height with proper engineering and soil reinforcement.
How do you lay VERSA-LOK blocks?
1:382:30Part 1 - Retaining Wall Installation - Standard unit - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's connected to the course below by these special non-corrosive versa tuff pins inserted into theMoreIt's connected to the course below by these special non-corrosive versa tuff pins inserted into the holes in the top unit. The pins drop into the slots of the unit below.
What is the best block for a retaining wall?
Allan Block (Allan Block Wall Systems) The Allan Block system is widely accepted as a reliable retaining wall block product by contractors and engineers.
How much does a Versa Lok block weight?
82 lbs.Height6″Depth12″Face Area2/3 sq. ft.Weight82 lbs.Weight / Face Area123 lbs./sq. ft2 more rows
How thick are Versa Lok caps?
Cap units put the finishing touch on your VERSA-LOK retaining wall. They're available in two styles—A and B—and are 3-5/8" tall by 14" wide (at the face). Caps can be used with all types of designs. For straight walls, use both caps alternately....A Cap.Depth (in):12Weight (lbs):409 more rows
How wide is Versa Lok block?
*This is the maximum stable unreinforced height for 12-inch deep VERSA-LOK units in optimum conditions....Standard - Weathered.Depth (in):12Face width (narrow) (mm):355.6Face area (sq. ft.):0.667Face area (sq. m.):0.062Minimum radius(ft.):813 more rows
How do you build a freestanding retaining wall?
0:201:41Retaining Wall - How To Build - Menards - YouTubeYouTubeStart of suggested clipEnd of suggested clipStarting at one end lay the base course of blocks. Check regularly to make sure the blocks areMoreStarting at one end lay the base course of blocks. Check regularly to make sure the blocks are straight and level for small walls fill the area behind the blocks with gravel.
Is Versa Lok good?
Stability. Solid VERSA-LOK units are some of the heaviest and most stable units, per wall-face area, in the segmental industry. They are also at least twice as deep as they are high, providing a low, stable center of gravity for each unit during construction and in the finished wall.
How do you stop retaining wall blocks in half?
0:041:05How to Cut Retaining Wall Blocks: Step-by-Step Instructions - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut a 45 degree angle on two blocks. When cut and in place glue the pieces together with concreteMoreCut a 45 degree angle on two blocks. When cut and in place glue the pieces together with concrete adhesive. So that the two block faces. Form the finished outside corner.
How do you install a Versa Lok wall?
0:281:52Part 5 - Base Course - Retaining Wall Installation - Standard unit - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin the base course by carefully placing an aligning standard unit side-by-side in the center ofMoreBegin the base course by carefully placing an aligning standard unit side-by-side in the center of the leveling pad a string line stretched behind the wall will help to achieve a straight alignment to
Lebanon Valley College
What began as a cornfield with a 20-foot grade change today is an award-winning baseball field on the Lebanon Valley (PA) College campus, thanks in large part to the capabilities of VERSA-LOK.
First Street Station
A converted warehouse on a National Scenic Riverway required on-site parking and to control stormwater runoff. VERSA-LOK retaining walls and rain gardens provided the solution.
Atlanta Townhomes
When Southeast Capital Partners, Inc. contracted ECM Modular Walls of Atlanta to build a series of retaining walls that would transform a tree-filled hillside into the 53-unit Brickstone Heights townhome development, they knew there was only one system for the job.
Lebanon Valley College
What began as a cornfield with a 20-foot grade change today is an award-winning baseball field on the Lebanon Valley (PA) College campus, thanks in large part to the capabilities of VERSA-LOK.
First Street Station
A converted warehouse on a National Scenic Riverway required on-site parking and to control stormwater runoff. VERSA-LOK retaining walls and rain gardens provided the solution.
What is a Versa Lok Standard?
The Versa-Lok Standard is the original and most popular retaining wall unit on the market. It is engineered for use in an array of different applications, including straight or curved walls, freestanding walls, columns, and/or stairs. Its simple, all-purpose design makes it a universal favorite among homeowners and contractors alike.
What is a Versa Lok block?
The Versa-Lok Standard is the original and most popular retaining wall unit on the market. This block is designed to work in an array of different applications, including straight or curved walls, freestanding walls, columns, and/or stairs. Its simple, all-purpose design makes it a universal favorite among homeowners and contractors alike.
What is a Versa Lok?
VERSA-LOK ® Retaining Wall Systems has been creating Solid Solutions™ for architects, engineers, contractors and homeowners since 1987. The company pioneered the solid, pinned segmental retaining wall ( SRW) system and holds numerous patents for the top-down, hole-to-slot pinning system. Imitated but never duplicated, VERSA-LOK is well known among landscape architects, specifiers, contractors and homeowners for ease of installation and design flexibility.
What is a Versa-Lok accent unit?
A VERSA-LOK Accent units allows you to create custom eye-catching walls that are perfect for planters, garden beds and smaller retaining walls.
Can you build a VERSA-LOK?
With VERSA-LOK® you can build walls, curves, multi-angle corners, stairs, freestanding walls and columns. No specialty units are required. If you can design it, you can build it with VERSA-LOK®.
How to use the retaining wall calculator?
The retaining wall calculator may seem complicated at first, but don't worry! Just follow this simple set of instructions, and you will get your calculations done in no time.
Retaining wall formulas
The beauty of our retaining wall calculator is the fact that it does all the work for you. We understand, however, that you might be in the mood to do the maths yourself, and hereby present you with all the necessary equations!
What thickness should river slicks be?
For Example: Egg Rock, River Pebbles, and River Slicks should be calculated at a 3″ thickness. Creek Slicks and Mega Slicks should be calculated at a 5-6″ thickness.
Do you need a block below grade for a Versa Lok footer?
Depending on wall size, you might need an extra block below grade for footer. Only use pins if your using a Versa Lok system. Over 3 ft walls could require Geo-Grid reinforcement. Let us know if you need help calculating geo grid.
