Full Answer
How much does a picnic table cost?
Picnic tables are a great addition to any outdoor space, and you can build one or buy one, or both. We took this photo of picnic tables stacked up at our local Lowe’s home center and for $88 we thought it was a great price. These tables come in a flat box so there is still some assembly required but you don’t have to cut and prepare the lumber, drill holes or buy nuts and bolts.
What is the cost of the Little Tikes picnic table?
Product Title Little Tikes Easy Store Picnic Table, Blue/Green Average rating: 4.4 out of 5 stars, based on 74 reviews 74 ratings Current Price $59.99 $ 59 . 99
How much does a good outdoor dining table cost?
While there are many dining room sets that cost more, the average price of a dining set is about $600. A set of patio furniture including a couch, chair, and side tables (much like living room furniture), will cost $400 to $2000. The reason for this large price range is the same as it is for dining room sets.
What should I use for an outdoor picnic table?
What should I use for an outdoor picnic table? Affordable Fir. Fir is the best lumber for affordable picnic tables. Man-made Composites. Treated wood is the contemporary answer to outdoor picnic tables. Functional Cedar. Cedar may be the most functional. Queen Redwood. Redwood could be considered the queen of exterior table building material.
How much does it cost to build a picnic table from scratch?
The costs depends on the type of wood, the design and the size you choose. After researching DIY forums all over the web, we found out that cheapest you can go for a DIY project is just a bit under $100 for a traditional table. That, assuming you already have the right tools at home.
How much wood is needed for a picnic table?
Allow about a foot of room for each person at the table. For example, a 10-foot picnic table would seat 10 people. Below is the lumber you'll need to build a picnic table that's 6 feet long, 30 1/4 inches tall, and 30 1/2 inches wide.
How do I make a cheap picnic table?
8:4017:29Strong and Easy Picnic Table - Free Plans - YouTubeYouTubeStart of suggested clipEnd of suggested clipThree for the top and then one bench slat over here. And then also we need these three 27 and aMoreThree for the top and then one bench slat over here. And then also we need these three 27 and a quarter inch long pieces of the two by four two by four by ten so with those cut we can start assembly.
What is the best wood to use for a picnic table?
Softwood species like Cedar, Redwood and Douglas fir are all good options that are both weather-resistant and available at most lumber yards. These are the best woods for picnic tables because they are lightweight and extremely tough.
How long does it take to build a picnic table?
With this plan, you can expect to spend 4 hours and under $100. Three steps of this picnic table plan will take you through cutting the frame parts, building the frame, and finishing the benches and top of the table.
How many 2x6 do I need for a picnic table?
Picnic Table: Shopping ListDisc.Qty.Sizetable top (2x6)18'batten (2x4)18'legs (2x6)112'seat support (2x6)110'6 more rows
What is the best way to build a picnic table?
0:117:19How to Build A Picnic Table | This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're going to put the best side of the two by eights facing down and the worst side facing up soMoreWe're going to put the best side of the two by eights facing down and the worst side facing up so now we're actually working on the underside of the table.
How do you make a picnic table from scratch?
InstructionsCut Wood Pieces. With the electric miter saw, cut the wood as follows: ... Notch and Angle Wood Pieces. Some of the wood pieces need additional angle cuts to help them rest evenly on the ground. ... Treat Cut Ends. ... Mark Lower Leg Cross Braces. ... Build Leg A-Frames. ... Attach Seats. ... Attach Picnic Table Top. ... Add Lateral Bracing.More items...•
How wide should a picnic table be?
Standard picnic tables are usually about 72 inches wide, 59 inches deep, and around 30 inches tall. The bench will typically sit at 17 inches, giving plenty of legroom beneath the table.
What wood lasts the longest outdoors?
Teak. Teak is the king of durable, outdoor woods. It's extremely rot resistant, reasonably dense and straight-grained, will not warp or crack over time, and has an attractive appearance. Teak is chiefly associated with boatbuilding.
Is Treated lumber safe for picnic tables?
So, yes, pressure treated wood is safe to use for your outdoor furniture, including picnic tables and chairs, benches, and so forth. We recommend using ACQ (alkaline copper quaternary) treated wood as it's been found to be the safest.
How big is the average picnic table?
What size is a picnic table? The length of a picnic table for six adults is about six feet. This allows each adult 24 inches of personal space. Picnic tables designed for eight adults are typically eight feet long.
What kind of wood should I use for an outdoor table top?
Cypress, redwood, and cedar are three softwoods that have natural moisture-wicking properties and make fine choices for outdoor furniture. But in our opinion, the best wood for outdoor furniture comes from top-of-the-line hardwoods such as ipe, mahogany, and teak.
How big is a standard size picnic table?
What size is a picnic table? The length of a picnic table for six adults is about six feet. This allows each adult 24 inches of personal space. Picnic tables designed for eight adults are typically eight feet long.
Is Treated lumber safe for picnic tables?
So, yes, pressure treated wood is safe to use for your outdoor furniture, including picnic tables and chairs, benches, and so forth. We recommend using ACQ (alkaline copper quaternary) treated wood as it's been found to be the safest.
How long is an average picnic table?
The standard picnic table dimensions usually have a height from the ground of about 28 to 34 inches, with most manufactured ones standing at 30 inches. A classic rectangular picnic table usually has a width range from 28 to 30 inches and 6 or 8 feet long.
How to secure a table top to a lower leg?
Simply secure them to the top with two screws and to the lower leg rail with two screws. Be careful not to penetrate the top of the table and outside of the leg rail.
Can you use a speed square to cut 45°?
An edge guide can be attached to your circular saw for rip cuts (2 rip cuts in this build) and you can use a speed square to make perfect 45° and 90° cuts instead of a miter saw. You also need a drill. Enough about the tools, lets go get some materials!
How to make a picnic table with a 10 inch seat?
Under one of the seats, add one of the 10-inch seat stabilizing braces. Run the brace perpendicular to the seat boards. Screw into place. This brace prevents the two boards from separating. Repeat for the seat on the other side of the picnic table.
Where to put table braces?
On the bottom of the tabletop , add one of the table stabilizing braces to the center of the table (running perpendicular to the two-by-sixes). Set this brace on its edge. Run screws from the top of the table down into the stabilizing brace.
Do you need to paint a picnic table?
Because the wood is pressure-treated, you don't even need to paint or stain it—leave it as-is and you're good to go.
