Full Answer
How to compare the prices of window products at Feldco windows?
Prices of window products at Feldco Windows differ according to type, color, size, and features. Thus, it is necessary to compare the prices of various Feldco window types and to put products side by side in order to see the pros and cons.
What is your experience with Feldco?
I had a really good experience with Feldco. I needed new patio doors and windows due to age, extreme drafts and fogging windows that were installed in the 80's. The salesperson Richard Sellers came out, discussed my issues, did his own analysis and measurements and then made recommendations to me that made sense.
Is Feldco the worst company to work with?
Feldco is the worst company to work with! Their ultimate goal is to take your money and never own up to their part of the contract. I have had an issue with my custom bay window for years...yes years! Feldco has sent numerous people out to "fix" the window. The last 2 guys that came (on different dates) both said the window needs to be replaced.
Are Feldco Sophia windows any good?
The Feldco Sophia window is the company's premium vinyl window line. Consumers can expect the Sophia series to deliver a U-factor of .26, SHGC of .27, VT of .51 and a CR of 61. (Click to see what all these window ratings mean.) Not a bad vinyl window based on these numbers, although I'd like to see the air infiltration rate to get a better gauge.
When was Feldco founded?
What is Feldco window?
Does Feldco offer warranty?
What is the average cost to have a window installed?
The national average for window replacement cost is typically $650 per window, or between $200 and $1,800. The average price to replace windows on a 3-bedroom house is between $3,000 to $10,000.
Who makes feldco windows?
Feldco President and Owner, Doug Cook, announced the news to his team last week and the response was overwhelming. He stated “To be named Number One is truly an honor. We have persevered over the past six or seven years.
How much does it cost to install a window Labor only?
Calculate Window Replacement Costs The average double-hung vinyl window will cost you about $600 to $950 to replace and it's reasonable to expect to spend $100 to $300 per window on labor. A typical hourly rate for a window installer or contractor is about $40 per hour.
Where is feldco based?
Feldco Windows, Siding and Doors is located in Chicago, Illinois, United States .
Why use double hung windows?
If you have more room to reach both the top and bottom sashes, a double-hung window is a great option. Because double-hung windows are able to tilt in toward the home for cleaning, they're the perfect fit for rooms on the second story of your home, or where cleaning is difficult outside.
What is the most energy efficient window?
Energy Star-certified replacement windows are the most energy efficient windows available. Each Energy Star certified window is nearly twice as energy efficient as an average replacement window.
Should I replace all windows at once?
Many professionals agree that if homeowners can afford it, they are better served by replacing all their windows in one order. The installation team can complete the full job in a couple of days. When you do all of the windows at once there is less paperwork, less time, and less stress.
How much does it cost to remove and install a window?
Homeowners can expect to pay an average of $100 to $300 per regular window installed or an hourly rate of around $38 to $40. More complicated installations (including oversized and specialty windows) will add to the labor costs. These costs could rise to $800 to $1200 per window installation.
Who is the feldco guy?
CEO Doug CookFeldco CEO Doug Cook on the commercial jingle that is vital to the company's success.
Who started feldco?
Feldco® began with one man and one goal in 1953 when Bernie Feld started selling storm windows in Chicago, Illinois neighborhoods. Still family owned, operated and well-known for replacement windows over fifty years later, Feldco® is the Midwest's leading home renewal company.
Feldco Window Prices 2022 | Replacement Windows Reviews
Feldco Window Prices. Explore Feldco Window prices and costs on many of their most popular replacement windows and sliding doors. Have a question on window quotes, prices, or reviews? Send our site editor Dane your questions, and get personalized answers that can save you thousands of dollars on your project! Please note, our website is not affiliated with this window manufacturer.
Feldco Windows Reviews 2022 | Replacement Windows Reviews
Feldco Windows And Thermal Industries. Feldco actually relabels the Thermal Industries window that uses a pocket sill design, which is a less desirable design feature than the true sloped sill that does not let the water drain through the window frame itself. The Thermal Industries window is not a bad window at all, but its nowhere near the top of the best replacement windows out there.
Feldco Windows, Siding & Doors | Better Business Bureau® Profile
This organization is not BBB accredited. BBB rated Window Installer in Madison, WI. See BBB rating, reviews, complaints, & more
Feldco Sophia Windows Costs
I'm considering the premium Feldco Sophia window and the Soft-lite Pro series. They are about the same price at $680 per window fully installed. Audrey - April, 2019
Feldco Sophia vs. Soft-Lite Pro
I'm considering the premium Feldco Sophia window and the Soft-lite Pro series. They are about the same price at $680 per window fully installed. Audrey - April, 2019
When was Feldco founded?
Feldco was founded and incorporated in its present form in 1976 when it started delighting consumers with premium windows, factory-direct pricing, and certified installers. But the family-owned business goes back earlier in 1953 when Bernie Feld started the business selling storm windows in the Chicago neighborhoods.
What is Feldco window?
Feldco Windows specializes in making house sidings, attic insulation, doors and vinyl replacement windows. Considered one of the leading contractor suppliers for windows and doors in home improvement in the Midwest, the company provides an excellent overall value. Offering free in-home quotations and lifetime warranties, Feldco is considered the best windows manufacturer in the Midwest serving the states of Northwest Indiana, Northern Illinois, Indianapolis, Southern and Northeast Wisconsin, with showrooms in Des Plaines and Rockford in Illinois, Bloomington in Chicago, Indianapolis in Indiana, and Madison, Menasha, and Milwaukee in Wisconsin.
Does Feldco offer warranty?
Thus, it is necessary to compare prices of various Feldco window types and to put products side by side in order to see the pros and cons. When it comes to warranty, Feldco offers different warranties depending on the model, as most of them give their products a certain length of warranty years based on materials and confidence. Therefore, the price of the end product you will get is dependent on your careful selection and inspection.
Feldco - Service complaint
I signed a contract on 8/13/22 for a storm door with a time frame of 12-16weeks and made payment. The door was measured and ordered by Feldco on 8/25/21. Upon the16week deadline of 12/15/21, I called Feldco numerous times for status which each time I was told they did not receive the door from the manufacturer.
Feldco - Doors
I had 2 exterior doors and a patio door purchased and installed. In about June of 21 I ordered 2 exterior doors and a patio door ordered. They told me they were backlogged but I should get them in around August. In the end of October they came in and they called to setup install.
Feldco - Down payment
I put money down to get my roof done with gutters, facial, and soffits which came up to $22,897. I put down $2,290 which brings the total down to $20, 607. The finance company is called Ally Lending which approved my loan, sent me a bill and it was $23, 210. I ask Ally why was it more and what happened to my down payment.
Feldco - Leaking windows
The salesperson and installer gave me the answers I was looking for with the promise that the leaks that we have been experiencing in our basement windows would no longer occur. So, I signed an agreement and paid them $2, 197.00.
Feldco - product requested was not installed
I contacted your company and believed that I ordered and purchased a garden window for my kitchen. On the day of installation a plain window was installed. I immediately contacted the company and was told to allow installation to continue and problem would be resolved.
Feldco - tried to get a quote
I called Feldco windows. They asked if I was the owner of the house. I said why yes my husband and I are the home owners. They said well is your husband around because we cant come give you a quote with out talking to him and him being there when they came out. I said well he works so you get me.
Feldco - Siding and wrapping windows
Hired Feldco to install siding on front of house and wrap windows.
In-Home Consultation
A Feldco Product Specialist will meet with you to determine your project needs.
Installation
A professional installation team will complete your project and ensure that you're delighted!
Where are Feldco windows located?
The Chicago, IL location of Feldco Windows, Siding & Doors specializes in replacement windows, vinyl siding and exterior doors including entry doors, patio doors, storm doors and garage doors for homes in the Chicago area.…
How long does it take Feldco to replace a screen?
The soonest Feldco can come look is 18 days from my call. It took a month and multiple phone calls from me to get a screen replaced. I can't imagine the nightmare in store for me having these windows replaced.
How to contact 4feldco?
Thank you for bringing this to our attention, Justin. We'd love to be able to look into this for you. Please give us a call at (866) 4FELDCO or email us at [email protected] your contact information and project details and we'll do our best to assist you with this and any other outstanding issues.
Feldco Windows Reviews
Read 9 Feldco windows reviews from homeowners and industry insiders who have experience with this manufacturer, their sales techniques, window prices and more. Regional manufacturers with a strong presence in Illinois, Wisconsin, and Iowa. Who makes feldco windows? The company manufacturers their own vinyl windows and doors as far as we can tell.
Feldco Sophia Windows Reviews
The Feldco Sophia window is the company's premium vinyl window line. Consumers can expect the Sophia series to deliver a U-factor of .26, SHGC of .27, VT of .51 and a CR of 61.
General Feldco Windows Reviews
Today I had yet another estimate. The fella said that there are really only 4 or 5 companies that make all the windows in the US, they just get branded differently. He also said that Home Depot uses windows with recycled vinyl and it won't last as long.
When was Feldco founded?
Feldco was founded and incorporated in its present form in 1976 when it started delighting consumers with premium windows, factory-direct pricing, and certified installers. But the family-owned business goes back earlier in 1953 when Bernie Feld started the business selling storm windows in the Chicago neighborhoods.
What is Feldco window?
Feldco Windows specializes in making house sidings, attic insulation, doors and vinyl replacement windows. Considered one of the leading contractor suppliers for windows and doors in home improvement in the Midwest, the company provides an excellent overall value. Offering free in-home quotations and lifetime warranties, Feldco is considered the best windows manufacturer in the Midwest serving the states of Northwest Indiana, Northern Illinois, Indianapolis, Southern and Northeast Wisconsin, with showrooms in Des Plaines and Rockford in Illinois, Bloomington in Chicago, Indianapolis in Indiana, and Madison, Menasha, and Milwaukee in Wisconsin.
Does Feldco offer warranty?
Thus, it is necessary to compare prices of various Feldco window types and to put products side by side in order to see the pros and cons. When it comes to warranty, Feldco offers different warranties depending on the model, as most of them give their products a certain length of warranty years based on materials and confidence. Therefore, the price of the end product you will get is dependent on your careful selection and inspection.
