...
i-STAT CHEM 8+ Cartridge.
Qty | Price Ea. | |
---|---|---|
1 - 3 | $592.80 | 1 - 3 $592.80 |
4 - 20 | $561.60 | 4 - 20 $561.60 |
21 - 50 | $549.12 | 21 - 50 $549.12 |
51 + | $530.40 | 51 + $530.40 |
What is an Istat cartridge?
The CHEM 8+ i-STAT cartridge is a single-use in vitro diagnostic test contained in a pocket sized cartridge. It performs a battery of tests and is designed for the i-STAT 1 Handheld Analyzer system. Price Ea. Click to see full answer. Similarly, it is asked, how much does an iSTAT cost?
Who is the manufacturer of ISTAT 1?
Manufacturer: Abbott For use with the i-STAT 1 System, which is intended for use in the in vitro quantification of pH, PO2, PCO2, and lactate in arterial or venous whole blood in point-of-care or clinical laboratory settings Results in less than 2 minutes
What is the Chem 8+ i-STAT cartridge?
The CHEM 8+ i-STAT cartridge is a single-use in vitro diagnostic test contained in a pocket sized cartridge. It performs a battery of tests and is designed for the i-STAT 1 Handheld Analyzer system.
What is an Istat portable analyser?
i-STAT Portable Clinical Analyser. The Abbott i-STAT portable clinical analyser is a true Point Of Care analyser designed to be used at the patient's bedside for critical care tests such as blood gases, electrolytes, metabolites and coagulation. Which iSTAT cartridges are waived?
How long can i-STAT cartridges be stored?
14 daysCartridges may be stored at room temperature (18 to 30°C) for 14 days. Cartridges should never be returned to the refrigerator once they have been at room temperature, and should not be exposed to temperatures above 30°C.
What are i-STAT cartridges?
• i-STAT cartridges – single-use, disposable cartridges for whole-blood testing. They are inserted into the analyser after the blood sample has been applied. A large number of cartridges are available to test the most common test-specific indicators in different combinations.
Is i-STAT FDA approved?
The I-STAT BLUE CHEM8+ and CG4+ cartridges are not FDA cleared and do not have CLIA waived status. CLIA recognizes two types of laboratory tests: waived and non-waived. Different CLIA standards apply to waived and non-waived tests as well as the facilities that perform these types of tests.
Which i-STAT cartridges are waived?
According to a Customer Communication from Abbott on 2/28/2020, the FDA has cleared the Abbott i-STAT BLUE CHEM8+ cartridges for use with venous or arterial whole blood for all analytes. The FDA has categorized these tests as moderate complexity. The i-STAT BLUE CHEM8+ cartridge is no longer CLIA-waived.
How accurate is i-STAT?
The i-STAT® manufacturer also recommends “haematocrit adjusting” using total plasma protein level to adjust the i-STAT®- measured Hct. This resulted in acceptably accurate Hct measurement (mean 0.53% with 1.46% standard deviation).
How do you fill an i-STAT cartridge?
Cartridge can be filled directly from the finger. Venipuncture and arterial puncture: plain plastic syringe without anticoagulant. to 20 gauge needle). Alternately, a plain syringe or plain collection tube and disposable transfer device can be used if the sample is tested within one minute of patient draw.
What tests can an Istat run?
These tests include arterial and venous blood gas and electrolytes, common metabolites, cardiac troponin I (TnI), Hct and Hb, and coagulation tests such as the INR and ACT.
Which Istat cartridges are CLIA waived?
At this time, only the i-STAT CHEM8+ cartridge is waived. All other i-STAT cartridges are non-waived. It is the responsibility of the facility performing the laboratory tests to meet the CLIA requirements.
Is Istat waived?
FDA-cleared and CLIA-waived. NOTE: All hardware comes with one-year manufacturer's warranty.
Does Istat test for glucose?
Glucose (Glu) The i‑STAT System test for glucose measures glucose amount-of-substance concentration in the plasma fraction of arterial, venous, or capillary whole blood (dimension mmol L‑1) for in vitro diagnostic use.
What does i-stat stand for?
International Society of Transport Aircraft Trading.
Who manufactures Istat?
Abbotti-STAT 1 | Abbott Point of Care.
Broad test menu
Single-use i-STAT test cartridges offer a broad menu of tests on a single, portable platform. Each test cartridge has a unique combination of biosensors to suit a wide range of clinical needs.
Easy to use
Testing can be performed in 4 simple steps at the patient’s side with only 2 to 3 drops of whole blood. Clear and comprehensive instructions help the operator through the testing process.
Portable
Testing and obtaining time-sensitive results at the patient’s side streamlines the testing process and eliminates process steps, handoffs and delays to help reduce errors, enable rapid decision-making, and optimize patient-care. 1,2
Connected
The i-STAT 1 can connect to multiple data management systems including Abbott Info HQ® or AEGISPOC TM - to integrate seamlessly with your Laboratory Information System, Electronic Medical Records or both to help you manage test results, operators and devices.
Realize the benefits of point-of-care testing
View actual metrics from facilities who have implemented testing with the i-STAT System.