A cubic yard of gravel, which visually is 3 feet long by 3 feet wide by 3 feet tall, is typically costs ranges from $15 to $75, or the costs of gravel ranges from $10 to $50 per ton, or $15 to $75 per cubic yard, or $1 to $3 per square foot, or $1350 per truckload depending on the rock types, volume, and travel distance.
How much does a yard of crushed gravel cost?
Gravel Cost Per Yard. Bulk gravel costs $15 to $75 per yard on average. Crushed concrete, sand and gravel mix, and crushed shells are the cheapest stones at $15 per yard. Crusher run, pea gravel, steel slag, and river rock typically cost $50 per yard or more. Click to see full answer. Consequently, how much is a yard of gravel?
How much does driveway gravel cost a cubic yard?
White or black gravel driveway. A white gravel driveway costs $2.77 to $4.80 per square foot, $30 to $120 per cubic yard, or $20 to $100 per ton for stones up to 1". A white rock driveway is available in crushed granite, white quartz blends, limestone, and pea gravel.
How much does Crusher run gravel weigh per cubic yard?
how much does crusher run gravel weigh per cubic yard. how much does a cubic yard of ca6 gravel weigh? it weighs approximately 1.75 tons. it can vary some do to the density of the material, amount of water contained in the material and type of material. approximately 2500 lbs.
How much is a cubic yard of crushed gravel?
Plain pea gravel and crushed clamshells are each priced at about $40 per cubic yard and $50 per ton. Crushed stone is costlier at about $55 per cubic yard and $65 per ton. Buying pea gravel in bulk may reduce costs, but different finishes, like gravel with color, will add anywhere from $20 to $50 to the price per unit.
How much area does a cubic yard of gravel cover?
100 square feetAt a depth of 3 inches, a cubic yard of material can be spread over a 10×10 area (100 square feet). It's always good to understand how something is done even if you are going use calculators.
How much is a cubic yard of gravel?
One cubic yard of gravel can weigh between 2,400 to 2,900 lbs. Or up to one and a half tons approximately. Generally, a cubic yard of gravel provides enough material to cover a 100-square-foot area with 3 inches of gravel. Keep in mind that some materials compact more than others, so exact coverage may vary.
What is the cheapest gravel for landscaping?
The cheapest landscaping rock available is pea gravel. This is a versatile landscaping rock that looks great for many types of landscaping, including driveways.
How much is 3 tons of gravel in yards?
2.142 cubic yardsThere are 2.142 cubic yards in 3 tons of gravel. Each ton of gravel equals 0.714 cubic yards. When you multiply 3 x 0.714 you get 2.142.
How much gravel is in a dump truck?
It can carry about 15 to 16.5 cubic yards of 3/4″ or pea gravel per truckload. Thus, a dump truck can have capacity to hold 15 to 16.5 cubic yard of gravel per truckload.
How much does 1 yard of gravel look like?
1 yard of gravel look likes by 3 feet long by 3 feet wide and by 3 feet height which is equal as 27 cubic feet as (length× width× height= 27).
How thick should landscape gravel be?
The suggested depth of coverage varies according to the size of the individual stones. If the stone size is 1/2-inch or less, the suggested depth is 2-inches. Stones that are 3/4-inch to 1-inch should have a depth of about 3-inches. Stones that are 1-inch or larger should have a depth of 4-inches.
How can I make my yard look good cheap?
20 Cheap Landscaping IdeasAdd a walkway. Nancy Buron, Pixabay. ... Save with perennials. Coreopsis / JamesDeMers / Pixabay. ... Spread some mulch. F. D. Richards, CC BY-SA 2.0. ... Plant flowers around your mailbox. Mohan Nannapaneni, Pixabay. ... Plant a tree sapling. ... Raise your garden bed. ... Repurpose items as planters. ... Landscape with lighting.More items...•
What area does a ton bag of gravel cover?
As per general rule of thumb, 850kg, or a bulk bag, or tonne bag of gravel, chipping, or pebbles will cover approximately 12 square metres (12m2) area at recommended depth of 5cm (50mm) thick, and 16 square metres (16m2) at 3cm (30mm) thick.
How many yards is a dump truck?
Dump Truck Cubic Yardage - The Basics While there is room for variance, most full-size dump trucks have a capacity of between 10 and 16 cubic yards.
How many tons is a dump truck?
On average, large dump trucks can carry roughly 28,000 pounds or about 14 tons. Smaller dump trucks can manage about 13,000 pounds to 15,000 pounds or 6.5 to 7.5 tons. Dump truck pricing can vary widely, so it's important to consider your needs carefully.
What size gravel is best for driveways?
around ¼”-1”The ideal gravel size is around ¼”-1” and selecting gravel that is not too large and flat, or too large and roundish will ensure you better results and less issues and a better surface. Most commonly used is 57 Granite, Crusher run, Small pea gravel and even Alabama Path Stone.
How much gravel do I need for a 1000 foot driveway?
At 4″ thick, for 1000 square foot driveway, you will need approximately 330 cubic feet, or 13 cubic yards, or 19 tons of gravel, if you are using 1/4″ to 1″ size of gravel and for 100 square foot, 1.25 cubic yards, or 2 tons of gravel will be required.
Will a yard of gravel fit in a pickup?
Full-size Pickup Trucks: Can usually handle 2 cubic yards of soil, 2-3 cubic yards of mulch, and 1 cubic yard of stone or gravel.
How many cubic yards does a dump truck hold?
Dump Truck Cubic Yardage - The Basics While there is room for variance, most full-size dump trucks have a capacity of between 10 and 16 cubic yards.
How much will a ton of gravel cover?
approximately 100 square feetA ton of gravel will cover approximately 100 square feet, 2 inches deep.
How much does it cost to install pea gravel?
You can choose between installing the pea gravel yourself or hiring professionals to handle that project. If you’ve opted for the latter, you can expect to pay $260.
How much does pea gravel cost?
Pea gravel is sold in different quantities so homeowners can purchase the exact amount they need. A ton of pea gravel that can be used for landscaping purposes costs $45. Ordering a truckload of pea gravel that contains 25 tons of the material will cost $400. Homeowners can also pick up a bag of pea gravel for $5.
How much land can a ton of pea gravel cover?
A ton of pea gravel will be able to cover a substantial amount of land. It should be enough to completely cover a property that measures 100 square feet. That will be the case as long as the layer of pea gravel is no deeper than two inches.
What to do if your yard gets flooded?
Install the pea gravel on parts of your property that get flooded often. The pea gravel will prevent water from accumulating in those spots and you’ll have a cleaner yard as a result.
Why are pea gravel driveways so expensive?
Pea gravel driveways are pricey because they have to be deep. Creating a driveway that deep should prevent the pea gravel from moving around too much.
What is pea gravel?
Pea gravel is a ubiquitous landscaping element. You’ve probably heard a lot about it already if you’ve been talking to landscaping experts about your yard. The practical and aesthetic benefits of using pea gravel are well-known and your household could find them useful as well.
Can you use pea gravel as filler?
Choosing rough pea gravel is not an issue if you’re mainly using it for filler. As long as the areas you’re covering with rough pea gravel don’t get a lot of foot traffic, you’ll be fine.
How much does gravel cost?
Small bags typically cost $2-$8 or more, depending on size, type and location; up to five gallons of gravel can cost $3-$9 or more. For example, Home Depot charges $3.90 for a 50-lb. bag of all-purpose gravel [ 1] . and Seffner Rock & Gravel [ 2] in Tampa, FL sells white or brown river rock in 3/8", 3/4" or 1.5" sizes for $5.65 for five gallons.
How much does it cost to haul gravel?
A cubic yard of gravel (weighing roughly 1.2 to 1.7 tons) costs about $10-$90 or more if hauled away by the customer, or $20-$120 or more delivered. For example, at Edstrom Construction [ 4] in Rexburg, ID charges 3/4" road base gravel is $9.75 per cubic yard for 3/4" road base gravel or $16.80 delivered locally; decorative gravel is $21 a cubic yard or $28.05 delivered. The Rock Shop [ 5] in Durham, NC charges $36 per cubic yard of for driveway gravel and $89 per cubic yard for 1" decorative tan gravel; delivery requires a minimum of 2 cubic yards of material, and additional fees apply.
How much does it cost to install a gravel driveway?
Complete installation of a gravel driveway starts at roughly $0.75-$3 or more a square foot, or about $300-$1,000 for a 12'x25' single-car driveway, 4"-8" thick. Prices can double for a roadway-quality gravel driveway, or $450-$1,800 for 12'x25' and $11,000-$60,000 or more for a driveway 12' wide and a quarter-mile long.
Where to put bulk gravel?
When buying bulk gravel, it's typical to check in with the stone yard office, weigh the hauling vehicle, load the material, then weigh the vehicle again to calculate the cost. With delivery, the gravel may be deposited in one pile at the curb, or spread out along the planned driveway, depending on the terms of delivery.
What is gravel used for?
Gravel can be used as ground cover; as a base for roads, driveways, walkways or patios, or on its own as both base and surface material for paving projects.
How much does gravel cost per square foot?
There are several different types of material for a driveway and the price can run between $0.40 and $2 per square foot. The gravel material is usually priced by the cubic yard or by the ton.
How much does a gravel driveway cost?
A gravel driveway costs as little as $300 or as much as $60,000 for an extra-long driveway . The average cost for a 16- by 38-foot gravel driveway is $1,500. A gravel driveway can be a functional, budget-friendly feature for any home. If you’re interested in an alternative to an asphalt or concrete driveway, gravel may be the way to go.
How much does pea gravel cost?
Crushed clamshells or plain pea gravel costs around $40 per cubic yard or $50 per ton. If you buy pea gravel in bulk, you may qualify for a discount. Crushed stone runs approximately $55 per cubic yard and $65 per ton. Colored gravel can add an extra $20 to $50 per unit.
What is the best gravel driveway base?
Along with base #1, base gravel #3 is considered one of the best gravel driveway bases. Item #4 is another standard base layer for gravel driveways. Item #4 is usually made of crushed gravel, dirt, and sand, but it can sometimes contain recycled asphalt, bluestone, or limestone. Item #4 costs between $12 and $22 a ton.
How to calculate the square footage of a gravel driveway?
Add the depth of each 4-inch layer together (4+4+4) to get 12 inches or 1 foot. Multiply the length and the width of the driveway to find the square footage: 16 feet x 38 feet = 608 square feet. To find the total cubic feet, multiply the total depth (1 foot) by the area (608 square feet) to get the total volume of gravel needed (608 cubic feet). Once you have this number, you can consider the types of gravel available and estimate the gravel driveway cost.
Why does the price of a new gravel driveway change?
This price can change because of local labor costs, the difficulty of the job, and the geographic area. Labor rates typically include the cost of supplies and equipment, but check with your contractor. If the new gravel driveway is replacing a paved driveway, prepare to pay more for removal.
How much does it cost to build a gravel driveway?
Professionals recommend the minimum depth of a gravel driveway be 4 inches. The average price for a single-car driveway ranges from $360 to $900, and a parking stall can cost between $400 and $600. A single-car turnaround runs approximately $400 to $600, and a two-car turnaround is $800 to $1,200. A two-car driveway can cost between $1,000 to $2,200, and a three-car driveway can run from $1,500 to $3,000.
How much does gravel cost per square foot?
White gravel shimmers in the light, and can cause a glare on sunny days. Black gravel driveway rocks from 0.50" to 1" in size cost $3 to $10 per square foot, $96 to $140 per cubic yard, or $76 to $85 per ton. Black lava rocks are the most common and affordable, while true-black granite chips are rare.
How much does gravel cost?
Gravel prices for a driveway range from $10 to $50 per ton or $15 to $75 per yard depending on the rock type, volume ordered, and delivery fees. When including delivery, spreading, and compacting, driveway stone and rock costs $100 to $120 per ton installed.
How much gravel does a HDPE grid need?
HDPE plastic rings connected by an interlocking geogrid structure allow for a 1" gravel fill and require 0.66 cubic yards of gravel per 100 square feet of grid.
How much does a white gravel driveway cost?
A white gravel driveway costs $2.77 to $4.80 per square foot, $30 to $120 per cubic yard, or $20 to $100 per ton for less-expensive white stones up to 1". A white rock driveway is available in crushed granite, white quartz blends, limestone, and sometimes pea gravel. White gravel shimmers in the light, and can cause a glare on sunny days.
What is the best driveway for long driveways?
Gravel driveways are a popular paving choice for long driveways because it's cheaper than asphalt and concrete, comes in many colors, eco-friendly, and adds curb appeal.
How much does it cost to build a crushed limestone driveway?
A crushed limestone driveway costs $1.50 to $2 per cubic foot , $40 to $54 per cubic yard, or $30 to $38 per ton for up to 1" stones. Crushed stone gravel can come in any color, though most popular crushed stone blends are in neutral, earth-toned colors.
How much does it cost to spread gravel?
The cost of spreading gravel on a driveway is $10 to $25 per cubic yard, or $46 per hour per worker, though this cost may be included with gravel delivery charges. After spreading, each layer of gravel needs to be compacted together to increase stability, and to prevent ruts and sinking.
How much is a yard of gravel?
To calculate the weight of the material, you simply have to multiply the volume by the density. Fortunately you don't have to remember the density of gravel - our calculator sets this value for you by default. Of course, if you decide to use some unusual aggregate, change the density as you need; this function is available in the Advanced mode.
How much gravel do I need?
Step one is establishing the volume of gravel needed. It is equal to the volume of an excavation, and you can do it in the following way:
How to calculate the volume of gravel needed?
You can calculate the required volume of gravel by multiplying the gravel path area by the desired thickness:
How to find area of excavation?
Calculate the area of the excavation, multiplying the length and width together. In our case, A = 6 * 3 = 18 yd². You can also type the area of the excavation directly into the gravel estimator if you choose to excavate a more sophisticated shape. We've got calculators to help you find the areas of many geometric figures like triangles or pentagons. For even more examples, visit the 2d geometry section of our math calculators page.
What is the volume of gravel required?
The volume of gravel required is equal to the volume of excavation. Our gravel calculator will display this value for you.
What are some examples of angular gravel?
Examples of angular types of gravel are decomposed granite, lava rock, and quartzite. Color – this is an important attribute of landscape gravel, as it needs to fit your personal taste and the environment – the style in which your house and yard are designed.
Is it a good idea to lay gravel on multiple layers?
Furthermore, the thicker gravel layer will be, the longer it will last and the more resilient to wind, heavy raining or your children and pets 😉 it will be. Keep in mind that it may be a good idea to lay multiple layers of different types of gravel, as we have mentioned in the previous paragraph.
