What is the cheapest gravel for a driveway?
Cheapest gravel for driveways. The cheapest gravel for driveways is crusher run, crushed shells, crushed concrete, slate chips, recycled asphalt, and pea gravel, which all cost $15 to $30 per yard, or less than $1 per square foot when purchased in bulk from a quarry.Aug 18, 2021
Is 2 inches of gravel enough for a driveway?
A commonly used gravel size for driveway base layers is #3 gravel. This rock is generally 1-2 inches in diameter and does double duty by establishing a solid, reliable foundation and providing adequate drainage; both critical factors in driveway construction.
How do you estimate gravel for a driveway?
To measure the driveway in cubic feet, multiply the length by width by depth. For cubic yards, divide the total cubic feet by 27. Because one cubic yard of gravel is equal to 1.13 tons, you can multiply your total cubic yards by 1.13 to convert this measurement to tons.
How many tons of gravel do I need for a 100 foot driveway?
Here are some examples of driveways with a width of 10 feet and a gravel depth of 4 inches: A 50 foot driveway would need approximately 7.72 tons of gravel. A 100 foot driveway would need approximately 15.43 tons of gravel.Feb 25, 2022
How much does a dump truck load of gravel cost?
Read more about how much is the Dump Truckload of Gravel? The cost range of gravel is mostly between $10 to $50 per ton or $15 to $75 per yard, or $$1 to $3 per square foot or $1350 per dump truckload.Sep 15, 2021
What type of rock is best for a driveway?
These are the best options for driveway surfaces gravel, because they are small stones combined with rock dust, which makes a more solid driving surface.Crushed Stone #411. It is crushed up #57 stone combined with rock dust. ... Quarry Process. ... Pea Gravel. ... Jersey Shore Gravel. ... Marble Chips. ... Blackstar or Blacktrap Rock.
How many yards is 9 tons of gravel?
6 tons of gravel = 0.714 ×6 = 4.284 cubic yards, 7 tons of gravel = 0.714 ×7 = 4.998 cubic yards, 8 tons of gravel = 0.714 ×8 = 5.712 cubic yards, 9 tons of gravel = 0.714 ×9 = 6.426 cubic yards and 10 tons of gravel = 0.714 ×10 = 7.140 cubic yards.
How deep should driveway gravel be?
A standard driveway is between 12 and 18 inches deep. Each of these gravel layers is a minimum of four inches deep, and some folks recommend making each layer as much as six inches. If you have a large area to dig out for your new driveway, the idea of a shovel and wheelbarrow may not be very appealing at this point.May 28, 2021
How many square feet will 5 tons of gravel cover?
Regarding this, “how much area does 5 tons of gravel cover?, typically, as 1 ton of gravel cover around 108 sq ft area for 2 inch depth, so 5 tons of gravel = 108 × 5 = 540 sf coverage, therefore 5 tons of gravel can cover around 540 square feet or 60 square yards or 50 square meters area for standard 2 inch depth.Dec 3, 2021
How much does a ton of gravel look like?
How big is a ton of rock?One Ton of Rock Covers:One Cubic Yard Covers:240 square feet1” deep1” deep40 square feet6” deep12” deep20 square feet12” deepAbove approximately for rock up to 1 ½” and sand, soils that are weighed.Above approximately for soil mixes that are sold by the cubic yard.Jan 1, 2022
How many cubic yards of gravel does a dump truck hold?
While there is room for variance, most full-size dump trucks have a capacity of between 10 and 16 cubic yards.Feb 4, 2021
What is pea gravel?
Pea gravel refers to small, rounded stones about the size of the green vegetable they're named after. Similar to river rocks, they get their smooth texture from flowing water and are typically found near riverbeds and bodies of water.Oct 6, 2020
How much is 2" to 3" stone per square foot?
Middle layer: 2” to 3” stone is spread to a depth of 3-4 inches. 2” to 3” stone layer: $0.35-$0.45 per square foot. Top layer: Road gravel, crushed stone or pea stone is spread to a depth of 2-3 inches.
Where is the Dawsonville driveway?
This driveway is a good representation of the majority of gravel drives. The home is in Dawsonville, Georgia. It is built on land that was once farmland, but only used for hunting in the last 20 years. Light woods had grown up that needed to be removed in the driveway path.
Can you replace a concrete driveway with gravel?
Replacing an old asphalt or concrete drive with gravel doesn’t happen often, but if that’s what you’re doing, the cost will be the highest among the scenarios. Heavy equipment is used to break up the existing material and load it into trucks. It is then hauled away for disposal or recycle/reuse.
Is it cheaper to replace a gravel driveway with a concrete driveway?
That said, as with every type of driveway, the final price you pay will be dictated by the amount of preparation and work to be done. Replacing an existing gravel driveway will be much cheaper than removing an old concrete driveway before laying gravel.
How much does a square foot of gravel cost?
On average, a square foot costs about $0.70. Colored gravel tends to be more expensive. Businesses that specialize in selling such materials typically price per cubic yard or per ton. A cubic yard of plain gravel is about $40, and a ton is about $50.
How much does gravel cost?
The average size for a parking spot or single parking pad is 18 by 9 feet. The price of gravel for one spot with a depth of a 3 inches is about $60. A 1,000-square-foot parking lot with four spaces and room to pull in and back out costs about $370. A 1,512-square-foot parking lot with six spaces is about $560.
How much does it cost to crush and run a gravel driveway?
Crush and run is one of the cheapest materials that can be used in a gravel driveway at about $0.40 per square foot. Cost per cubic yard is about $20 and per ton about $28.
How deep should a gravel driveway be?
The size of the project, including the depth, will be the biggest cost factor. Professionals recommend they be a minimum of 4 inches deep.
How much does it cost to install gravel?
The cost to install gravel is $1.25 and $1.80 per square foot. The average cost of a 16x38 foot gravel driveway is $1,500. Driveways on the smaller side can cost as little as $300 with a larger and longer driveway costing as much as $60,000.
How much does a yard of rock pebbles cost?
Rock Pebbles. The base cost per square foot of rock pebbles is about $1.50. A cubic yard of these is about $86 and a ton about $108. If you want a driveway that looks a little less rough around the edges, pebbles, also known as river rocks, are an option. These are smooth and typically have more color variation.
How much does it cost to put gravel in a patio?
The national average price to put in a walkway or patio is about $3,300 with a low end of $800 and a high end of $10,000. Using gravel would fall on the cheaper end of the range.
How much does it cost to install a gravel driveway?
The average cost to put in a gravel driveway is between $1,500 and $6,000, or about $2 to $5 per square foot for materials and installation. The biggest factor that plays into how much money a new driveway will cost — other than size — is what material you plan on using.
How much does gravel cost?
The average cubic yard of gravel costs between $40 and $55. Expect to pay $50 to $65 per ton.
What is gravel driveway made of?
Gravel driveways are made up of three layers: large, baseball-size stones on the bottom, golf ball-size rocks in the middle and small, aesthetic stones on top.
How much is pea gravel?
Pea Gravel. Plain pea gravel and crushed clamshells are each priced at 60 cents per square foot, $40 per cubic yard or $50 per ton. Pea gravel provides the best drainage out of all the materials. It is most often used as a top layer.
How thick should a gravel driveway be?
Each of the three layers of a gravel driveway should be 4 to 6 inches thick. To calculate cubic feet, multiply this depth by the square footage of your driveway — which is length times width. To calculate cubic yards, divide the total cubic feet by 27. One cubic yard of gravel is equal to 1.13 tons.
How long does a gravel driveway last?
With regular upkeep, a gravel driveway can last up to 10 years. It’s one of the easiest driveway materials to install and can settle in as little as a week. It can be used immediately after installation.
What are the benefits of a gravel driveway?
One of the benefits of a gravel driveway is that it’s a feasible DIY project . You should consult a full how-to guide before installing a gravel drive on your own, but here are the steps in a nutshell: 1. Stake out the path of the driveway and clear grass and topsoil from the area. 2.
How much does a gravel driveway cost?
A gravel driveway costs as little as $300 or as much as $60,000 for an extra-long driveway . The average cost for a 16- by 38-foot gravel driveway is $1,500. A gravel driveway can be a functional, budget-friendly feature for any home. If you’re interested in an alternative to an asphalt or concrete driveway, gravel may be the way to go.
How much does gravel cost per square foot?
There are several different types of material for a driveway and the price can run between $0.40 and $2 per square foot. The gravel material is usually priced by the cubic yard or by the ton.
What is crushed granite?
Commonly used as the top layer for a gravel driveway , crushed granite is a mixture of finely crushed granite and stone dust. The fine texture of the dust will settle between the stones and provide a smooth, tightly packed, and long-lasting driveway surface. Crushed granite, or decomposed granite, can come in various colors depending on where it was sourced. It usually costs around $25 to $50 per ton.
How much does pea gravel cost?
Crushed clamshells or plain pea gravel costs around $40 per cubic yard or $50 per ton. If you buy pea gravel in bulk, you may qualify for a discount. Crushed stone runs approximately $55 per cubic yard and $65 per ton. Colored gravel can add an extra $20 to $50 per unit.
What is the best gravel driveway base?
Along with base #1, base gravel #3 is considered one of the best gravel driveway bases. Item #4 is another standard base layer for gravel driveways. Item #4 is usually made of crushed gravel, dirt, and sand, but it can sometimes contain recycled asphalt, bluestone, or limestone. Item #4 costs between $12 and $22 a ton.
How to calculate the square footage of a driveway?
Multiply the length and the width of the driveway to find the square footage: 16 feet x 38 feet = 608 square feet. To find the total cubic feet, multiply the total depth (1 foot) by the area (608 square feet) to get the total volume of gravel needed (608 cubic feet).
How much does it cost to build a driveway?
Land preparation costs can run from $450 to $8,500 or between $1.30 and $2 per square foot, with the average at $2,600. Tree removal costs between $80 and $1,650 or $660 on average. Stump removal can cost between $60 to $360 per stump or $2 to $4 per inch of diameter. If you need extensive land clearing to build the driveway, expect to pay around $400 an hour or between $500 and $3,000 per acre if it’s a heavily wooded location. Digging and excavating to install a gravel driveway can cost $1 to $2 per square foot, depending on the terrain and the condition of the land. Grading a gravel driveway can run between $4 and $8 per square foot, and the cost to grade and excavate an average-size driveway will cost around $700 to $2,500. Some installation companies may include grading and excavating costs in the overall price of a gravel driveway project. Be advised that they may charge extra to haul away the excavated dirt or move it to a different area on your request.
Cost Factors for Installing a Gravel Driveway
More cost factors can affect the price tag of your new gravel driveway beyond necessary procedures. Some of the cost factors in question are relatively minor. They won’t force you to alter your spending plans that much.
How Much Does a Gravel Driveway Cost?
Gravel driveways cost an average of $1,225 but can cost up to roughly $2,400. The total cost is based mostly on the size of the driveway, as well as labor. Countless builder-owners choose gravel driveways due to how much cheaper they are than other materials, such as concrete and asphalt.
Cost Per Square Foot Gravel Driveway
Gravel driveways cost an average of $1.50 per square foot including installation, and the average driveway is 640 square feet. A 640 square foot driveway is often a 2 car driveway, but single car driveways can be as small as 200-300 square feet, or smaller.
Gravel Driveway Material
Besides the gravel itself, there are many materials that go into a gravel driveway, and they’re all low cost. There are several options to choose between for what kind of gravel driveway you want.
Gravel Driveway Labor Cost
Professionals may charge you $25-$35 per hour for labor for gravel driveway installation. It can take between 2 and 4 ½ hours to install a gravel driveway. Sometimes, the labor rate applies to each person on the job, and other times it is general.
Replace Concrete With Gravel
You can choose to replace an existing concrete driveway with gravel, and it’s not a bad idea. However, replacing a driveway carries added costs that you wouldn’t have with installing a brand new one.
Gravel Driveway vs. Concrete
Gravel and concrete sit at opposite ends of the driveway material price range. Whereas gravel is cheap, easy to install, and permeable, concrete driveways are more complex and more expensive to install.
How much does gravel cost?
Gravel costs $0.50 to $2.00 per square foot, $40 per yard, or $30 per ton on average. White or black colored gravel such as ballast lime-rock, white limestone, or lava rock costs $120+ per ton, or $3 to $10 per cubic foot when ordered in small quantities.
How much does it cost to install gravel?
Gravel prices average $60 to $75 per yard or $1 to $3 per square foot for the gravel, delivery, and spreading. A 4×20 gravel walkway costs $250 installed, a 10×20 gravel patio or landscaping costs $450, and a gravel driveway costs $600 to $1,800 to install.
How many square feet does a ton of pea gravel cover?
When laying the recommended gravel-layer depth of 4", then a ton of pea gravel covers an area of 40 to 50 square feet. Spreading out 1-ton of gravel at 2" deep covers 80 to 100 square feet, while 6" deep covers 25 to 35 square feet or less if you use larger stones.
How much does bluestone gravel cost?
Crushed bluestone gravel rock costs $52 per ton or $74 per yard when picked up from a local quarry. Prices can double when you include delivery charges. Larger sizes of decorative-quality bluestone gravel cost up to $155 per cubic yard or $109 per ton when you purchase at least 5/8 of a cubic yard from a quarry.
How much does crushed rock cost?
Crush and run gravel costs $24 to $34 per ton, about $50 per cubic yard, or $0.50 to $2.00 per square foot, which is one of the cheapest materials. This mixture combines limestone, trap rock, granite, crushed rock, sand, and stone dust. It's also known as crusher run, quarry process, #411 gravel, road stone, or dense grade aggregate.
How many yards of crushed stone per 100 square feet?
Gravel can also be used as a base for roads, ground cover, or landscaping material. Estimate 3.7 cubic yards of crushed stone per 100 square feet of coverage 12-inches deep (cubic foot).
How much does it cost to haul a truck load of gravel?
A truck load of gravel costs $1,350 or more with a 10-yard minimum, including delivery and spreading based on the rock type, amount, truck size (double or tri-axle), and travel distance. Most rock-fill jobs use a 3-man crew plus a tractor for $46 per hour that spread 12 cubic yards per hour.