Knowledge Builders

how many yards of fabric do i need to recover a dining room chair

by Cali Runte Published 3 years ago Updated 2 years ago
image

It will vary a lot depending on the fabric’s dimensions, the size of the chair, and how much of the chair you want to cover. If you’re looking for a general idea, you will require about 3 yards to 7 yards of fabric. Then, multiply it by the number of chairs if there is more than one.

As a general rule, using 54" wide fabric, 3/4 yard will work for 2 chairs. Three-quarters yards will give you two pieces that are 27" x 27". If you have four chairs, you will need 1.5 yards, six chairs takes 2.25 yards, eight chair seats take 3 yards, and so on.Oct 17, 2008

Full Answer

How much fabric do I need for a dining room chair?

Fabric Requirement Generalization. Most dining room chairs can be covered using a piece of fabric 27 x 27 inches; therefore, plan to use a piece of fabric 27 inches long by 54 inches wide, or about three-quarters of a yard for two chair seats, which does not allow for pattern placement matching but is a general rule.

How much fabric do you need to reupholster a chair?

Wing chair, aka The Grandpa chair, is a much laid-back and long-backed chair. You’re going to need a lot of fabric to reupholster it. If it has a convenient size, you will need around 7 yards of fabric with a standard width.

Can You reupholster two seats of a dining chair?

There are edges and corners to cover as well, no matter what kind of chair you have. For a general rule, you can reupholster two seats of a dining chair with 3/4th of a yard of 54-inch thick fabric. Designed during the 1930s, this Parson’s chair is a common dining chair.

How much fabric do you need to make a Chesterfield chair?

If it has a convenient size, you will need around 7 yards of fabric with a standard width. Traditionally Chesterfield chairs used to have leather as the upholstery. Later down the road, it adopted fabric to cut down the cost. But still, the fabric is chosen to give that aesthetic of leather. You’ll require 7 yards of fabric for this chair as well.

image

How much fabric do I need to recover a dining room chair?

about 3 to 7 yardsYou will need about 3 to 7 yards of fabric to reupholster a chair. This all depends on the type of chair. Simple dining room chairs with no arms, back, and base cushion will need 3 yards of fabric. High wing back, formal chairs will need about 7 yards.

How do you measure a dining room chair for reupholstering?

0:1211:25How To Calculate Yardage to Reupholster Dining Room Chairs ...YouTubeStart of suggested clipEnd of suggested clipSo you can figure every 27 inches across the bolt of fabric. Okay you can get two chairs. So here'sMoreSo you can figure every 27 inches across the bolt of fabric. Okay you can get two chairs. So here's 27 inches one two because there's one two let's see if I can draw upside.

What kind of fabric do you use to reupholster a dining room chair?

The popular synthetic fabrics that are used for the upholstery of dining chairs include materials such as polyester and viscose (which is also commonly known as rayon). Synthetic fabrics are durable and long-lasting.

How many yards do I need to reupholster a chair?

Yardage EstimatesUpholstered FurnitureSectionals: 24 – 34 yardsSquare Ottoman: 2.5 yardsBenches (with backs): 6 yardsBenches (no backs): 3 yardsClub Chairs: 6 – 8 yardsClub Chairs with Ottomans: 8 – 9 yardsBasket Chairs: 5 yardsSwivel/Rockers: 8 yards32 more rows

How much does it cost to reupholster 6 dining room chairs?

Reupholstering six dining chair seats usually costs between $300 to $1,500. The price depends on the amount of fabric needed.

How do you cover dining room chairs with fabric?

3:2920:18How To Upholster a Slip Seat (Dining Room Chair): DIY Tutorial, Step by ...YouTubeStart of suggested clipEnd of suggested clipSo here you see I have cut my piece of fabric. It's approximately 27 by 27 inches this is the faceMoreSo here you see I have cut my piece of fabric. It's approximately 27 by 27 inches this is the face side. I'm going to turn it over to the back side okay.

What is the best fabric to recover chairs with?

Microfiber: Made from polyester, this popular upholstery fabric has a velvet-like texture but is much more durable. It resists water, stains, and fading, so it's great for high-use living areas. Nylon: Rarely used alone, nylon is usually blended with other fibers to make it one of the strongest upholstery fabrics.

Is linen a good fabric for dining room chairs?

What is this? For a classic, fresh look, linen upholstery is a beautiful option for dining room chairs. Linen fabric is made from natural flax fibers, which are strong and will last a long time. It is also a sustainable, eco-friendly fabric with a soft, breathable texture that is comfortable to sit on.

What material is best for recovering kitchen chairs?

A smooth synthetic fabric designed to resist liquids and staining is a better choice for a dining chair than, say, chenille or a velour material, which may attract pet hair or random fibers and dust. Ultrasuede-style materials designed to look like real suede also resist spills while providing durability.

How do I calculate how much fabric I need?

Figure out how much fabric you need with this formula:Width of fabric divided by width of one piece equals the number of pieces that fit into width (rounded down to the whole number).Total number of pieces divided by number of pieces that fit into width equals number of rows you need.More items...•

How do I figure out how many yards of fabric I need?

Dimensions that fit into the width of the fabric Take the total length you need and divide by 36 to calculate how many yards you need. Most of our fabric is sold in full yard increments, so round up to the nearest yard.

How do you measure fabric for a chair?

3:1015:12Figure out HOW MUCH FABRIC you'll need! Easy, pro tips!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that we can measure the outside back. The side side measurement which is what I always do first IMoreSo that we can measure the outside back. The side side measurement which is what I always do first I go side to side and then up and down and then that way when I'm looking at my list of measurements.

How are dining chairs measured?

Hold a tape measure or yardstick next to the chair seat with one end touching the ground. Measure from the floor to the top of the seat to determine the chair's height, which typically is between 18 and 20 inches for a dining chair.

How do you measure to reupholster?

Measure from the bottom of the upholstered area on the back of the couch to the top. If the couch has a curved back, measure at it's highest point. Measure again from the floor to the top of the couch at its highest point. This gives you the height of the upholstered area as well as the total height of the couch.

How much fabric do I need for 6 dining room chairs?

As a general rule, using 54" wide fabric, 3/4 yard will work for 2 chairs. Three-quarters yards will give you two pieces that are 27" x 27". If you have four chairs, you will need 1.5 yards, six chairs takes 2.25 yards, eight chair seats take 3 yards, and so on.

How do you measure fabric for chair upholstery?

Measure the length and width of the front of the sofa. Then, measure the inside and outside of the arms and the seating area with the cushions removed. Once you have your numbers, divide by 36 to determine the yardage. Keep in mind that upholstery fabric is usually 54 inches wide.

How to cut fabric for 6 chairs?

Another method to cut fabric for your six chairs is to use a template. Cut a piece of clear plastic using the measurements you prepared for the first chair. Place it on your fabric, draw around it with chalk or a fabric pen and cut on the lines. Use the plastic piece as a template for the other chairs. Advertisement.

How wide is a dining room chair?

Most upholstery and tapestry fabric is 54 inches wide and will have a pattern repeating twice across the width. Most dining room chairs can be covered using a piece of fabric 27 x 27 inches; therefore, plan to use a piece of fabric 27 inches long by 54 inches wide, or about three-quarters of a yard for two chair seats, ...

How to measure for a seat?

Measure the Seats. Measure the width (side to side) and depth (front to back) of the seats at the widest and deepest part. To these measurements, add 6 inches on each side and 6 inches on the front and back. Mark the measurements on the fabric with a fabric pen or chalk so that you will know where to cut. Write the measurements down, and use them ...

Who is Linda Erlam?

Linda Erlam. Linda Erlam started writing educational manuals in 1979. She also writes a biweekly newspaper column, "Design Dilemmas," in the "Lakeshore News" and has been published in "Design and Drapery Pro" magazine.

Do dining room chairs squeak?

Update the chair covers, update the room. The dining room set still looks good; the wood is fine and the chairs don't squeak, but the seat fabric is a bit outdated and drab. Changing these covers will update the set, and with accurate measuring, you can purchase the correct amount of fabric with confidence. Advertisement.

Best Upholstery Fabrics for Dining Room Chairs

Below, we will show you the six commonly used fabrics to cover dining chairs. We believe you will be able to find the one that best meets your needs.

How Many Yards Of Fabric Do You Need To Reupholster a Dining Chair?

Typically, a dining chair will typically measure around 16 x 18 inches. However, there are still many exceptions.

How to Recover Dining Room Chairs

To reupholster your dining chairs, you need to go through a basic two-step process of preparing the upholstery and attaching the upholstery to the chair. To understand better, let’s take a closer look at the following two main ideas:

Conclusion

Attractive dining chairs are indispensable for a splendid dining room. Whether you are looking to buy a new set of chairs for your dining room or kitchen, or a little more complicated to reupholstering your old chairs, knowing what type of fabric is best for them is essential.

Standard Yardage & Repeat Calculator for Upholstery & Fabrication Projects

With our extensive knowledge and experience in the fabric business, we are happy to provided estimates for your fabrication or upholstery needs. However, our estimates for the yardage needed for your project, are just that: estimate. We also recommend purchasing a few extra yards for insurance, especially if the repeat of the pattern is large.

Yardage Estimates

Add 2 yards for button tufting; add 1.5 yards for skirts on sofas and .75 yards for skirts on chairs.

Fabric Repeat Calculator

To estimate the correct yardage when the vertical repeat is 1/2″ – 27″, add the horizontal repeat to the vertical repeat. For example: A fabric with a 10″ vertical repeat and a 14″ horizontal repeat would have a 24″ total repeat.

Sign Up for Sales & New Arrivals

We offer the highest quality indoor and outdoor decorative fabrics at the best prices for your home or commercial building.

How Much Fabric Do I Need?

It’s important to gauge how much fabric you’ll use in a project. There’s nothing worse than reaching the halfway point of a task to find you can’t finish it.

How to Calculate Fabric Yardage

The first place to start calculating fabric yardage is with the dimensions of your completed project. Remember to factor in the item’s intended purpose.

How Does Fabric Type Effect Yardage

Fabric is available in a range of types, styles, and widths. There are several differences between one style of fabric and another. Your intended project will determine which material you choose and how much you buy.

How Many Yards of Fabric Do I Need?

For commercial patterns, fabric yardage for clothing and some home décor projects is written on the back of the packet. You only need to add extra fabric to pattern match something like a bold print, tartan, or a stripe. Other things like seam allowance, special effects, and trims, are all included in the pattern details.

Fabric Yardage Calculator

To make life easy when it comes to deciding on fabric needs, you can use a fabric yardage calculator. Available for a multitude of projects, from clothing to upholstery, a fabric calculator can take the headache out of fabric buying. Simply enter your project dimensions and let the fabric calculator do the math for you.

Conclusion

When it comes to fabric, the amount you buy depends on the project, fabric type, and width. As a rule of thumb, it’s better to overestimate than try to buy the exact amount. That way, you’ll have wriggle room for errors. Besides, you can use the leftovers for matching accessories or even throw pillows.

image

1.How Much Fabric to Reupholster a Chair: A Complete Guide

Url:https://www.fabricfits.com/how-much-fabric-to-reupholster-a-chair/

12 hours ago 3 rows · Dining Room Chairs. Number of Chairs. yards needed. 2 chairs. 1 to 1.5 yards. 4 chairs. 1.5 ...

2.How Much Fabric Is Needed for 6 Dining Room Chairs?

Url:https://www.hunker.com/13403729/how-much-fabric-is-needed-for-6-dining-room-chairs

16 hours ago How Many Yards Of Fabric Do You Need To Reupholster a Dining Chair? Typically, a dining chair will typically measure around 16 x 18 inches. However, there are still many exceptions. If you are really a gauger, you can get a glimpse and know the chair’s measurements. Then you can proceed to cut the fabric, recover the dining room chair right away.

3.6 Best Fabrics for Reupholstering Dining Room Chairs

Url:https://juniper-studio.com/best-upholstery-fabrics-for-dining-room-chairs/

31 hours ago I know the rule of thumb is 3/4 yard per chair, but no one seems to know how much for the welting around each cushion. ... ON SALE - UP TO 75% OFF Bathroom Vanities Chandeliers Bar Stools Pendant Lights Rugs Living Room Chairs Dining Room Furniture Wall Lighting Coffee Tables Side & End Tables Home Office Furniture Sofas Bedroom Furniture Lamps ...

4.Need help ordering enough fabric to recover dining room …

Url:https://www.houzz.com/discussions/200686/need-help-ordering-enough-fabric-to-recover-dining-room-chairs

33 hours ago  · Bernie talks you through measuring fabric - plain or patterned - for your dining room chair (slip seat) project.

5.Videos of How Many Yards Of Fabric Do I Need to Recover a Dinin…

Url:/videos/search?q=how+many+yards+of+fabric+do+i+need+to+recover+a+dining+room+chair&qpvt=how+many+yards+of+fabric+do+i+need+to+recover+a+dining+room+chair&FORM=VDRE

2 hours ago 6 yards: Benches (no backs): 3 yards: Dining Chairs:.75 – 2 yards: Desk Chairs: 2 – 4.5 yards: Club Chairs: 6 – 8 yards: Club Chairs with Ottomans: 8 – 9 yards: Wing Chairs: 5- 7 yards: Chesterfield: 6 – 7 yards: Basket Chairs: 5 yards: Swivel/Rockers: 8 yards: Barcelona Chair: 3 yards: Corner Chair: 6 yards: Recliners: 7 – 8 yards: Parsons Chair (upholstered legs): 3 yards

6.This Chart Shows You How Much Fabric You Need to

Url:https://lifehacker.com/this-chart-shows-you-how-much-fabric-you-need-to-reupho-1686187809

28 hours ago For this example, you’d need 2 yards. If you are using a fabric that needs to be pattern matched, measure the pattern repeat and add that amount to the yardage. If the repeat is 6 inches lengthways and 6 inches across the width, add the two together to get 12 inches. Multiply this by the number of pattern piece rows.

7.How To Calculate Yardage to Reupholster Dining Room …

Url:https://www.youtube.com/watch?v=mWjy92L4c9c

11 hours ago

8.Yardage Guide

Url:https://www.aidenfabrics.com/productsandservices/products/yardageestimates/

29 hours ago

9.How Much Fabric Do I Need? [Fabric Yardage Calculator]

Url:https://silverbobbin.com/how-much-fabric-do-i-need/

32 hours ago

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9