APPLICATION RATES: CUTRINE PLUS is applied at a rate of 0.6 gallon per acre-foot (43,560 cubic feet) of water to be treated for planktonic and filamentous algae, 1.2 gallons per acre-foot for Chara and Nitella
What is the rate of application for cutrine plus?
APPLICATION RATES: CUTRINE PLUS is applied at a rate of 0.6 gallon per acre-foot (43,560 cubic feet) of water to be treated for planktonic and filamentous algae, 1.2 gallons per acre-foot for Chara and Nitella and 1.2 to 3.0 gallons per acre-foot for Hydrilla.
How do you use cutrine Plus on algae?
For Filamentous and Planktonic Algae, use 1 gallon of Cutrine-Plus Liquid per 1.5 acre-ft of treated water. For Chara, use 2 gallons of Cutrine-Plus Liquid per 1.5 acre-ft. of treated water. Dilute with a minimum of 9 parts water. Spray uniformly over the water surface as a rain of coarse droplets.
How do you use cutrine Plus on Chara?
For Chara, use 2 gallons of Cutrine-Plus Liquid per 1.5 acre-ft. of treated water. Dilute with a minimum of 9 parts water. Spray uniformly over the water surface as a rain of coarse droplets. Contact with Filamentous Algae will be improved by breaking apart heavy surface mats before application.
How much cutrine do I put on my lawn?
CUTRINE®-PLUS- is applied at a rate of 0.6 gallon per acre-foot (43,560 cubic feet) of water to be treated for planktonic and filamentous algae, 1.2 gallons per acre-foot for Chara and Nitella and 1.2 to 3.0 gallons per acre-foot for Hydrilla.
What is the mix ratio for Cutrine plus?
Mix Cutrine Plus with enough water to ensure and even application. When using a backpack sprayer or handheld pump sprayer mix 1 gallon of Cutrine Plus to 9 gallons of water. When using a professional skid sprayer or power sprayer, use a 50:1 ratio. For more specific application rates please refer to the label.
How much algaecide do I need for 1 acre pond?
You will use 1. 5-2 gallons per surface acre of pond.
Does Cutrine plus need surfactant?
Cutrine Plus Algaecide does not require you to add a surfactant. 42 of 43 people found this answer helpful.
How long does it take Cutrine Plus to work?
Cutrine-Plus is hard water stable. Far less corrosive than other common algaecides. Begins to work immediately on contact to break down algaes cellular structure. Controls Planktonic Algae in 1 to 2 days, Filamentous Algae in 3 to 4 days.
How do you mix Cutrine Plus with water?
Tank mix 3 gallons of CUTRINE-PLUS® with 2 gallons of HARVESTER®. Ap- ply mixture at the rate of 5 gallons per surface acre. Dilute with at least 9 parts water and apply as a surface spray or underwater injection. Observe all cautions and restrictions on the labels of both products used in this mixture.
How do you apply Cutrine plus?
Apply Cutrine Plus Liquid Algaecide with a sprayer at a rate of 0.6 to 1.2 gallons per acre foot of water when algae begins to grow and water is over 60°F. Dilute 1 part Cutrine Plus to 9 parts water and spray as evenly as is practicable over the surface of the water.
Can I use Cutrine plus in my pool?
Is this safe to use Cutrine Plus Algaecide in swimming pool? No, Cutrine Plus Algaecide is designed for use in large bodies of water such as ponds, lakes, and reservoirs and not in small containerized water. 2 of 3 people found this answer helpful.
Can you mix diquat and Cutrine plus?
Diquat mixed with Cutrine Plus and a surfactant will kill pretty much any vegetation and algae that it is sprayed directly on. That is a great combination for treating areas with many different types of vegetation and algae!
How do I put algaecide in my pond?
0:051:17How to Apply Algaecide to a Pond in Spring - YouTubeYouTubeStart of suggested clipEnd of suggested clipBefore applying the side we will turn off the waterfall. And then sprinkle the algae. Side over theMoreBefore applying the side we will turn off the waterfall. And then sprinkle the algae. Side over the waterfall. And let it. Set. After the algaecide sets for about an. Hour. Then we take a scrub brush.
How can I make my pond blue?
0:245:49How to Dye a Pond for $20 - Reduce Algae and Weed Growth - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it gets deeper as you get to the far side of the pond. And you can see it has kind of a greenMoreAnd it gets deeper as you get to the far side of the pond. And you can see it has kind of a green color to it. Um i did dye it this was about um two and a half three months ago that i dyed it once.
How do you treat filamentous algae?
Herbicide Control of Filamentous Algae Herbicide control is a great option for Filamentous Algae because you can literally apply the herbicide and then sit back and let it do its work. Most herbicides can control Filamentous Algae throughout the season and only needs to be applied once a year.
Can you eat fish from a pond treated with copper sulfate?
There are no restrictions on swimming, eating fish from treated water bodies, human drinking water, pet/livestock drinking water, or irrigation. Copper is an element, and so is not broken down like other herbicides.
How many gallons of algaecide do I need?
Pool Algaecide: Initial Dosage: 12 oz. per 10000 gallons. Maintenance Dosage: 3 oz. per 10000 gallons, weekly.
What happens if you put too much algaecide in a pond?
If you use too much, it can deplete the levels of oxygen in your pond, causing plants and fish to die. When using algaecide, remember that aeration is needed to keep your fish alive while the chemicals are working.
When should I add algaecide to my pond?
Green Clean Algaecide for Koi PondsRecommended Application Rate: 1lb treats 1,000 gallons of water.Apply in the morning hours of a calm sunny day when water temperatures are at least 50˚ F or warmer.Turn off water circulations pumps (for waterfalls or streams)Apply product to algae covered rocks or streams.More items...•
How long does it take algaecide to work in a pond?
After treating one section, you can wait 7-10 days for the water to re-balance and determine if a second treatment is required. If it is, treat the second section and repeat the process until algae is under control.
How effective is Cutrine Plus?
Effective on Hydrilla when combined with Harvester Liquid. Cutrine-Plus Liquid is hard water stable. Far less corrosive than other common algaecides. Begins to work immediately on contact to break down algae's cellular structure. Controls Planktonic Algae in 1 to 2 days, Filamentous Algae in 3 to 4 days.
How much cutrine plus to use for hydrilla?
For Hydrilla, use 2 gallons of Harvester Liquid mixed with 3 gallons of Cutrine-Plus Liquid per 1 acre to be treated. Dilute mixture with a minimum of 9 parts water and apply as a surface spray or by underwater injection. Add Cygnet-Plus Liquid to increase penetration and contact.
What is Cutrine Plus Liquid?
Cutrine-Plus Liquid is ideal for treating surface growth of Planktonic Algae and floating mats of Filamentous Algae.
How much cutrine plus liquid to use for algae?
For Filamentous and Planktonic Algae, use 1 gallon of Cutrine-Plus Liquid per 1.5 acre-ft of treated water. For Chara, use 2 gallons of Cutrine-Plus Liquid per 1.5 acre-ft. of treated water. Dilute with a minimum of 9 parts water.
Is cutrine plus toxic to fish?
Cutrine- Plus Liquid may be toxic to Trout if carbonate hardness of treated water is less than 50 ppm. Most surface waters exceed this limit and pose no threat. If in doubt, use the Water Hardness Test Strips. Do not use in water containing Koi or hybrid goldfish.
What is Cutrine Plus Algaecide?
Cutrine Plus Algaecide is effective in controlling a broad range of algae including Chara, Spirogyra, Cladophora, Vaucheria, Ulothrix, Microcystis, and Oscillatoria. We recommend applying Diquat Water Weed and Landscape Herbicide for the eradication of duckweed, cattail and willow.
Can you use Cutrine Plus on catfish?
Cutrine Plus is intended for large bodies of water and cannot be used in small ponds containing koi or gold fish, it does not list that is cannot be used around catfish. Crystal Plex Algae Control might be something is better for your small pond.
Can dogs drink cutrine?
If I treat my pond for bottom growing algae with Cutrine Plus Algaecide, is it safe for my dog to drink the water? A. Yes, it is fine to use Cutrine Plus Algaecide in water where animals may drink. You may just want to wait about an hour for the treatment to settle first.
Does Cutrine Plus kill algae?
Cutrine Plus Algaecide only kills different forms of algae in a pond or lake and will not kill aquatic weeds. If you are looking to kill water lilies and other weeds you would use a product like SePro Sonar RTU Aquatic Herbicide.
What is CUTRINE PLUS?
CUTRINE PLUS Treats surface and sub-surface algae and is registered for use in:Potable Water Reservoirs, Farm, Fish and Industrial Ponds, Lakes Fish Hatcheries and Raceways, Irrigation Conveyance Systems, Ditches, Canals, Laterals Golf Course Water Hazards CUTRINE PLUS is an algaecide which controls existing algae and inhibits rapid re-infestation and CUTRINE PLUS also acts as a herbicide in controlling the rooted underwater weed Hydrilla verticillata. liquid formulation which contains 27.9% active ingredient. Has a specific gravity of 1.21 (10.1 lbs. per gallon). Controls algae at 0.2 to 0.4 ppm copper and hydrilla at 0.4 to 1.0 ppm copper. Controls all three forms of algae: planktonic, filamentous and chara.
Is cutrina plus toxic to trout?
CUTRINE PLUS need sunlight to optimize effectiveness. CUTRINE PLUS can be toxic to trout, at the recommended application rates, if the water has less than 50 ppm of carbonate hardness (soft water). Do not use in waters containing Koi and hybrid goldfish. Not intended for use in small volume, garden pond systems.
How much water is used for CUTRINE?
CUTRINE®-PLUS- is applied at a rate of 0.6 gallon per acre-foot (43,560 cubic feet) of water to be treated for planktonic and filamentous algae, 1.2 gallons per acre-foot for Chara and Nitella and 1.2 to 3.0 gallons per acre-foot for Hydrilla.
What is CUTRINE PLAS?
CUTRINE®-PLUS is U.S.E.P.A. registered for use in drinking water reservoirs, farm fish and industrial ponds, golf course water hazards, lakes, fish hatcheries and raceways, irrigation water conveyance systems such as canals, laterals and ditches.
How many gallons of cutrine is in a hydrilla?
Hydrilla can be treated by surface spray or underwater injection. CONTAINER SIZES: CUTRINE®-PLUS is available in 1 gallon ( packed 4 to a case), 2 1/2 gallon (packed 2 to a case), 5 gallon, 30 gallon, 55 gallon and 275 gallon containers. NOTE:
Is CUTRINE treated water corrosive?
CUTRINE®-PLUS is far less corrosive to equipment and other metal surfaces than other chelated copper compounds. CUTRINE®-PLUS treated water can be used for swimming, domestic uses and livestock watering immediately after chemical application.
Is cutrine good for trout?
CUTRINE®-PLUS need sunlight to optimize effectiveness. CUTRINE®-PLUS is not completely effective against Pithophora and diatoms. CUTRINE®-PLUS can be toxic to trout, at the recommended application rates, if the water has less than 50 ppm of carbonate hardness (soft water). OF SPECIAL INTEREST: