How many bags of concrete do I need calculator?
How many 80 pound bags of concrete does it take to make 1 yard?
How many cubic feet are in a 60 pound bag of concrete?
How much area does a 50 lb bag of quikrete cover?
Can you use quikrete for a slab?
How many cubic feet is a 5 gallon bucket?
Is quikrete as strong as concrete?
See 2 more
How much area is in a bag of concrete?
one 20kg bag will cover an area of 1.1m2 to a depth of approximately 10mm. or 108 x 20kg bags equates to one cubic metre of mixed concrete.
How many bags of concrete do I need for a 10x10 slab?
How many bags of concrete do I need for a 10×10 slab at 4 inch thick. At 4 inch thick, for a 10×10 slab, you will need either seventy four 60- pounds or fifty six 80- pounds or 112- 40- pounds bags of concrete. Thus, either 74- 60lb or 56- 80lb or 112- 40lb bags of concrete will be required for a 10×10 slab at 4″ thick ...
How many sq ft does an 80lb bag of concrete cover?
An 80 pound bag of concrete, 2″ thick, will cover 3.6 square feet. An 80-pound bag of concrete, 4″ thick, will cover 1.8 square feet. An 80 pound bag of concrete, 6″ thick, will cover 1.2 square feet.
How much concrete does an 80lb bag make?
approximately .60 cu ft.One 80lbs bag of Quikrete Concrete Mix will yield approximately . 60 cu ft. So it will take 45 bag to equal one cubic yard of concrete.
What is a cheaper alternative to concrete?
Composite Cement The Bautex wall system which comes from the use of composite materials and foam beads is a great alternative to concrete. It's strong and requires a lot less energy when compared to traditional concrete and cement.
Do you need rebar for a 10x10 concrete slab?
Concrete slabs for most residential purposes don't require rebar grids smaller than 12”, so it isn't likely you'll use too much steel. Concrete needs to surround and encapsulate the steel, so as long there is space for it to flow around the steel, you're good to go.
How do I calculate how many bags of concrete I need?
For concrete, the formula for volume is as follows: length x width x thickness. To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: 40 pound bag yields .011 cubic yards.
How thick does a concrete slab need to be?
4 inchesStandard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.
How much does it cost for a 12x12 concrete slab?
The average cost for a standard 12′ x 12′ shed concrete slab costs roughly: $720 – $1,200. or $6 – $10.00 per square foot. However, costs can rise if you'd like to have something decorative as a stamped concrete patio, or if you're looking to have curves and other decorative edging features installed.
How much does a bag of concrete cost?
Pre-mixed concrete bagsPRE-MIXED BAGSAVERAGE COST PER BAGMortar Mix (60 lb.)$6.04High Early Strength Cement (80 lb.)$6.65Portland Cement I and II (93 lb.)$13.75Masonry Cement (70 lb.)$11.501 more row•Jun 8, 2022
How many bags of concrete do I need for a 12x12 slab?
As per calculation, for a 12×12 slab at 4 inch thick, generally you will need approximately either 104 bags of 60lb or 80 bags of 80lb of premixed concrete, at 5 inches thick slab, either 131 bags of 60lb or 100 bags of 80lb premixed concrete are required, while at 6 inches thick slab, either 157 bags of 60lb or 121 ...
How much concrete do I need for a 4x4 slab?
How much concrete do I need for a 4×4 slab?”, at 4 inches thick, generally you will need approximately 0.20 cubic yards or 5.28 cubic feet or 0.15 m3 (either 12 bags of 60lb or 9 bags of 80lb) of premixed concrete for a 4×4 slab, at 5 inches thick slab, 0.247 cubic yards or 6.66 cubic feet or 0.189 m3 (either 15 bags ...
How much does it cost to pour a 10x10 concrete slab?
To pour a typical 10x10 concrete slab will cost $670 to $930, a 12x12 slab for a patio will cost $796 to $1,476, a 20x24 driveway slab runs between $1,440 and $3,360, and a 24x24 slab for a garage will cost $3,058 to $5,944. Get free estimates from concrete companies near you.
How many square feet does a 50 lb bag of cement cover?
A 50 lb bag of concrete approximately cover around 1.5 square feet area upto standard depth of depth of 3 inch for your patio and sidewalk. A bag of 50 pound yields 0.375 cubic feet, thickness of slab 3″= 0.25 feet, so, a 50 lb bag of concrete covers = 0.375 ÷ 0.25 = 1.5 square feet.
How many bags of concrete do I need for a 8x10 slab?
Regarding this, “how much concrete do I need for a 10×8 slab?”, at 4 inches thick, generally you will need approximately 0.98 cubic yards or 26.4 cubic feet or 0.748 m3 (either 58 bags of 60lb or 45 bags of 80lb) of premixed concrete for a 10×8 slab, at 5 inches thick slab, 1.23 cubic yards or 33.28 cubic feet or 0.942 ...
How many bags of concrete do I need for a 12x12 slab?
As per calculation, for a 12×12 slab at 4 inch thick, generally you will need approximately either 104 bags of 60lb or 80 bags of 80lb of premixed concrete, at 5 inches thick slab, either 131 bags of 60lb or 100 bags of 80lb premixed concrete are required, while at 6 inches thick slab, either 157 bags of 60lb or 121 ...
How much does a bag of concrete cover (80 lb, 60 lb, 40 lb)
How much does a bag of concrete cover. Concrete ready mix made of blended mix of Portland cement, sand gravel and other approved ingredient, generally, dry ready mix concrete are available in different bag size and weight condition such as 40lb, 50lb, 60lb bag, 80lb bag and 90lb bag.
60 lb. Concrete Mix at Lowes.com
Save Time With 60 Ready Mix Concrete. If you're planning a new patio, sidewalk or driveway, 60 concrete mix is essential. Ready 60 mix concrete is a great option if you're pouring concrete at least 2 inches thick.
How to Calculate How Much Quikrete to Use - Home Guides
Divide the total cubic feet needed by the total cubic feet that can be made from one bag of Quikrete Concrete Mix. Quikrete's Concrete Mix yield's about .15 cubic feet for every 20 pounds of mix ...
How much area does a 60 lb bag of concrete cover?
A 60 lb. bag provides 0.45 cubic feet of cured concrete. A 80 lb. bag provides 0.6 cubic feet of cured concrete.
How many bags of concrete do I need for a post hole?
Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.
What is a cheaper alternative to concrete?
There are a few different types you can find in the home improvement store that can replace concrete cement used for driveways and walkways. These include pea gravel, crushed stone, and quarry process. Cheaper than other surface materials and low- cost to install.
How much concrete do I need for a 40×60 slab?
On average, the amount of concrete you will need for a 40×60 slab for a barndominium will be $9,500 to $14,400. This calculation takes into factor the area of the slab, the cost of the concrete mix, and the national average of labor and materials you will need for the job.
How many bags of cement can build a 3 bedroom house?
While for a normal or a medium size of a three bedroom flat it will take around 2700 blocks and 155 bags of cement will be enough to build a 3 bedroom flat.
How many bags of cement do I need for 1000 blocks?
For laying bricks and blocks in normal applications (SABS Class II) To lay 1000 bricks = 3 bags cement + 0.6 cu. m.
Is it cheaper to make your own concrete?
One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.
How many feet does a bag of concrete cover?
Quikrete’s Concrete Mix yield’s about. 15 cubic feet for every 20 pounds of mix, so a 40-pound bag yields. 30 cubic feet, 60 pounds of concrete mix yields. 45 cubic feet and an 80-pound bag yields.
How do I figure out how many bags of concrete I need?
To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: 40 pound bag yields.011 cubic yards.
How many 80lb bags of concrete do I need for 3 yards?
An 80# bag of pre-mixed cement, sand and gravel ( CONCRETE) is 0.6 cubic foot per the bag. There are 27 cubic feet in a cubic yard. So 27 / 0.6 = 45 80# bags.
What is a cheaper alternative to concrete?
There are a few different types you can find in the home improvement store that can replace concrete cement used for driveways and walkways. These include pea gravel, crushed stone, and quarry process. Cheaper than other surface materials and low- cost to install.
How many bags of concrete do I need for a post hole?
Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.
How much does 4 yards of concrete cost?
Each cubic yard of concrete costs $119 to $147 per cubic yard delivered.
How many cubic feet is a 5 gallon bucket?
Since a one- gallon pail is equal to 0.134 cubic feet, a standard five- gallon bucket equals exactly 0.67 cubic feet. We’ll explain how we arrived at that number, what exactly is a cubic foot, how you can calculate it yourself and some uses for the five – gallon bucket.
How many feet does a bag of concrete cover?
Quikrete’s Concrete Mix yield’s about. 15 cubic feet for every 20 pounds of mix, so a 40-pound bag yields. 30 cubic feet, 60 pounds of concrete mix yields. 45 cubic feet and an 80-pound bag yields.
How to calculate how many bags of concrete you need?
To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: 40 pound bag yields.011 cubic yards.
How many cubic feet is an 80 lb bag of concrete?
Each 80 – pound bag of QUIRKETE® Concrete Mix yields approximately 0.6 cubic feet. For a placement of 99” by 68” at 4-1/2” thick, you will need 30 bags, of 80 -pounds each. Yields will vary with waste, uneven subgrade, etc.
How many 80lb bags of concrete do I need for 3 yards?
An 80# bag of pre-mixed cement, sand and gravel ( CONCRETE ) is 0.6 cubic foot per the bag. There are 27 cubic feet in a cubic yard. So 27 / 0.6 = 45 80# bags.
What is a cheaper alternative to concrete?
There are a few different types you can find in the home improvement store that can replace concrete cement used for driveways and walkways. These include pea gravel, crushed stone, and quarry process. Cheaper than other surface materials and low- cost to install.
How many cubic feet is a 5 gallon bucket?
Since a one- gallon pail is equal to 0.134 cubic feet, a standard five- gallon bucket equals exactly 0.67 cubic feet. We’ll explain how we arrived at that number, what exactly is a cubic foot, how you can calculate it yourself and some uses for the five – gallon bucket.
How many bags of concrete will fit in a mixer?
Heavy-duty paddles mix the concrete to a uniform consistency. This concrete mixer can fit up to two bags of concrete.
Where to find Quantity and/or Coverage Calculations for Quikrete?
Quantity and/or coverage calculations for all QUIKRETE® products can be found on all Spec Data sheets .
How deep should a post hole be?
Remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6 feet above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground). The calculator will indicate the number of 50 lb. bags of QUIKRETE® Fast-Setting Concrete you need.
How many ounces of QUIKRETE mortar joint sealant?
The calculator will indicate the number of 10.1 oz. tubes of QUIKRETE ® Polyurethane Mortar Joint Sealant or 10.1 oz tubes of Mortar Repair you will need for your project.
How deep should a sandbox be?
The calculator will indicate the number of bags you will need to fill the sand box at a 2", 3", 4", 5" and 6" depth.
How much does a 50 lb bag of concrete cover?
Regarding this, how much does a 50 lb bag concrete cover?, as 133 lb concrete = 1 CF, so a bag of 50 lb concrete = 50/133 = 0.375 CF, therefore, a 50 lb bag of concrete approximately cover around 1.5 square feet area upto standard depth of depth of 3 inch for your patio and sidewalk.
How many bags of concrete is in a cubic foot?
Regarding this, how many 50 lb bags of concrete do i need in a cubic foot?”, as 1 cubic foot concrete = 133 lb, so 50 lb bags of concrete = 133/50 = 2.66 bags, therefore, you will need approx 2.66 bags of 50 lb concrete in a cubic foot and hence 2.66 bags of 50 lb of ready mix concrete used to make 1 cubic foot of concrete.
How much does concrete weigh?
Weight of Ready mix concrete in dry condition is about 133 lbs per cubic foot, 3600 lbs per cubic yard, 17.826lb/ gallon, 21.36kN/ m3, 2.136kg/ litre, 1.234 oz/ inch3, or which is approximately equal as 2136 kg per cubic meter. The weight of concrete is determined by its density, which can vary based on the amount of aggregate, water, and air in the mix.
How many gallons of concrete is in a 50 lb bag?
A bag of 50 lb concrete is premixed of cement, sand and gravel as concrete, as we know 1 gallon concrete weighs around 17.826 pounds, so volume of a 50 lb bag of concrete = 50/17.826 = 2.8 gallons, therefore volume of 50lb bag of concrete is about 2.8 gallons.
How many cubic feet is a 50 lb bag of concrete?
Volume of a 50 lb bag of concrete:- a 50 lb bag of concrete yields 0.375 cubic feet volume which is approximately equal as 0.0138 cubic yards or 2.8 gallons or 10.62 liters volume of concrete.
What is 50 lb of concrete?
50lb bags of concrete mix is ideal for both structural and non structural application for 2 inch thick or more, 50lb bag of Concrete Mix can be used for building or repairing foundation walls, fence post, sidewalks, curbs, steps and ramps and for setting posts and others concrete structure like, footing, slab, beam and columns.
How many bags of concrete do I need calculator?
Use the following yields per each bag size: 40 pound bag yields. 011 cubic yards. 60 pound bag yields.017 cubic yards.
How many 80 pound bags of concrete does it take to make 1 yard?
how many 80lb bags of concrete are in a yard? You will need 45 bags of concrete mix to make a cubic yard of concrete. There’s 27 cubic feet of concrete in a cubic yard.
How many cubic feet are in a 60 pound bag of concrete?
how many cubic feet in 60 lb. bag. Each 60-pound bag of QUIKRETE® Concrete Mix will yield approximately 0.45 cubic feet of mixed concrete.
How much area does a 50 lb bag of quikrete cover?
One 50-pound bag of Quikrete Fast Setting Concrete Mix yields about. 375 cubic feet. For example, if you need to cover 33.333 cubic feet, using 60- pound bags of concrete, divide 33.333 cubic feet by. 45 cubic feet to get 74.07 total bags of concrete.
Can you use quikrete for a slab?
Concrete is one of the most economical, versatile and durable building materials available. Build a sidewalk, patio, or floor with QUIKRETE concrete mixes no matter your skill level.
How many cubic feet is a 5 gallon bucket?
Since a one- gallon pail is equal to 0.134 cubic feet, a standard five- gallon bucket equals exactly 0.67 cubic feet. We’ll explain how we arrived at that number, what exactly is a cubic foot, how you can calculate it yourself and some uses for the five – gallon bucket.
Is quikrete as strong as concrete?
Quikrete fast setting concrete is just as strong as regular concrete. Concrete gets its strength from a chemical reaction that occurs over time during curing. After it’s had time to cure, which usually take 28 days to complete, Quikrete can reach strengths up to 5000 psi.
