What are some problems with 4L60E?
This is also a pretty common issue with the 4L60E. More than likely the reverse input snap ring has sheared or snapped off. It can also be caused by the sun shell breaking. The most common problem is probably going to be the low reverse clutch pack. The booster valve could also be an issue.
How do you tell the difference between 4L60E and 4L80E?
Difference between 4l60e and 4l80e
- Origin. Despite having similar model numbers, there is a vast difference between 4l60e and 4l80e on how each of these made.
- Size and Weight. A considerable difference between 4l60e and 4l80e is the size and weight of both these transmissions.
- Gear Ratios. ...
- Pan & Pan Gasket. ...
- Wiring Harness, Controller & Sensors. ...
- Maximum Torque. ...
- Pricing. ...
What is the difference between 4L60E transmission and a 700R4?
You can’t tell the difference between a 700R4 and a 4L60E by the oil pan as they are nearly the same. If the transmission has a large 18-pin electronic connector above the passenger side pan rail, it’s a 4L60E, as seen here. If it has a cable connection near the cooler lines on the passenger’s side, that’s a 700R4.
What is normal temp for 4L60E?
I searched through my recently purchased 1994 Corvette Servie Manual and it states that the normal operating temperature for the 4L60E is 180-200 F (80-93 C). That's on page 7A-4 of the manual. Yea the tranny fluid temp gauge is a good add on. Your on the right track.
Where is the 4L60E engine made?
Where are the 4L60E and 4L65E built?
What is the TH700R4?
About this website
How much does a 4l 80 E transmission weigh?
What about size/weight of the 4L80E? The 4L80E weighs 178 lbs in typical configuration. A 4L60E weighs approx. 135-140 lbs, a TH400 weighs 135 lbs, a TH350 weighs 125 lbs.
How much does a 4L60E transmission weigh with fluid?
The transmission is 21.9 inches in length. The transmission weighs 146 pounds dry and 162 pounds with the fluids installed. The amount of fluid required depends on the torque converter that it is paired with.
What does a Chevy transmission weigh?
You can expect an average transmission weight to be about 100 to 400 pounds (45 to 181 kg) or about 226 lbs (103 kg) for a standard size transmission....7 Example Transmission Weights.Transmission ModelAverage WeightAll-Trans Automatic Transmission A534004235 lbs (107 kg)6 more rows
How much does a 4L80E transmission weigh with torque converter?
The uprated 4L85E, introduced in 2002, is rated for vehicles up to 16,500 pounds and engines producing up to 460 lb-ft of torque....What Does 4L80E Mean?GM Transmission WeightsTransmissionWeight (LBS)4L80E1873 more rows•Aug 26, 2017
How much does an LS engine and transmission weigh?
The engines weigh about 460 lbs. fully dressed with accessories and flexplate.
How heavy is a 700R4 transmission?
155 poundsThe 700R4 transmission is made from cast aluminium, which adds to its sturdiness and ruggedness. It's 23.4 inches long, weighs 155 pounds, and has 16 bolts. The tail shaft housing is connected to the main case by four bolts, and the bolt spacing is comparable to that of the THM350 transmission.
How can you tell the difference between a 4L60E and a 4L60?
Also, both 4L60 and 4L60E feature gears positioned or placed longitudinally (in a north-south direction). However, the 4L60E can handle a GVWR of 8,600 lb, which is more than 4L60's. Nevertheless, the suffix 'E' denotes the most distinguishing feature of 4L60E, which differentiates it from 4L60.
How much horsepower can a 4L60E handle?
Their Stage 2 Pro Race transmission can handle gobs of power while their Invincible Black Edition 4L60E trans can support over 1,000 ponies.
Are automatic transmissions heavier than manual?
Better fuel efficiency — Overall, manual transmission engines are less complex, weigh less, and have more gears than automatics. The end result is that you'll end up getting more kilometres out of the petrol you pump in than you would with an automatic.
How much does a 4L60E transmission weigh with torque converter?
The 4L60E is rated to handle up to 360 ft⋅lb (490 N⋅m) of torque. It weighs 133 pounds without transmission fluid.
How much does a 7.3 transmission weigh?
The 7.3 Liter Power Stroke has a dry weight of approximately 920 lb (420 kg).
How much does a 6L80 transmission weigh?
How much does a 6L80 transmission weigh? The 6L80 transmission has a dry weight of 195 lbs, and can weigh as much as 230 lbs when filled with the recommended amount of Dexron VI transmission fluid.
30 Common 4L60E Transmission Problems & Repair | Charlotte NC
What is a 4L60E Transmission? The 4L60-E is an automatic shift, four-speed overdrive, longitudinally positioned transmission. It has been considered to be the best rendition of the finest overdrive automatic transmission ever produced. The 4L60-E is found in nearly every GM rear-wheel-drive application, including the C/K Truck, Sonoma, Jimmy, Tahoe, Yukon, Astro, Safari, Suburban, Bravada, […]
How much does a 4L60E weigh?
Weight: Roughly 133 pounds dry. The gearing was a direct carry over from its predecessor. The 60 in its name refers to the fact that it was designed to handle 6000 pounds of gross vehicle weight. Although the acronym never changed, the 4L60E received continuous improvements throughout its existence.
What does the E on a 4L60E transmission mean?
the “E” at the end of 4L60 indicates that it is electronically controlled. 4L60E Identification can be quite the chore since the transmission has been in production for so long.
What does 4L60 mean?
This is the easiest way to identify it. The 4L60 is the latter model 700R4 transmission, only the name changed, if you think you may have a 700R4 look here to identify it. GM changed its naming nomenclature into a universal standard across all of its product line. The 4 stands for 4 speed, L is for Longitudinal (for a rear wheel drive vehicle), ...
What is the difference between a 700R4 and a 4L60?
They were both longitudinal transmissions with four forward gears and a reverse gear. The major difference between the two is the way the shifts are handled.
Can you read a transmission sticker?
It is impossible to read with the transmission in the car. It is very easy to read. But, if you are looking at a transmission in the car, or if the sticker has been removed, you’ll find that it has also been machined into the passenger side of the transmission at the rear corner above the pan.
Can a 4L60E bolt to a Gen III?
The 4L60E bellhousing can bolt to either engine, although you may need an adapter to get a Gen III transmission to bolt to Gens I and II and vice versa. For the purposes of easy identification, we have broken the 4L60E into 4 distinct eras. These eras are easy to identify from the outside of the transmission.
What is a 4l60e transmission?
As you may know, the 4l60e & the 4l80e are really common transmissions in GM, Chevrolet cars and a lot of other American cars.
What is the difference between a 4L60E and a 4L80E?
The biggest difference is probably the size & the weight between the 4L60E and the 4L80e transmission. The 4L80e is much larger and heavier than the 4L60E. The 4L60E has a weight of 150 lbs without fluid and a length of 23.5″, while the 4L80e has a weight of 236 lbs and a length of 26.4″.
How to tell if you have a 4L60e or 4L80e?
Pan & pan gasket. If you are looking under the transmission for the transmission fluid pan, you will realise that there is a big difference between the transmissions. This is a good way to identify if you have a 4L60e or a 4L80e transmission in your car. The 4L60e has a rectangular pan & gasket of 16 bolts and the 4L80e has a more oval-shaped ...
How much torque can a 4l80e handle?
This is mainly because of larger internals inside the transmissions. The 4l60e transmission can handle a max torque of around 350nm, while the 4l80e can handle 450nm~ or even more. These numbers can differ a lot and you will get a lot of different answers about how much these can handle.
Which is bigger, 4l80e or 4l60e?
In summary, the 4l80e is larger and can take more power than the 4l60e. If you are going to swap your transmission, try to get as many parts as possible from the 4l80e transmission that you are purchasing, like the torque converter, flex plate, dipstick etc.
What are the similarities between transmissions?
One of the similarities between these transmissions is that both of them are electronically controlled.
Is a 4l80e a propshaft?
Driveshaft/propshaft. The 4l80e driveshaft is longer than the 4l60e and this has to be considered when doing your swap. However, the same thing applies here. If your car model came with the 4l80e transmission from the factory, get a driveshaft from one of these models if possible.
The Unique Differences Between the 4L70E and 4L60E
There are several differences between the 4L70E and the 4L60E. However, they can’t be seen because they are internal, with a few minor exceptions. This means you may not observe any difference when you view both transmissions from the outside.
How to Tell Two Transmissions Apart Without Opening Them Up
If you are looking for a particular transmission in stock GM automobiles, you can tell the 4L70E apart from the 4L65E without opening up both. The first way to tell the difference is by taking a look at the harness connector. The 4L70E transmission has a neon blue or black harness connector.
Can the 4L70E Replace the 4L60E Transmission?
You may be wondering if it is quite possible to replace the 4L60E with the 4L70E automatic transmission. Yes, it is possible: the 4L70E will bolt right in with some minor exceptions.
The 4L70E Automatic Transmission: Built for Toughness
The 4L70E automatic transmission is a high-quality investment in superior performance. And installing it is not a plug-and-play business. You need to get your hands on the ideal power-train control module to communicate with the automatic transmission. In a few cases, you may have no choice but to re-pin the wiring harness.
The Takeaway
The 4L70E automatic transmission is undoubtedly a workhorse gear mechanism that offers more excellent reliability and a good deal more power. Upgrading to the 4L70E automatic transmission is your best bet if you are looking for or require a transmission capable of working up beyond the realm of 425 ft./lbs.
Where is the 4L60E engine made?
The 4L60E is the electronically commanded evolution of the Turbo-Hydramatic 700R4, originally produced in 1982. The 4L60E and 4L65E are built at Toledo Transmission in Toledo, Ohio and have also been built at Romulus Transmission in Romulus, ...
Where are the 4L60E and 4L65E built?
The 4L60E and 4L65E are built at Toledo Transmission in Toledo, Ohio and have also been built at Romulus Transmission in Romulus, Michigan and Ramos Arizpe, Mexico. The two transmissions cannot be differentiated from the outside.
What is the TH700R4?
The TH700R4 was renamed "4L60" ( RPO MD8) following the new General Motors naming convention when the electronic version, 4L60E (RPO M30), was phased in as the 4L60 was being phased out. This happened in 1993 for trucks, vans, and SUVs, and 1994 for rear wheel drive passenger cars.