Depending on where you live, expect to pay the following for a range of drainage jobs:
- $80 to $120 to unblock a simple toilet or kitchen drain
- $300 to $500 to clear a short stretch of blocked drain
- $1000 to $3000 to replace a portion of your drainage piping
- $5,000 to $20,000 to replace your entire drainage system, depending on the scale of the job.
How Much Does a Plumber Cost to Unclog a Drain?
How Much Does It Cost to Unclog a Drain by Type?
When should you call a plumber for a clogged drain?
How to keep drains free from debris?
What causes a drain clog?
See 2 more
About this website
How much does a plumber charge to unclog a drain?
The average plumber costs $100 to $275 to unclog a drain for a toilet, sink, or tub. Roto-Rooter prices are $225 to $500 to snake a drain. Drain snake rental costs $30 to $80 per day. DIY drain cleaning costs $15 to $100 to buy a basic plumbing snake.
How much does Roto-Rooter charge to unclog a drain?
According to Angie's List, Roto-Rooter typically charges between $160–$450 for common plumbing issues such as dripping faucets, line repairs, or clogged drains.
What is the average cost to snake a drain?
How much does it cost for a plumber to snake a drain? According to HomeAdvisor, the average cost to have a drain professionally snaked is $220, with a range of $136 to $305.
How do you unclog a severely clogged drain?
A lot of folks know the baking soda and vinegar trick. Simply pour some hot water down your clogged drain and follow it up with equal parts baking soda and vinegar (baking soda first), cover the drain with a plug if you have one, let it sit for 20-30 minutes, then follow it up with more hot water to clear the clog.
When should you call a plumber for a clogged drain?
If you have more than one drain in your home that is backing up or there is a scent of sewage in the air, it's time to call the plumber out to snake your drain line as soon as possible. If you have tried the plunger and it isn't clearing the drain with vigorous plunging, you will need a plumber.
How much does it cost to fix drainage problems in a house?
As a general range, houses of small to mid-size with short crawlspaces and mostly dirt around them average around $35,000 for complete drainage systems. Houses with full basements and stairs and patios that need to be removed and repaired can run up to $80,000, with drainage 8' deep all around.
Who pays for drain repairs?
homeownerGenerally, as a rule of thumb a homeowner is responsible for the drains that fall within the boundaries of their property and in the event of something going wrong, they will be required to pay for the repairs needed.
How much does it cost to fix drainage in a house?
The average cost of a drainage system in a yard is $1,000 to $4,000. An underground downspout drainage system costs $150 to $350 per downspout. A basement or interior perimeter drain tile system costs $4,000 to $12,000.
How long does it take Roto-Rooter to unclog a drain?
As with other expedient services, you typically will pay a premium for the convenience of having a plumber show up at any time of day or night, and quickly—often within 30 minutes.
How long does Roto-Rooter take to clear a drain?
In most instances, we'll be there in two hours or less! Many plumbers won't get to you for days. Your Roto-Rooter plumber will assess the problem in person then provide a full cost estimate for making the necessary repairs.
Does Roto-Rooter unclog drains?
Clear Clogged Drains In Your Home Fortunately, Roto-Rooter's trained technicians are well-trained to clear all types of drain clogs.
How do you know if your main line is clogged?
Here are a few signs that it's your main line that's clogged.Multiple slow-running drains. If more than one drain is running slow, it's probably not a coincidence, but an indication that one clog is causing issues for all of them. ... Water backing up into other drains. ... Gurgling sounds. ... Sewage odors coming from the drains.
How much does it cost to repair a clogged drain?
Average cost to repair a clogged drain is about $110 . Find here detailed information about clogged drain repair costs.
How much does a plumber charge for a clogged drain?
Some plumbers charge a $50 to $200 minimum service fee. Signs of a clogged drain include gurgling sounds, water backing up or pooling, water draining slowly, toilet not flushing, or bad odors. Plumbers take about five minutes to snake a drain for clogs located near the tub, toilet, or sink. Main sewer line clogs impact all ...
How much does it cost to clean a toilet drain?
Drain cleaning costs $100 to $275 on average for a toilet, sink, tub, or shower drain. Cleaning multiple fixtures at once or complex clogs in the main line costs $200 to $800. The most cost-effective solution is cleaning the blockage right away to prevent the problem from worsening.
How Much Is A Plumbing Snake?
A handheld or drill-activated plumbing snake costs $15 to $100 and reaches up to 25 feet for minor clogs near the sink basin or toilet. A machine-powered plumbing snake costs $250 to $1,000 on average and reaches 50 to 75 feet for most residential blockages.
How much does it cost to unclog a kitchen sink?
The average cost to unclog a kitchen sink is $100 to $220. When unblocking a sink with a garbage disposal, the plumber first confirms the unit is not the problem. Then, the drain trap fitting and drain arm are removed to snake the pipes. If the sink is still clogged after snaking, garbage disposal replacement costs $185 to $379 on average.
What to do when a drain snake fails?
When a drain snake fails to remove a clog or if the main line is clogged, call a professional plumber.
How much does it cost to rent a drain snake?
Drain snake rental costs $30 to $80 per day, between $125 and $300 per week, or from $300 to $1,000 per month, depending on the machine auger size. Handheld plumbing snake rental costs $10 to $15 per day. Plumbing snakes are available for rent at Home Depot and Lowe's.
How big is a drain snake?
Drain snakes range from 25' to 100'. A 25' snake unclogs showers, tubs, and bathroom sinks. A 50' to 75' plumbing snake clears washing machines, bathroom and kitchen sinks, and roof vents. A 75' to 100' snake unblocks drains 3" or larger. A toilet auger is specifically made for toilets.
How much does it cost to clean a drain?
The process to clean a drain is the same around the U.S. but prices can vary slightly depending on where you’re located. Here are some examples from around the country: 1 Baltimore: $150–$350 2 New York: $150–$350 3 Salt Lake City: $120–$280 4 Detroit: $230–$280 5 Dallas: $140–$280 6 Indianapolis: $100–$260 7 Los Angeles: $110–$320 8 Jacksonville, FL: $110–$210 9 Seattle: $211–$510 10 Minneapolis: $100–$210
What Will It Cost Me to Clean a Drain Myself?
You can clear the most common drain clogs yourself using things you already have around the house.
How Much Does It Cost to Clean Different Types of Drains?
Most plumbers will charge for time and materials. Drain cleaning is a relatively quick job for a pro with heavy-duty tools. So unless there are complications, assume an hour or two for labor.
What do you need to clean a sink plunger?
If you didn’t have luck with the plunger or the snake, clean the P-trap, which is the bent pipe under the sink. You’ll need a wrench, bucket or big bowl, and some towels (things are about to get wet).
How hot should water be for a slow drain?
Make sure the water isn’t boiling hot (keep it under 140 degrees Fahrenheit) if you have plastic pipes. For bigger back-ups, though, you’ll probably need to pull the clog out.
How much does it cost to remove soap scum from a shower drain?
Calling a pro out to remove the clog costs about $225 .
What is the first rule of plumbing?
The first rule of plumbing is nothing but water, toilet paper, number one and number two go down the drain. To prevent clogs, get yourself: A compost pail. That’s where you clean plates, drain grease, and toss veggie scraps and paper towels. Drain screens for the shower, tub, and bathroom sink.
How much does a plumber cost?
Typical hourly rates for plumbers cost between $45 and $200. Journeymen charge about $45 to $90 per hour, but they are only licensed to handle the most common household repairs. Complex problems or installations will require the help of a master plumber. Master plumbers are fully certified, and in some states, are the only ones who can legally complete some tasks.
How much does a plumber charge per hour?
Expect to pay between $45 and $200 per hour for a plumber, depending on the factors above. The average rate is usually $70 to $120 per hour, not including any trip fees or materials. Small repair jobs don’t require a permit to complete the task. Still, suppose a plumbing job involves the sewer line, inaccessible pipes, newly installed plumbing, plumbing rerouting, or water heater installations. In that case, a plumber will be able to obtain the proper permit from local authorities. Every location is different, but the average permit cost is $75.
How much does a master plumber charge?
Journeymen are certified to complete most common household plumbing repairs independently with an hourly rate of $45 to $90. Master plumbers charge an additional $25 to $75 an hour or more , but they’re qualified to handle complex tasks.
How does geographic location affect plumbers?
Geographic location affects the cost of hiring a plumber since skilled laborers have a higher hourly rate in most urban cities. Additionally, if the region has a shortage of plumbers, the increased demand for plumbers may have boosted rates more than usual. Enter your zip code into a plumbing cost calculator to determine the average rate for your location.
How much does a plumbing inspection cost?
It’s a helpful tool for people looking to purchase an older home or a home with possible signs of plumbing problems. For an average cost of $165, a plumber can do a home inspection to determine the state of your plumbing system from top to bottom.
What does a plumber do?
Leave the jury-rigging to your dad: Professional plumbers work to solve problems with long-term solutions to make sure they have happy customers and reliable reputations. You’ll often receive helpful tips from plumbers about what to watch for or how to prevent future problems.
What to do if there is water in basement?
If there are water spots or damp areas in a basement, have a plumber check for leaks. Some basements are dark and moist already, so adding extra water only adds to the potential growth of dangerous mold or bacteria. Stay on top of water damage in the basement to avoid respiratory problems.
How Much Does Snaking a Drain Cost?
Ok, now that we’ve covered the basics of snaking drains, let’s talk about the typical costs involved for hiring a professional plumber to snake a drain.
How much does it cost to drain snake?
That said, the national average cost of drain snaking is around $225, but we’ll include some more specific per-project costs below.
What Are The Different Ways to Snake a Drain?
There are several different methods and augers you can use to snake your clogged drain, depending on the experience level of the person performing the service and the fixture to which the drain is attached.
What Do You Need To Know About Snaking Drains?
Many homeowners believe that drain snaking is a simple process that can fix any clogged drain.
What Should You Look For In A Drain Cleaning Specialist?
When you’re choosing a professional to snake your drain, you should always opt for one with years of experience, extensive training, and proper plumbing certification. Handymen and general contractors can snake drains for you, but they’re far less proficient than a master plumber would be.
Why do you snake your drain?
Snaking helps clear drains because the coil naturally catches material stuck in your clogged pipes and pulls it outward as you spin the handle. In bathroom sinks and showers that typically get clogged because of hair, the hair gets snagged on the coil and can easily be pulled out of the piping.
Why do plumbers charge more to snake toilets?
Most plumbers charge slightly more to snake a toilet because special equipment is needed, the clogged material is likely larger and more challenging to remove, and the job is less pleasant.
What Should You Look For In A Drain Cleaning Specialist?
When you’re searching for a plumber to clear your shower drain, you should make sure to choose someone with experience, adequate training, and plumbing certification. General contractors and handymen can offer drain cleaning services, but you may only get a temporary fix with these professionals. A master plumber will be able to assess the situation and provide a permanent solution.
When Should You Hire A Professional To Unclog Your Shower Drain?
Many property owners who are experienced with DIY home improvement solutions won’t have any issues using natural methods, plunging, and even snaking to clear their shower drain.
What Are The Different Ways to Unclog a Shower Drain?
There are several different methods you can use to unclog a shower drain, some of which should be reserved for a professional plumber. We’ll discuss each of the strategies below.
What is the best way to clear a clogged drain?
Your plumber may recommend the use of a hydro jet if there isn’t any other available method to remove the blockage. A hydro jet may be the best solution to remove recurring clogs or to clear out blockages if multiple drains are clogged.
How to get a clear cost for hydro jet service?
The only way to get a clear cost for a hydro jet service is to get a proper estimate from your plumber.
Is it safe to use liquid drain cleaner?
This pipe cleaning method is a lot safer to use than other cleaning solutions. For example, when using a liquid drain cleaner, the chemicals may or may not clear the waste in your system. They can also damage your piping system, making dealing with the clog dangerous.
Does hydro jet service harm your pipes?
Plus, with hydro jet service, you won’t have to worry about using any toxic chemicals in your pipes. This means you won’t have to worry about the possibility of any hazardous material harming the health of yourself or your loved ones.
How Much Does a Plumber Cost to Unclog a Drain?
Most clogged drains are considered an easier job and don’t require too much work. The only exception would be in the instance that there’s a major line blockage from something entering the drains that shouldn’t, like a toy or jewelry.
How Much Does It Cost to Unclog a Drain by Type?
Where the clog is originating plays a portion into the final costs. The harder to reach the clog is, the more tools and work the professional you hire is going to need.
When should you call a plumber for a clogged drain?
You should try out the DIY methods of unclogging your drain first on the day you notice the clog. If it persists after you’ve tried everything, call a plumber the next day.
How to keep drains free from debris?
Once you have cleaned your drains, try to keep them free from debris. Avoid scraping too much food into your garbage disposal and never pour grease down your drains. Remember to remove clumps of loose hair from your pipes as well. Make this task easier by investing in snugly-fitting, metal screens for all your drains. With regular maintenance, you can avoid having to pay the costs for clearning clogged drains.
What causes a drain clog?
Clogged drains typically happen because something that’s not supposed to be in your pipes has found a way there. This can be garbage, sediment, or things like toys.
