Is flexiteek easy to maintain?
There is no need for difficult or expensive maintenance when it comes to Flexiteek. Another feature users love about Flexiteek is that it is very light when compared to Seadek. A square meter only weighs 4.5kg.
Is flexiteek better than seadek?
There is no doubt that when compared to Seadek, Flexiteek is very expensive. A square foot goes for about $40 to $42 although it tends to last longer than a traditional wood. There was no information on the manufacturer’s website to confirm these rates. Seadek is also non-skid and therefore is safe for walking barefooted.
Why choose flexiteek 2G teak decking?
It saves weight, reduces fuel usage, makes for greater stability, and ultimately better performance, which is not something that can be said of other competitive synthetic decking. Flexiteek 2G is said to be the only teak decking out there in the market that is UV-resistant.
Is flexiteek 2G flooring good for your feet?
However, Flexiteek 2G, which is an improved version of the original version claims to be cooler to the feet. he company advises that you use a sand paper to get rid of stubborn stains, but users have said that this ends up smoothing the floor and exposing them to danger.
What's better than SeaDek?
SeaDek Alternatives – Our Favorite Boat Traction Pads#1. GatorStep. All Around Favorite. ... #2. AquaTraction. Great Durability for Heavy Use. ... #3 BlackTip Jetsports Sheets. Cheap and Effective. If you're looking for a really good bang for your buck, I have to say that it's hard to beat BlackTip Jetsports' product.
Are teak decks worth it?
A teak deck is a great surface. No matter how much water has come onto the deck from sloshing seas or tough rainfall, under most weather conditions the deck will maintain its traction. This is a big deal, not only for the ease of walking around a wet deck, but also for your safety at sea.
How long do teak decks last?
If cared for correctly a teak deck will wear naturally and should not require overhauling for between 10 – 15 years. Our advice is to wash it regularly as you would with any deck with fresh or saltwater using only a soft brush.
What is the cost of teak decking?
Actually, no. Teak cost varies dependent on the width and the length of the piece. Commonly available widths are 2” to 6,” and their price is lower....Pricing Variables.Length (feet)Length (inches)Approx. Price per board foot*< 5.5 feet long< 71”$166 – 9.5'72 – 119”$2710'120”+$44Oct 6, 2020
Can you pressure wash a teak deck?
The reason we do not recommend pressure washing when cleaning teak furniture is that the fine stream and high pressure can cause the surface of the teak furniture to become bumpy and pitted. Once that happens, the teak furniture will have to be sanded to return the surface it to its natural smooth finish.
What is a good alternative to teak?
Overall, you have a number of options when it comes to Teak alternatives and despite all of its advantages, it's not unmatched. Greenheart is as close as you can get, Ekki is Greenhearts wilder equivalent and Iroko is the go-to if you want timber very similar to Teak but at a much more reasonable price.
Should I oil my teak decks?
Replenish the Natural Oils in the Teak The natural oils in teak do dry out and require occasional replenishing. Most teak oils won't harm the wood but solvents in them can, over time, damage seam compounds. Therefore, don't use teak oil on decks unnecessarily.
How do I estimate the cost of a deck?
The average cost of constructing a deck is $25 per square foot, with most homeowners spending anywhere from $4,380 to $10,500 on the project. A low-cost deck built with basic materials costs $15 per square foot, while a high-end deck costs $35 per square foot.
Should you sand teak wood?
Teak wood dries rather quickly so once the teak wood is dry, it can be sanded to smooth out the grain and the roughness that occurs after it is cleaned. Use an 80-grit sandpaper first to knock down the grain and then use a 120-grit sandpaper to make the teak wood smooth and ready for finish.
Is a teak deck expensive?
Expense and Value of Teak on Yachts Its cost is due to its unique qualities among woods, single remote source, limited quantities, and government control to protect the resource. This is why a quality teak deck is expensive.
How much does teak cost per foot?
Teak LumberTeak Lumber Prices per Board Foot as of Aug 23, 2022Description50-99 B.F.250-499 B.F.4/4 Plantation Teak33.7530.75Plantation grown Tecton grandis.4/4 Teak Lumber, FEQ39.1032.607 more rows
Why do yachts use teak wood?
What makes teak such an ideal wood for its use on the water is its high content of silica and oil, which makes teak extremely weather resistant. Its tight grain creates high tensile strength and its characteristics create a resistance to rot, fungi and mildew.
Does teak get hot?
Teak can get pretty warm when sitting out in the sun, but a PVC deck gets even warmer—around 150 degrees F on a hot sunny day, according to Bill Gribble, president of Ohio-based PlasDECK Inc.
Is Cumaru the same as teak?
Cumaru, also known as Brazilian Teak or Golden Teak, is a naturally durable Brazilian timber with a density similar to Ipe.
How do you repair a teak deck?
1:057:59How to Repair Your Teak Deck - A 10 Step Easy-To-Follow ProcessYouTubeStart of suggested clipEnd of suggested clipStep one check the weather you'd ought to be doing this when it's raining. Step two get all theMoreStep one check the weather you'd ought to be doing this when it's raining. Step two get all the supplies.
Why is teak wood good for boats?
What makes teak such an ideal wood for its use on the water is its high content of silica and oil, which makes teak extremely weather resistant. Its tight grain creates high tensile strength and its characteristics create a resistance to rot, fungi and mildew.
Subscribe to our newsletter
Get the latest news about Flexiteek marine decking Get the latest news about Flexiteek marine decking, information, special deals, and other third-party product offers that we believe you may find interesting. Click here to subscribe →
Flexiteek synthetic teak decking at the Southampton boat show
There will be a lot of synthetic teak decking from Flexiteek at Britain´s best loved on water boat show. When: September 14 – 23 2012 Where: Getting to the show – travel info Flexiteek decking will be on the following boats at Southampton boat show: Dufour 36 performance, New model with its debut at Southampton […]
How long has Flexiteek been in use?
Flexiteek has been in use for over 20 years now, and early decks are still in good condition. Obviously, it will depend on how hard the decks are used.
What is Flexiteek 2G?
Flexiteek 2G is the only second generation synthetic decking on the market and offers a lighter and cooler alternative to others in the market, with a wide range of realistic ‘wood’ finishes and colours.
How to re-sand Flexiteek 2G?
Flexiteek 2G can be re-sanded by hand using 40 to 80 grit sanding paper and working in the direction of the grain. The rougher the sandpaper, the deeper the grain will be.
What type of board is Flexiteek 2G?
If you require, Flexiteek 2G can be supplied on a marine ply, GRP, laminate board or foam layer of varying thickness to enable a snug fit to a recess or edge.
Does Flexiteek 2G need resanding?
Flexiteek 2G requires minimal maintenance, a clean occasionally, and if you start to wear the grain down, a quick resand will return its fresh look and non-slip properties.
Does Flexiteek 2G get hot?
Flexiteek 2G will get warm in hot climates but has been developed to reduce thermal transfer and cools 30% faster than traditional composite decking.
Can Flexiteek 2G be used on teak decks?
Flexiteek 2G can be designed to replicate a teak deck or manufactured to a bespoke design for a modern, contemporary or traditional look; there are no limits to the effects that are possible.
How wide is Flexiteek?
Flexiteek panels are available in either 1- 7/8″ or 2-3/8″ wide “planks,” and buyers can choose panels with either six or more planks, up to a maximum of 12.
How much does Tek-Dek cost?
The cost of Tek-Dek is $24-$25 per square foot , including adhesives for the bedding and tongue-and-groove joints. The company recently extended its warranty to 10 years. This product is also marketed as PlasDECK by a company called PlasTEAK. PlasDECK is made in particular extrusions for specific layouts.
What is synthetic teak decking?
The synthetic teak decking systems we’ve seen—two PVC-based and one cork-based—are, once installed, quite similar in appearance and texture. They look and feel like rough-sanded teak planking (sans splinters), with caulked strips between the planks. Rounded edge pieces, or “margin boards” make for a neat installation, and if a complete deck is desired (rather than, say, a hatch cover), a wider central “king plank” can be obtained.
Can you put a teak deck on a fiberglass deck?
Applying a modern teak deck isn’t impossible ( see PS Nov. 1, 1993), but it’s a time-consuming and fussy job, usually involving drilling holes in the fiberglass deck for screws to hold the teak in place while it’s being glued down. There’s also a good deal of caulking to do—each joint where planks meet must be caulked to keep water from getting under the decking and lifting it. And teak isn’t particularly flexible, so dealing with curves and/or arched decks can be tricky.
Is teak deck good for wet weather?
Teak decks, while providing excellent skid resistance when dry, aren’t quite as good when wet. And teak decks get hot enough in bright sunlight to be distinctly uncomfortable to bare feet and skin.Decks in the old days tended to be fashioned from solid teak planks an inch or more thick, but a modern teak deck typically measures from a quarter inch down to a something in the veneer range, and is ordinarily laid on top of a structural fiberglass deck. A thicker deck is usually not an option, due to the high cost of teak and the amount of above-the-waterline weight that this would introduce.
Is teak decking bad for the environment?
Natural teak decking isn’t without its downsides, though. From an environmental standpoint, natural teak comes from forests that are in real danger of depletion. This factor, re gardless of how you feel about environmental issues, makes teak an expensive material.
Is teak a non-skid wood?
And it provides an excellent natural non-skid surface. Teak is classified as a “heavy” hardwood with a density of approx 930kg/m3. It shows exceptional grain strength and stiffness, along with excellent wear and durability characteristics. And it looks great.
How long does resin last?
It has a similar appearance to teak and can be worked in the same way, but has an expected lifespan of 50 years. The impregnation of resin means end of life disposal is not as easy as for untreated timber – the recommended option is to use it as fuel in biomass generating plants.
How many yachts have Esthec decks?
Saffier has since built nearly 500 yachts with Esthec decks, “all without any problems”. Hennevanger says it is not necessarily a cheaper option to teak, but thinks it should last forever.
Is teak sustainable?
As a result, the only way to be absolutely certain a source of teak is sustainable is to use salvaged material (or to ensure that the teak can be GPS-traced back to stump).
Does teak decking last forever?
However, teak also has drawbacks. Firstly it doesn’t last forever, especially if a modern, and likely relatively thin, teak deck is scrubbed regularly. At the extreme I’ve seen a deck lose 1mm of thickness each year through scrubbing. Given the high cost of replacement this can have a significant impact on a yacht’s resale value.
Is cork better than teak?
In any case the material is inherently resilient and is significantly better than teak at resisting wear and abrasion. Cork is also is a good insulator, so decks remain comfortable to walk on even in strong sun.
Is Permateek decking UV resistant?
The product is therefore very UV resistant and remains elastic as the oils don’t evaporate over time. Fungus inhibitors throughout the material hold back the formation of the green mould that can all too easily grows on real teak decks, especially during persistently damp winters. Permateek decking on a Contest 38.
Is there a ban on importing teak into the EU?
Unfortunately, a ban on importing this illegal timber into the EU hasn’t stopped the trade , as evidenced by court cases in countries including Denmark, Sweden, Germany and Holland following the discovery of illegally imported teak.
How much does Flexiteek cost?
There is no doubt that when compared to Seadek, Flexiteek is very expensive. A square foot goes for about $40 to $42 although it tends to last longer than a traditional wood. There was no information on the manufacturer’s website to confirm these rates.
How much does a square meter of Flexiteek decking weigh?
Another feature users love about Flexiteek is that it is very light when compared to Seadek. A square meter only weighs 4.5kg. It saves weight, reduces fuel usage, makes for greater stability, and ultimately better performance, which is not something that can be said of other competitive synthetic decking.
How much does Seadek decking cost?
The faux teak goes for about $430 for 15sqft according to a user, while a regular 18sqft decking can go for $330. There is no readily available information on Seadek website to verify this how much their products truly costs.
How long is Seadek warranty?
The manufacturer offers 7 years warranty on their product and also added that good maintenance can even increase the number of years users can enjoy Seadek. Some users also claim that the company wants to increase its warranty to 10 years for recreational boats because of its ability to last longer than expected.
What is Seadek boat floor made of?
Theirs is made from closed-cell PE/EVA UV-resistant foam that they claim doesn’t absorb water even when it is wet . They are also quick to state that their product provides the perfect traction when dry or even wet.
Why does Flexiteek floor bubble?
It was also said to be as a result of applying too much glue by amateur installers.
Which is better, Flexiteek or Seadek?
It really is not so easy to decide on which boat flooring is best between Flexiteek and Seadek. However, from the pros and cons, I would say that in terms of durability and easy to fix floors, go for Seadek. And if you are looking for something more versatile and fancy-looking, Flexiteek will certainly be your best shot.
