Cost of Pool Pavers
| Pool Pavers Costs | Zip Code | Sq. ft. | |
| Basic | Better | Best | |
| Pool Pavers – Material Prices | $490.00 - $525.00 | $577.50 - $665.00 | $822.50 - $1032.50 |
| Pool Pavers – Installation Cost | $2187.50 - $2222.50 | $2275.00 - $2677.50 | $2730.00 - $2800.00 |
| Pool Pavers – Total | $2677.50 - $2747.50 | $2852.50 - $3342.50 | $3552.50 - $3832.50 |
What is the average cost of building a pool deck?
Written by HomeAdvisor. On average, building a pool deck costs around $5,000. Most homeowners pay between $3,000 and $12,000 for this project. Where you fall on that range depends on the materials you choose, the size of the patio, and the difficulty of the terrain.
How much does it cost to remodel a pool deck?
You should expect to budget between $2,500 and $5,000 for basic packages, but pool deck and pool plaster upgrades can drive the cost up significantly. It all depends on the price and quality of the finishes you choose, as well as the size of the area you want to refinish.
How much does a stamped concrete pool deck cost?
Stamped Concrete Pool Deck Price Stamped or textured concrete is a customized version of poured concrete, with a price between $12 and $20 per square foot including labor. While the poured substance is still wet, the builder will stamp it to look like stones, brick, or a range of other materials.
How to install pavers over pool deck?
Here are the detailed instructions:
- Using a garden hose, spray over entire concrete slab and check for fall off and slopes. ...
- Drill holes in the concrete slab all the way down to the dirt; the holes should be approximately 1 inch in diameter and should be about 18” apart ...
- Fill the holes with a small rock such as Pea Gravel.
How much does it cost to put pavers on pool deck?
The Cost of Pool Pavers & Paver Installation On average, the cost of pool paving materials varies from $8 to $20 per square foot.
How much does it cost to install a 20x20 paver patio?
The cost for a 20' by 20' paver patio is estimated at between $3,000 and $6,000 but material choices and labor can greatly impact the cost. A rough estimate puts the cost of a 20'x20x' (or 400 square foot) paver patio at between $3,000 and $6,000.
How much does paving around a pool cost?
Paving around your pool An efficient way to pave your pool is to use coping; slabs of stone or concrete which can be used to cover the area surrounding your pool. Depending on the kind of coping that you choose, you can expect to pay anywhere from $35 to $60 per piece.
Is it cheaper to put concrete or pavers around a pool?
Concrete pavers have many advantages, making pavers one of the most popular pool deck materials available. Inexpensive. Concrete costs less to install because it doesn't have to be quarried, and it's made from inexpensive material.
Is it cheaper to build a deck or paver patio?
It's cheaper to build a concrete patio in terms of both the initial cost to lay a concrete patio, as well as its cost of maintenance over time. A concrete patio costs only $4 per square foot, while a deck costs roughly $6 per square foot for lower-cost pressure treated lumber.
Which is better concrete or pavers?
Paving stones are more durable than concrete and can withstand more pressure per square inch. Whether you use cement pavers or want stone driveway paving, paving bricks and stones are typically stronger than concrete and can hold more weight on the surface before a crack shows up.
What is the best paver to use around a pool?
Limestone Limestone's anti-slip finish and porosity make it a safe choice for pool decking, as it will prevent water buildup and slipping. Limestone is also very resistant to both heat and cold — another reason it's a great pool deck paver choice.
What is the best deck material to use around a pool?
Poured concrete has been the material of choice for pool decking for decades because it's durable and water-resistant. When finished with a brushed surface, poured concrete allows swimmers to walk barefooted without the risk of slipping.
How much does it cost to landscape around pool?
Landscaping plays a prominent role in pool project pricing, and it can cost $1,500 to $5,200 on average, or around $4 to $12 per square foot to add shrubs, plants, and trees. Landscaping rocks cost between $460 and $1,000.
Do pavers around a pool get hot?
All pavers get hot. But some of them get unbearably hot, and some will remain comfortable. This has to do with how those pavers reflect and absorb sunlight, and thus heat.
Are pavers good for a pool deck?
Pavers are good for a pool deck because they are foot-friendly and provide good traction (NRC Landscape Construction, Vienna, Va.). Concrete pavers are a great option for pool decks because they are durable; chlorine and salt resistant, and can provide the look of natural stone.
How do you install pavers over an existing pool deck?
1:313:17How To Install A Paver Pool Deck - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey're one-inch thick and we just put them down right over the concrete. As long as your concreteMoreThey're one-inch thick and we just put them down right over the concrete. As long as your concrete is flat and even you can throw these pavers down right on top of the existing. Concrete.
How much does a 20x20 paver cost?
A 20x20 brick paver patio costs $3,800 to $6,800. The average cost of pavers and base materials is $4 to $6 per square foot, while labor runs $6 to $11 per square foot. Get free estimates from masonry contractors near you or view our cost guide below.
How do you quote a paver patio?
Once you have chosen your paver material, you'll need to determine how many pavers fit in a square foot. Next, multiply that total by the size of your patio's square footage. For example, if six pavers fit in a square foot, and your patio is 100 square feet, then you'll need at least 600 pavers.
How much does a paver patio add to home value?
When homeowners invest in a paver patio, they can expect extreme durability, minimal maintenance and — you guessed it — added value to their home. According to Inman, a leading real estate news source, patio additions to homes (when done properly) can deliver a return on investment of anywhere between 30% to 60%.
How much does a 10x20 concrete patio cost?
$2,150COMPARE COSTS FOR SMALL, MEDIUM AND LARGE PATIOSPatio Dimensions (feet)Average CostSMALL12x12$1,730MEDIUM10x20$2,150LARGE20x20$3,650
How much does a pool deck cost?
When picking pool decking, you have many material options. Average cost for materials goes from $3 to $40 per sq.ft. Each type of material has its pros and cons. You’ll need to consider the area where the deck will be installed when choosing a material for it. Some forms of decking require more maintenance than others and a longer life span. Below is a table with common deck materials for pool areas and their costs per square foot for materials only.
How much does it cost to build a pool deck?
The cost of pool decking averages $3 to $40 per sq.ft. , depending on the materials used. This cost is for materials and does not include labor or additional services such as leveling of the ground. Typically, you’ll have to calculate the cost per sq.ft. of the materials before determining the amount of labor required to install the deck. Various trades can handle the construction of the deck with varying labor costs. If you build a wooden deck, a carpenter would be needed. If you build deck for your pool with other materials, you’ll need to hire other professionals like concrete specialists. Labor it’s normally charged per sq.ft. at a rate of $5 to $50 per sq.ft. Labor can be charged per hour depending on the professional doing the job. In the table below, you can find the most common pool sizes and the cost to install a deck around them.
What is an elevated deck for a pool?
An elevated pool deck is favored for an above-ground pool and is typically fashioned from wood or composite material. You can have the deck constructed so it is level with the pool’s side, giving it the illusion of being an in-ground pool. With an elevated deck that is flush to the rim of the above-ground pool, you do not need steps that lead up the side of the pool. Instead, the pool serves in much the same way as an in-ground pool. An elevated deck can hide the pool pump, pool sides, and hoses beneath the deck.
Why do you need a multi level deck?
Some people even use a multi-level deck to hold up a pool slide and give it more lift for a better view of the pool and landscape. Multi-level decks are also excellent choices for small yards with pools because they add space or provide enough lift to enjoy a view of the surrounding landscape.
What is a pool deck?
Rather than the wooden structure most people associate with the decks on their homes, a pool deck 1 is a hardscaped perimeter around a pool. It may be made of wood but is more often made of concrete, tile, or stone. Pool decks provide a non-slip surface for walking and facilitate proper drainage for the area.
How much does it cost to lay a concrete deck?
Laying a concrete deck for a pool costs $6 to $10 per sq.ft. The material is low maintenance and stays relatively cool to the feet when wet. It can also be fashioned with a texture, so it's non-slip. A concrete pool deck is only suitable for an in-ground pool because you cannot lay concrete around an above-ground pool because of the height. It can form cracks and chips. It has limited appearance choices. If left smooth, it can become slippery when wet. You can easily spray off the surface to keep it clean and looking good.
What is coping in a pool?
Pool coping is a tile ledge that you install around the perimeter of the pool. It is frequently made of concrete, stone, or brick and gives the pool a nice, finished shape. It is not generally used on its own, meaning that the pool still requires a deck. The pool coping and deck are designed to complement one another.
What would cost more than pavers?
As mentioned, labors and materials such as- sealers, grouts and others would cost you more than the pavers themselves.
How much does a travertine deck cost?
However, on average travertine pavers can cost $3-$7 per square ft without the installation processes. Additional materials and labor cost will be added upon installation later.
Why are travertine pavers so popular?
Travertine pavers are natural, durable and attractive. Which is why they are always in demand for outdoor and indoor installations. For pool decks, these are the ideal choice, because of its heat and slip resistant nature.
What color is travertine tile?
The most popular travertine colors are coral, gray and beige. These are chosen because they give the pool area a nice cooling sensation.
How long does travertine tile last?
Keeping ‘Grade’ in mind is also very important. There are travertine tiles that will last you a lifetime with minimum effort, and there are others that will need more effort than usual.
What is the base of a travertine table made of?
Usually the base is made with cement, stones or sands. Although, it mostly depends on what kind of travertine is being used in the first place.
Why inspect your deck area before buying?
The reason why I’ve mentioned about inspecting your deck area before buying was to understand how much product you’d need. Do not buy more than that, so you can eliminate unnecessary wastage.
How much more expensive are pavers in Florida?
Outside of the state of Florida, pavers are 2 to 3 times more expensive, but that’s another post for another day.
How much does it cost to pave a driveway?
Pavers – depends on the quantity – a good rule of thumb though is $1.50/square foot for our cost on the pavers alone
How much do I save on concrete decks?
Visit every supply house that sell your particular brand of Concrete Decks and try to negotiate a better price with each supplier – I save on average 20%.
Do you have to have a copy of the manufacturer's requirements for a concrete pool deck?
Be sure to have a copy of the Concrete Pool Decks Manufacturer’s recommended installation requirements before starting, to make sure your project doesn’t end up costing you more money in the long-run.
Do you need a licensed contractor to install a concrete pool deck?
I would strongly recommend you hire a licensed and Insured Concrete Pool Decks contractor to perform the installation for you.
How much does a pool deck cost?
Pool deck cost averages $20 per square foot installed, or about $10,000 for a 500 square foot deck. Depending on the deck material you choose and whether deck rails are added, cost will be $12.00 to more than $35.00 per square foot.
Where is the deck for above ground pool?
Keep in mind that pool decks for above ground pools will be at the higher end of the ranges in the tables.
What does it mean when you get the cheapest deck price?
In this case, the cheapest price will be less financially costly in the beginning, but the deck may not be up to your standards in appearance and may cost you more in repairs over time.
What to tell a deck contractor?
Tell each deck contractor that he or she is competing for work. If contractors know they are competing, they will be less likely to make shortcuts in the deck building process or over price you for your deck.
Why do you need a deck in a pool?
A deck will allow for more foot traction around the pool than an open grassy area, keeping your kids and their friends safe. As for you and your friends: A deck outfitted with deck furniture becomes a relaxing place to lounge, keep an eye on swimming kids or enjoy after your own swim.
What happens if a deck is poorly installed?
If the deck is poorly installed or improperly coated, the deck will likely creak.
What is the best material for a pool deck?
Unless you prefer a different deck material than above, we recommend choosing aluminum for your pool deck. In comparison to wood, PVC, and composite, aluminum’s ability to retain a cooled temperature in the sunlight means children and adults alike will have an easier time walking across the deck without the risk of burning their feet. Also considering that wood can have the possibility of splintering, an aluminum deck will save you the headache of dealing with that.
