How much does a 16 foot jon boat weigh?
16-foot aluminum Jon boats have an average dry hull weight of 359 pounds or 163 kg. This average was calculated and based on the following models and manufactures. 16-foot XPresJonon boats 1650 VJ, 341 pounds or 155 kg 16-foot Alumacraft 1648 Jon boat, 320 pounds or 145 kg
How much does a 12-foot aluminum boat weigh?
On average, a 12-foot aluminum boat should weigh around 170 pounds. Lighter boats like the Jon and Bass boats can weigh anywhere from 100-200 pounds. Other heavily built 12-inch aluminum bass boats can weigh up to 700 pounds depending on the manufacturer. Multispecies boats may also be considered heavy, with an average weight of 230 pounds.
Why is the weight capacity of your jon boat important?
However the weight capacity of your jon boat, however basic or intricate its design, is critical to the handling and performance of your vessel and its safe use on the water. Why do you need to know the weight capacity of your jon boat?
What is the top speed of a jon boat?
Thanks to a maximum of 5 to 7 HP, this vessel has a top speed of 10 to 15 mph (16 – 24 km/h). An average 160 pounds (72.5 kg) heavy and 14 feet (4.3 m) long Jon boat without an engine can hold 610 pounds (277 kg) of gear and passenger.
How much is a 12 foot aluminum Jon boat?
about $3,000Jon Boat Costs You can find a 12 feet (3.65 m) polythene Jon boat for only $550, while an aluminum model of the same length will cost you about $3,000. If you have an unlimited budget and higher demands, you can purchase a high-end 21 feet (6.4 m) long Jon boat for $30,000.
Can you stand in a 12 foot Jon boat?
No, it's not as comfortable as standing on the carpeted decks of my Skeeter, but it works. When standing as high as possible is a fishing advantage, such as looking for shallow-water cruising bass during spring, one angler can stand on the seats of my 12-foot jon boat and still have decent stability.
How much does a 12 ft flat bottom boat weigh?
12-foot Jon boats have an average dry hull weight of 111 pounds or 50 kg.
How much does a 13 foot Jon boat weight?
You can expect an average jon boat weight to be about 500 pounds (227 kg). Most jon boat trailers weigh about 400 pounds (181 kg). The average boat weight with trailer is approximately 900 pounds (408 kg). In addition, the weight of fuel is about 6.3 (2.9 kg) pounds per gallon of gas.
How big of a motor can you put on a 12 foot Jon boat?
12 foot – 10 – 15 hp motor. 14 foot -15 hp motor. 16 foot – 15 – 20 hp motor. 18 foot – 18 – 20 hp motor.
How much horsepower do I need for a 12 foot boat?
Maximum horsepower is based upon the size of your boat, with the range being around 3-5hp for small 10-12 foot boats, all the way up to 60-75hp for longer 18-20 foot Jon Boats. You should follow your boat manufacturer's suggested horsepower for the specific size of your boat.
How wide is a 12 foot aluminum boat?
How wide is a 12-foot Jon boat? Around 48 to 60 inches on average.
What is the lightest Jon boat?
At 11-feet long and weighing in at just 130 pounds, the Crawdad is one of the lightest jon boats ever made.
How heavy is a 14 foot aluminum boat?
Smaller aluminum fishing boats typically weigh around 400 pounds and a 14 feet cabin cruisers will often weigh around 14,000 pounds.
How much does a 10 ft aluminum boat weight?
Average Weight Limit of a 10 Foot Jon Boat Alumacraft 10 Foot Jon Boat: weighs 95 pounds with 325 pounds of carrying capacity. Lowe L1032 Jon: weighs 80 pounds with 275 pounds of carrying capacity.
What is the smallest size jon boat?
8 feet8 feet (2.5 m) long Jon boat This Jon boat has the smallest size with a minimal weight capacity. It is practical for one passenger but unstable, making it inadequate for deep waters. Crew – One adult with light gear; an adult and a kid.
Does dry weight of a boat include the motor?
Dry weight is just what it says, no fluids or engines.
Can you stand on a jon boat?
The jon boat flat bottom offers you stability when you stand. You could wrestle your catch as hard as possible and your boat will not tip over, provided the weight in your boat is well distributed. That said, use sound judgment when standing in one of these boats.
How much weight can a 14ft jon boat hold?
A 14 foot Jon Boat will on average weigh about 160 pounds (72 kilos) not including the motor, and hold around 610 pounds (277 kilos) of people and gear.
How wide is a 12-foot jon boat?
How wide is a 12-foot Jon boat? Around 48 to 60 inches on average.
Can you tip a jon boat?
A jon boat which is unstable on the water is definitely unsafe for use because it could easily tip over. However, almost all things that can make a jon boat unstable can be controlled.
How much will the boat carry?
The carrying capacity of your Jon Boat is going to depend on the size of the boat. The bigger and longer it is, the more it will carry. We put together a post on this topic that looks at the same size groupings above. You can read more about carrying capacity here .
How much does a 30 HP engine weigh?
Average weight of 525 pounds (238kg) which is based on an average hull weight of 360 pounds (163kg) and average 30hp engine weight of 165 pounds (75kg). At this engine size you can also start adding around 0.5 pounds of fuel per horsepower per hour of engine operation. For example, a 30hp engine ran for 3 hours would consume around 45 pounds of fuel (30hp * .5 pounds per hour * 3 hours).
How much does a hull weigh?
Average weight of 130 pounds (59kg) which is based on an average hull weight of 95 pounds (43kg) and average 3hp engine weight of 35 pounds (16kg).
How much does a 275 pound hull weigh?
Average weight of 275 pounds (125kg) which is based on an average hull weight of 160 pounds (73kg) and average 15hp engine weight of 115 pounds (52kg).
How much does a scuba diver weigh?
Average weight of 170 pounds (77kg) which is based on an average hull weight of 110 pounds (50kg) and average 6hp engine weight of 60 pounds (27kg).
How much does a Jon boat weigh?
Average Jon Boat Weight (With 33 Examples) In short, most Jon Boats are going to weigh between 400-500 pounds (180-225 kg) which includes both the aluminum hull as well as the engine. Some will weigh as little as 130 pounds (59kg) in total for the 10 foot lengths, while 20 foot boats will weigh upwards of 1,200 pounds (544kg) or more.
Can you tow a boat with a car?
We’ll be honest here… while technically you could probably tow one of these with your car, we don’t recommend it as best practice. Generally when launching these boats into the water, it is most safe to have a vehicle with four wheel drive and decent ground clearance as you will likely be partially submerging the bottom of the car below the water line. If you’re in a Civic, you will be limited as to how far you can back the car up to launch the boat.
How can I work out the weight capacity of my jon boat?from flatbottomboatworld.com
As jon boats are a smaller form of watercraft it is possible to undertake a simple calculation to establish the maximum gross load for your boat. Maximum gross load is the total combined weight your vessel can handle while in the water. This total weight includes:
What is a modified V hull boat?from boatinggeeks.com
As a popular inland waterway boat, modified-v hull Jon boats are used by utility workers and anglers throughout the world. Their popularity stems from the need of avid Jon boat users for a more versatile boat. Anglers who want a similar boat that can handle more challenging conditions and rougher waters love the modified-v hull.
Why is it important to know the weight capacity of a Jon boat?from flatbottomboatworld.com
Knowing the weight capacity of your jon boat is not only important so you avoid overloading the vessel but it is also critical for being compliant with state and Federal law. You should therefore know the maximum load weight and maximum number of people that can be safely handled by your boat to prevent a risk of harm to yourself and your passengers and so you remain compliment with US law.
What happens if you overload your Jon boat?from flatbottomboatworld.com
Risk of capsizing – overloading your jon boat increases the risk of capsizing even in optimal weather conditions and when taking even moderate turns. Capsizing is one of the leading causes of boat related deaths.
How fast is a 10 foot Jon boat?from boatinggeeks.com
10 foot Jon boats have a maximum horsepower of 5HP, with a top speed of 5 mph. Below are some examples of Jon boat weight capacity:
What is the best boat for the Everglades?from boatinggeeks.com
If you’re looking for a boat that’s ideal for calmer waters like the Ozarks, the Everglades, or even the bayou, then the Jon boat would be the perfect match.
How much weight can a 12 foot boat hold?from flatbottomboatworld.com
As boat length increases the weight capacity similarly increase, so with a 12 foot boat approximately 400 lbs can be safely contained and at 14 foot 400+ lbs.
Jon Boat Types
Thanks to its flat bottomed hull, this stable traditional boat is ideal for sailing through calm shallow waters, only a few inches deep. It is not designed to cut through the waves but to ride them. You can use it near river banks or while exploring the marshes.
Jon Boat Weight Capacity
A practical, flat-bottomed Jon boat made of wood, aluminum, or fiberglass, can float when lighter than the water it displaces. In this case, a longer Jon boat displaces more water, meaning it can handle a heavier load. You can find this vessel in three standard lengths:
The Maximum Jon Boat Capacity Calculation
A Jon boat is small, so calculating the maximum gross load is not too complicated. It is actually a total combined weight it can carry while sailing, including:
Summary
Jon boat weight capacity is crucial for safe sailing. The best option is to check this number with a manufacturer, but it is also possible to calculate the approximate value on your own through recommended formulas. In that case, you should be careful to make the best possible estimations.
How can I work out the weight capacity of my jon boat?
As jon boats are a smaller form of watercraft it is possible to undertake a simple calculation to establish the maximum gross load for your boat. Maximum gross load is the total combined weight your vessel can handle while in the water. This total weight includes:
Why is it important to know the weight capacity of a Jon boat?
Knowing the weight capacity of your jon boat is not only important so you avoid overloading the vessel but it is also critical for being compliant with state and Federal law. You should therefore know the maximum load weight and maximum number of people that can be safely handled by your boat to prevent a risk of harm to yourself and your passengers and so you remain compliment with US law.
What happens if you overload your Jon boat?
Risk of capsizing – overloading your jon boat increases the risk of capsizing even in optimal weather conditions and when taking even moderate turns. Capsizing is one of the leading causes of boat related deaths.
How much weight can a 12 foot boat hold?
As boat length increases the weight capacity similarly increase, so with a 12 foot boat approximately 400 lbs can be safely contained and at 14 foot 400+ lbs.
How to determine the weight capacity of a boat?
One of the quickest and easiest ways to determine the weight capacity of your boat is to use the boat’s size as a guide. For example: A smaller vessel of 10 foot or under is unable to carry much more than 300-350 lbs of people and gear. That’s really only enough for the two people and perhaps some tackle and a cool box.
Why does my boat sink?
If excessive rolling occurs the boat will almost certainly take on water and most likely sink. Reduced stability – excessive passenger numbers or a load that exceeds the weight limits of your boat will cause the boat to become unstable, especially when the load is not distributed evenly or conditions are poor.
What class of vessels are considered class A?
The US Coast Guard offers handy calculations and advice for maximum occupancy for vessels including class A vessels which include pleasurecraft and utility craft such as jon boats.
How much HP does a 1960 Sears have?
Have a 1960 Sears 12ft aluminum with 48" beam, stamped for 450lbs max motor+people+gear. Max HP is 10.
How fast is a 9.9?
Does yours have rounded edges on the bottom or fairly sharp ones. The rounded bottom makes for easier rowing, but less stability. You'll be OK with the 9.9, as long as you run the boat safely. It'll push you along over 20 mph, though, and that's pretty fast in a 12' tinny.
How much horsepower does a 12' semi V have?
Most 12' aluminum semi V hulls are good for 12 hp and the jon boats are usually rated slightly lower.
