Full Answer
Is it cheaper to concrete or blacktop?
The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 to $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 and $6.00 per square foot for a standard installation.
How do you estimate a concrete driveway?
How to calculate concrete:Determine how thick you want the concrete.Measure the length and width that you'd like to cover.Multiply the length by the width to determine square footage.Convert the thickness from inches to feet.Multiply the thickness in feet by the square footage to determine cubic feet.More items...•
How much does it cost to pour a 24x24 slab of concrete?
Based on an average cost of $4 to $8 per square foot, a 24×24 slab may cost $2,304 to $4,608. However, those estimates include material, labor, and a six-inch slab. If you want a more accurate estimate, use the following guide to explore the costs of a 24×24 concrete slab.
What is the cheapest type of driveway?
gravelOf the four paving materials described in this guide, aggregate (gravel) is the least expensive, followed by asphalt, concrete, and paving stones. If you're installing your driveway on a shoestring budget, gravel is your best choice. If you have more wiggle room, you'll have more choice.
How long does a concrete driveway last?
25 to 30 yearsThe average life of your concrete driveway will depend on installation methods, environmental conditions and temperatures. However, you can expect your surface to last anywhere from 25 to 30 years with proper care. The key to prolonging the life of your investment is to pay attention to wear and tear each season.
How deep do you need to dig for a concrete driveway?
Most residential concrete driveways are 4” thick and placed on a compacted 4” to 8” thick base of gravel or crushed stone. Adding rebar can double or almost triple the strength of a standard 3,000 PSI concrete driveway. Increasing to 5” will increase the strength by about 50%, and even more with rebar.
How much would a 20ft by 20ft concrete slab cost?
You can expect to pay between $1,600 and $3,200 for a 20×20 slab. The estimates are based on the average cost of $4 to $8 per square foot for a concrete slab. Yet, the costs may vary.
How much does it cost to pour 1500 sq ft of concrete?
So, how much does a 1500-square foot concrete slab cost? The national average price for a concrete slab is $4 to $8 per square foot. The median price is $6 per square foot. Based on the national average, a 1,500-square foot concrete slab may cost $6,000 to $12,000.
How much does it cost to pour 1200 sq ft of concrete?
A concrete slab costs between $4.34 and $7.73 per square foot, with an average cost of $6.60 per square foot. The national average cost of a concrete slab is $6.60 per square foot for materials and labor. Most homeowners can expect to pay between $4.34 and $7.73 per square foot for concrete installation.
What type of driveway adds most value?
Why Is An Asphalt Driveway The Best Option? Pound for pound, asphalt is the building material that gives you the most bang for your buck. Concrete can cost $6.00 to $10.00 per square foot whereas the price of asphalt typically ranges between $4.00 to $6.00 per square foot.
How much is a 700 ft driveway?
For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000. The cost of pouring a concrete driveway depends on the quality of the concrete.
What type of driveway lasts the longest?
ConcreteConcrete, cobblestone, asphalt, brick, and interlocking pavers are the most durable driveway installation options available today. Apart from their lengthy lifespans, these materials also hold up well in any climate, require minimal maintenance, offer a smooth drive, and elevate your home's first impression.
How do I calculate my driveway?
Measure the length of your driveway in linear feet. Measure the width of your driveway in linear feet. Multiply the length x width to calculate the total square footage of your driveway.
How much does it cost to lay 1000 sq ft of concrete?
Pouring a 1,000 square foot foundation costs between $5,000 and $8,000 on average.
How much does it cost to pour 20x20 concrete?
COMPARE COSTS FOR SMALL, MEDIUM AND LARGE PATIOS A 20-foot by 20-foot concrete patio runs between $1,200 to $6,000, including labor and materials.
How much does it cost to concrete 1000 sq ft?
The average cost to lay down a 1,000-sq-ft concrete slab is around $3,000, which is around $3 per square foot.
How much does stamped concrete cost?
Stamped concrete driveways cost $12 to $18 per square foot , depending on the number of colors and patterns. Stamped concrete, also called patterned or textured concrete, replicates the look of stone, brick, or tile. Installers use a texturized mat to imprint a pattern directly into the concrete.
How thick should a driveway be for a car?
A residential concrete driveway should be 4 inches thick to hold standard passenger cars. For heavier vehicles or RVs, a thickness of 5 to 6 inches is recommended, which increases the load-bearing capacity by 50%.
How much does a concrete driveway cost?
A plain gray concrete driveway costs $4 to $8 per square foot. Adding a stain, basic border, and broom-finish texture increases the price to $8 to $12 per square foot. A stamped concrete driveway with multiple patterns, colors, decorative borders, and sealing costs $12 to $18 per square foot.
How much does it cost to pour concrete?
Cost to pour concrete driveway. The average cost to pour a 1,000 sq. ft. concrete driveway slab is $4,000 to $8,000 or $4 to $8 per square foot, depending on the size, shape, and decorative finishes. Small driveways may cost more per square foot because most installers have a minimum job price. Cost to pour concrete driveway.
How much does it cost to install a concrete driveway?
A concrete driveway costs $1,600 to $6,400 to install or $4 to $8 per square foot on average. The cost to pour a new concrete driveway with decorative colors, borders, stamped patterns, and finishes is $8 to $18 per square foot. Old driveway removal adds $1 to $3 per square foot when replacing.
How much does a driveway permit cost?
A concrete driveway permit costs $50 to $200, depending on location. Most cities require a permit for new driveway installations, but may waive the fee if there's already a paved apron connecting the property to a public street.
How much does it cost to remove a driveway?
Removing an old driveway costs $1 to $3 per square foot, including demolition and hauling away the debris. Removal costs depend on the size, conditions, disposal fees, and if the concrete is reinforced with rebar or wire mesh.
How much does it cost to remove a driveway?
Existing driveway removal – This normally runs in the neighborhood of . 50 – $1.50 per square foot. This involves the use of heavy equipment, such as: Jack hammers, Bobcats, etc.
How much does a 2 car driveway cost?
x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
Can you install concrete driveways?
Installing Concrete driveway isn’t an easy task to perform and can leave you with a sore back. You might find it more cost effective to hire a landscaping or, mason company to perform the work for you. Landscaping or, mason companies will most always get better prices on Concrete driveway — saving your back and additional costs, so shop around, ask your neighbors if they can recommend someone.
When to get contractor pricing?
Try to get prices in late Fall, early winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season.
How much does it cost to replace a driveway?
Replacing your driveway will cost somewhere between $2,200 and $7,500. That consists of both the rate to get rid of the existing concrete (which costs about $540 to $1,510) and the brand-new setup cost of anywhere from $1,800 to $6,000. The specific rate depends upon the size and kind of cement.
How much does it cost to put stamped concrete in a driveway?
Setting up stamped concrete will cost somewhere between $8 and $15 per square foot. This alternative enables you to include patterns and texture in your driveway. You can mark the material to seem like inlaid stone, tile, and even strong marble.
How much does a concrete driveway cost?
A simple concrete driveway will vary somewhere between $4 and $7 per square foot. That consists of about $3 to $4 per square foot for products and $2 to $3 per square foot for labor. A strong blend with 5,000 or more pounds per inch strength leaves you at the higher end of that range.
What factors affect the price of a concrete driveway?
The vast ranges throughout this article are mostly due to the many elements that can affect the price of your concrete driveway. Style, products, labor costs, and the location and environment in which the setup happens all contribute.
HOW MUCH IS A CONCRETE DRIVEWAY?
The best way to find out what you'll pay for your project is to get quotes from concrete driveway contractors near you. But, to help you budget, here are average price ranges for decorative concrete driveways:
DOES A CONCRETE DRIVEWAY INCREASE HOME VALUE?
This can set the tone for potential buyers that the rest of the property will follow suit. The durability, lower maintenance requirements, and longer lifespan of concrete (vs. asphalt) also adds to its ultimate value.
What is the most variance in concrete?
Design: With the many design options concrete offers, this is where the most variance can occur. From simply including an integral color in the mix to a complicated stamped and stained design, the parameters are really up to you and what you want to spend. (See pictures of decorative concrete driveways .)
What is the driveway of a house?
The driveway is often the first thing visitors, or potential buyers, see when they arrive at your home. To make a good first impression, it should be welcoming, clean, and in good repair. This can set the tone for potential buyers that the rest of the property will follow suit.
How many square feet are there in a 2 car driveway?
is 16 x 40 feet, or a total of 640 square feet. Many driveways may be larger or smaller, depending on the distance from the garage or house to the street and possible extensions for RV parking.
How long does concrete last?
Concrete is more durable than asphalt and requires less maintenance. It can last for decades, while asphalt will generally only last 10 to 15 years before needing replacement. There are many repair options for concrete as well that can extend its life even further.
How much does it cost to replace a concrete driveway?
What does it cost to replace a concrete driveway? In addition to the installation costs noted above, you can expect to pay approximately $1.00 per square foot for tear out and removal of your existing driveway. There may be additional disposal costs as well.
How long does a concrete driveway last?
Asphalt driveways last 15 to 30 years, and concrete driveways last 30 to 40 years on average, depending on the climate and usage. Brick and stone pavers last 25 to 50 years. A cobblestone or gravel driveway lasts up to 100 years if well-maintained.
What is the cheapest driveway material?
The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.
How much does gravel cost?
Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.
How much does it cost to build a driveway?
The cost to build a driveway ranges from $600 to $18,000, depending on the material. The cheapest driveways cost $1 to $3 per square foot for gravel, while standard concrete and asphalt driveways cost $3 to $8 per square foot.
How much does an exposed aggregate driveway cost?
Exposed aggregate or pebble finish driveways cost $5 to $11 per square foot or $3,000 to $6,600 on average. Exposed aggregate features stones mixed into concrete or seeded on the surface. Natural aggregates provide a textured, nonskid surface in various colors, including pastels, earth tones, and deep reds and blues.
How much does a chip seal driveway cost?
Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.
How much does a driveway permit cost?
A driveway permit costs $50 to $200, depending on location. Most cities require permits for new driveway installations and replacements but not for repairs. Some municipalities waive the permit fee if there is already a paved apron connecting the property to a public street.
How thick should a concrete slab be?
Most residential concrete slabs are between 4” and 6” inches thick with the minimum recommended being at least 4”. This thickness is recommended for walkways, driveways, patios, and garages. Commercial driveways can be 6” to 8” inches thick to bear up under traffic from heavier delivery vehicles. Check local building codes to find out how thick your concrete slab needs to be.
What is a slab on a grade?
Slab on grade refers to a concrete slab that's used as a foundation for a structure. The slab is created from a mold built into the ground that’s reinforced with rebar and wire mesh. The frame is constructed from wood, and the concrete and aggregate are poured into the mold to harden.
How much does a 6" concrete slab cost?
At an average cost of $6.17 per square foot for a 6" slab, here are the average prices by size:
How much does a 24x24 garage slab cost?
A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete. [11] [12]
How much does a 4 foot foundation cost?
Most homeowners spend between $5.40 to $6.40 per square foot for a 4” thick foundation, and $6.40 to $8.20 per square foot for a 6” reinforced slab on grade. A 1,600 square foot reinforced concrete slab foundation costs $11,680 on average.
Why does my concrete slab crack?
The growth of tree roots underneath the concrete slab can cause cracks as they grow larger, pushing the dirt up under the concrete.
How much does it cost to pour concrete?
On average, to pour a concrete slab costs $5.35 to $6.17 per square foot for both labor and materials. Your total price depends on the thickness of the slab, and if you chose to reinforce your slab with wire mesh or rebar.
