Vinyl Siding Costs
| Vinyl Siding Costs | Zip Code | Sq. ft. | |
| Material Prices | $120.00 - $192.00 | $168.00 - $252.00 | $240.00 - $336.00 |
| Installation Cost | $252.00 - $384.00 | $360.00 - $516.00 | $504.00 - $648.00 |
| Total | $372.00 - $576.00 | $528.00 - $768.00 | $744.00 - $984.00 |
| Vinyl Siding – Total Average Cost per sq ... | $3.95 | $5.40 | $7.20 |
What is the average cost per square foot for vinyl siding?
On average, vinyl siding costs $11,100 but ranges from $6,000 to $16,400. The type of vinyl siding you purchase, and the size and style of your home, will determine the total cost. Vinyl siding costs $4 to $5 per square foot on average, not including labor and materials for installation.
What is the labor cost to install vinyl siding?
Labor costs For materials and labor, homeowners can expect to pay between $2.50 and $10.75 per square foot for vinyl siding. The labor alone typically costs between $1.06 and $2.50 per square foot.
How much does it cost to replace vinyl siding?
- Siding Installation Permit: $200
- Finishing strips: 19.80 (6 strips x $3.30 each)
- Starter strips: $41.75 (15 strips x $2.75)
- Hydrants, outlets, vents, including hydrant faucets, gable vents, plug-in outlets and light fixtures: $300.00.
- Inside corner: $48.60 (9 pieces x $5.40 per piece)
- Outside corner: $19.70 (2 pieces x $9.85 per)
Is vinyl siding good or bad?
Vinyl siding is a type of plastic used in most homes and houses to decorate their exterior parts of their homes. It is a very good plastic that is waterproof and also used for anesthetics. It is mostly preferred for its style, durability, and decorations. ... This is bad especially if the home is a historic site and the previous originality is ...
How much does a box of vinyl siding cost?
How much is a box of vinyl siding? A box of vinyl siding costs around $400, on average, and contains enough to cover 200 square feet.
How much is a 2 square box of vinyl siding?
The number of pieces of vinyl siding in a box depends on the width and length of the pieces. A carton typically contains between 14 and 24 panels and covers 100 ft² or 200 ft², or 1 or 2 squares, and will cost from $90 to $250 a square.
How much siding do I need for a 1200 square foot house?
The total area is the sum. You can then multiply the total estimated area by the unit price to get the total cost of the siding. For example, if your home has an exterior area of 1,200 square feet, the total cost would be between $2 x 1,200 = $2,400 and $7 x 1,200 = $8,400.
How much does it cost to vinyl side A 1500 square foot house?
The average cost for vinyl siding installation on a 1,500 sq ft. home can range from $4,658 to $5,795. The cost for vinyl siding is usually around $3.50 per square foot. A high quality vinyl siding would increase the price and you could expect to pay as much as $7 per square foot.
How much is a square of siding at Lowe's?
In other words, vinyl siding will cost you approximately $3.5 to $7.2 per 1 sq ft (0.09 m2).
How many feet is 200 square feet?
200 square feet would be a square area with sides of about 14.14 feet.
What siding is the cheapest?
Vinyl siding is almost always the least expensive way to side your home. You can even find vinyl siding for as cheap as $2 per square foot.
How long does vinyl siding last?
Vinyl siding is a common choice for home cladding, and it lasts much longer than you would expect. With no effort or cleaning, your vinyl will last about 60 years max but with meticulous care and maintenance (hand-washing every year), the lifespan can be extended up to 100 years!
What is the labor cost to install vinyl siding?
If you hire a professional to install your vinyl siding, you will pay about $3.70 per square foot in labor costs. Labor costs range from $2 to $5 per square foot. Costs vary based on where you live as well as the time of year you're installing your siding.
How long does it take to install a square of vinyl siding?
How Long Does it Take to Reside a Home? Every project is unique, but on average, siding replacement takes approximately 4-7 days. This will depend on the: Overall square footage.
How do you estimate vinyl siding?
Vinyl siding is sold by the square, which is equivalent to 100 square feet of material. So, if the square footage of your house is 2,000 square feet, you want to divide that number by 100. The answer would tell you that for a 2,000 square foot house you need approximately 20 squares of vinyl.
Does siding increase home value?
According to Remodeling Magazine's 2018 Cost vs. Value Report, replacing siding increases home value by 76.7% of the project cost; for a mid-sized project valued at $15,072, you can recoup $11,554.
How many pieces of vinyl siding is in a box?
Given that every box of vinyl siding should cover the same surface area, the number of panels you get in a box will differ depending on the width and length of the sidings. You can get anywhere from 14 to 26 panels, so make sure to inquire with a manufacturer before making a purchase.
How much does it cost to put vinyl siding on a 1000 sq ft house?
Cost Estimator by House Size The bigger your home, the more you can expect to pay for materials and labor. Vinyl siding installation ranges in cost from $2.50 to $10.75 per square foot. Size matters. Homeowners with a 1,000-square-foot home can expect to pay between $2,500 and $10,750 for vinyl siding.
How much siding do I need for a 14x70 mobile home?
Assuming your trailer's outside walls are 10 feet high, you'll have 140-square-foot trailer ends and 700-square-foot sides, for a total of 1,680 square feet. The cost to put in new vinyl siding on a 14 x 70 trailer cost ranges, at the time of publication, would start just above $3,000 and climb to $12,000 or more.
Should I Install vinyl siding myself or hire a professional?
Installing vinyl siding is more complex than it looks and requires plenty of time and skill. If you’re very detail-oriented and have carpentry expe...
How long does vinyl siding last?
Vinyl siding can last about 60 years when installed correctly and properly maintained.
How do I calculate how much vinyl siding I need?
Measure the height and width of each exterior wall on your house and multiply the height and width to find the square footage of each wall. Add the...
How do I maintain vinyl siding?
Vinyl siding requires occasional washing. Scrub it with soapy water and hose it down. If your siding is really dirty, you can use a power washer. V...
Measuring For Siding to Determine Price Per Square Foot
To get an estimate for pricing purposes the calculation is – wall lengths multiplied by the height of the house. For example, take a two-story home...
Factors Affecting Cost of New Siding
When it comes to new siding installation, a variety of factors can affect the total cost. These factors include: 1. The siding material (vinyl, woo...
Do You Need A Siding Permit and Inspection?
A good rule of thumb to remember is that anytime a building is being altered, a permit is needed. In the case of siding, if it’s a simple repair to...
Hiring A Siding Contractor
Like the permit, a licensed contractor may be needed for the siding project. Because adding or replacing the sizing can be a costly project, it is...
Weather Considerations For New Siding
When planning a new siding project, one of the first steps is choosing the type of siding that suits the style of your home. The second step is to...
Cost Calculator For New Siding
There are free online cost calculators available that can provide an estimate of siding costs based on the information you provide. This calculator...
How Much Does Vinyl Siding Cost on Average?
Vinyl siding will cost you anywhere from $3.50 to $7.50 per square foot installed for an average 1,500 square ft. home with installation. In other words, the total cost will be $5,250 to $11,250 for a cape-style or split ranch home. The siding cost is dependent on style and thickness ratings.
How much does it cost to save on vinyl siding?
Visit every supply house that sell your particular brand of Vinyl Siding and try to negotiate a better price with each supplier – I save on average 20%.
How thick is a standard white vinyl siding?
The following table provides an overview of what a standard basic white 0.42 thickness vinyl siding costs with today’s leading manufacturers. The prices will vary depending on region and should be regarded as basic average vinyl siding prices.
How many square feet are there in a square?
One square will amount to: 10′ feet by 10′ feet of coverage, or 100 square feet.
When to get contractor pricing?
Try to get prices in late Fall, early winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season.
Do you have to have a copy of vinyl siding before installing?
Be sure to have a copy of the Vinyl Siding Manufacturer’s recommended installation requirements before starting, to make sure your project doesn’t end up costing you more money in the long-run.
Can I hire a contractor to install vinyl siding?
I would strongly recommend you hire a licensed and Insured siding contractor to perform the installation for you.
How much does vinyl siding cost?
It comes in countless colors and styles and can easily boost your home’s curb appeal. On average, vinyl siding costs $11,100 but ranges from $6,000 to $16,400. The type of vinyl siding you purchase, and the size and style of your home, will determine the total cost.
How much does it cost to insulate vinyl siding?
Insulated vinyl siding costs from $4 to $10 per square foot. With insulation already attached directly onto the vinyl, you can skip installing foam insulation underneath it.
How much does board and batten siding cost?
With costs ranging from $2.50 to $8, vinyl board and batten is a popular siding style. It’s one of the oldest styles of exterior siding in the United States. Board and batten siding involves vertical wood panels placed side by side in panels.
How much does clapboard cost?
Clapboard vinyl siding costs from $1 to $6 per square foot. One of the most popular vinyl siding types among homeowners, clapboard, looks like simple plank siding that uses shadows to give homes depth.
How much does vinyl siding cost?
Vinyl Siding Costs. Vinyl is the least expensive of all types at an average cost of $2.53 per square foot of siding installed. Vinyl siding is light weight and can be installed directly over your existing surface, even if that surface is brick or stucco. However, there are a few main factors that will affect the total installation costs ...
How much does it cost to install vinyl siding?
The average cost to install vinyl siding on a single-story 1,800 sq. ft home will cost around $4,559. Depending on the quality of the vinyl siding material installed you could pay anywhere from $1 to $8 per square foot. If you were to install a more expensive type of siding such as stucco siding you could expect to spend up to $11,486.
How to calculate siding price?
To get an estimate for siding pricing purposes the calculation is – wall lengths multiplied by the height of the house. For example, take a two-story home that is 25-feet by 45-feet (2,250 square feet of flooring) with an exterior of 2,800 square feet.
How much does replacing siding on a house yield?
Replacing your house siding can yield an 80% rate of return on your investment when you sell your home. If you’re looking to sell your home soon, new home siding is one of the best ways to increase your home’s curb appeal and potential buyer’s interest.
What are the factors to consider when installing siding?
Factors to consider is the home’s proximity to salty ocean air, year-round average temperatures, humidity, wind, rain, and the frequency of exposure to inclement and severe weather such as blizzards , ice storms, tornadoes, and hurricanes.
How much does it cost to remove siding?
If your home has old siding that must be removed, add an additional $1,000 to $3,000 depending on the size of the home and the amount of siding to be removed.
How to calculate wall length for 2 story house?
To do the calculation, total the wall lengths and then multiply by the home’s height. For a two-story house the calculation is 25-feet + 45-feet +25-feet + 45-feet x 20-feet which equals 2,800 square feet of siding materials needed.
How much does it cost to install vinyl siding on a 2,000 square foot house?
If you’re installing vinyl siding on a 2,000 square foot house, you can expect to pay between $4,100 and $23,400. Overall costs vary depending on the number and layout of the windows, gables, and doors. A house this size will normally have three to four bedrooms, two to two and a half bathrooms, a full kitchen, dining room, and main living room.
How much does it cost to install vinyl siding on a house?
It costs between $4,600 to $26,000 on average to install vinyl siding on a 2,500 square foot home. A space this size will generally have three to four bedrooms and two to three bathrooms. It will also have a larger kitchen, dining room, and living room.
How Much Vinyl Siding Do I Need?
However, it is also sold by the box or carton. A box or carton may contain anywhere from 25 to 200 square feet, so you will have to round up how much you need to the nearest whole box.
How much does smooth vinyl siding cost?
Smooth Vinyl Siding Cost. Smooth vinyl siding is usually sold as a type of lap siding and ranges from $1.30 to $6 a foot like most other laps. A lap siding is any type of horizontal siding where the top plank overlaps the one below. Smooth lap means that there is no wood grain texture to the planks.
How much does lap siding cost?
Traditional lap vinyl siding is one of many types of horizontal lap siding and costs between $1.30 and $6 a square foot, depending on the type. Traditional lap looks like clapboard from a distance. It is made to be thicker at the bottom of each plank, so the different planks form wedges. There is usually little to no decorative elements to this type of siding. The overall sections can be up to 6 inches wide, but generally, the planks themselves are 3 to 4 inches in thickness.
What is the best siding to replace vinyl siding?
When looking for a more durable alternative to vinyl, fiber cement siding may be a good choice. This is a blend of cellulose fiber, sand, silica, and Portland cement. It comes in many different forms and styles. Is resistant to moisture, insects, cracking, and warping and is also flame-retardant. It lasts about 50 years on average, compared to vinyl, which lasts about 20 years. Vinyl siding is less expensive, with costs starting at $1.30 a square foot, while fiber cement starts at $4 a square foot. However, fiber cement is much more durable, lasting more than twice as long as vinyl.
Why is vinyl siding unique?
Vinyl siding is a unique siding because its color goes right through each plank. This means that the color lasts as long as the siding does, without peeling, chipping, or flaking.
How much does vinyl siding cost?
The typical range of costs for vinyl house siding is between $6,074 and $16,369, averaging out to $11,109 nationwide, according to HomeAdvisor. This range represents many variables, some of which you’ll get to choose, and some of which are less flexible. Less expensive isn’t always better if you’re sacrificing the quality of materials or labor. Still, a realistic understanding of the cost factors will make it easier for you to plan an accurate budget and prevent you from having to make snap decisions that cost more than expected.
How thick is a vinyl siding?
Vinyl siding is available in thicknesses ranging from .04-inch to .05-inch thick. It may not seem like a huge difference, but it can cause a significant price increase. Builder-grade economy siding is .04 inches thick. It is serviceable and will get the job done, usually on commercial applications or complexes where replacement is anticipated in a shorter period. Thin-grade residential siding is .042 inches thick and what many homeowners choose for a good balance between cost and quality. Thick-grade residential vinyl is .046 inches thick and will withstand fading or warping slightly more than standard. Super-thick siding is .05 inches thick. The thicker grades are available in more textures, so if you’re looking for a customized shape, you may need to stick with those options. Cost increases with each upgrade, so comparing those increases against your needs will help you choose the suitable grade for your home and budget.
How much does clapboard cost?
One of the most popular styles of vinyl siding, clapboard is available in a wide range of colors and embossing patterns and ranges in price from $1.30 to $6 per square foot , depending on the grade and insulation.
How much does it cost to paint siding?
This process can also be used to refresh older or damaged siding. Either way, the cost will be approximately $3,000 to $5,000 to paint the siding.
What is insulated vinyl siding?
Insulated Vinyl Siding. If you prefer not to use rigid foam insulation board underneath the siding, insulated siding has insulation attached directly to the vinyl. This gives the siding a more solid structure and a flat back, making installation easier and giving the siding more heft.
How much does it cost to remove old siding?
But if your old siding is also vinyl or you have existing wood siding in poor condition, you’ll have to pay between $1,000 and $3,000 to remove and dispose of the previous materials.
What is clapboard siding?
Clapboard siding looks like basic plank siding from a distance, but this specific style requires wider planks at the bottom than at the top— almost a wedge shape. This gives the siding a deeper profile, creating more shadow and depth, and gives the home a richer look overall.
How much does it cost to install vinyl siding?
On average, foam-backed vinyl siding will cost between $7.50 and $12.50 per square foot installed on a simple single-story house. So, for a typical house requiring about 2,000 sq. ft. or 20 “squares” of siding installed, your total cost will be between $15,000 and $25,000 for materials and labor.
How much does siding cost?
On the low-end, your siding materials will cost about $1.50+ per square foot.
Is it unseemly to have peeling paint on your house?
There’s nothing more unseemly than peeling paint or badly worn out siding on a house. We’ve all heard the suggestion that first impressions matter and when it comes to the exterior appearance of your home, that couldn’t be truer!
Can you get fined for unauthorized installation?
Make sure that a building permit is pulled for the job, so you don’t get fined for unauthorized installation.
Do you need insulation for vinyl siding?
In addition to vapor barrier, it’s a good idea to have some insulation installed during the installation of vinyl siding. Talk to your contractor to see if the quoted price includes insulation or a foam-backed option.
How much does it cost to install vinyl siding on a house?
Vinyl siding installation on a 2,000-square-foot house with a plain, rectangular shape and no eaves or turrets will run you about $10,000. If your house does have bends and curves, budget an extra $500.
How much does siding cost?
On average, siding a house costs $12 per square foot . For those choosing the most budget-friendly options, that cost may be reduced to $2 per square foot. More expensive materials can be priced at up to $50 per square foot. Common siding types include brick, wood, fiber cement, metal, vinyl and stone.
How does seasonality affect siding installation?
Seasonality also affects siding installation labor costs. In spring and early summer, the peak season for outdoor labor, costs may be relatively high due to demand. Conversely, prices may decrease in the winter months, though the weather may impede working conditions.
What is the cheapest siding material?
While the cost of siding material varies from seller to seller, their relative costs typically fall in line no matter where you shop: Wood tends to be the cheapest siding material, then vinyl, metal, fiber cement, brick and stone. Each of these materials comes with its own set of hidden costs.
What is the easiest siding to install?
Vinyl is typically the easiest and quickest material to install on a home’s exterior, while brick and stone installationis more labor-intensive. But no matter which siding material you choose, the cost of the actual material, not installation labor, should be where you spend the bulk of your money.
What are the different types of siding?
Common siding types include brick, wood, fiber cement, metal, vinyl and stone. NOTE:The beginning half of 2021 has seen an unprecedented labor shortage as a side effect of the COVID-19 pandemic. In conjunction with this, demand for materials and construction jobs has skyrocketed.
Can siding crack in winter?
Some siding materials may also crack or otherwise deteriorate in low temperatures. They may require special care during winter installation, which is important to keep in mind. If you have siding installed in the winter, be sure your contractor is experienced.
