Can a tailgate locking assembly be repaired?
As it is not a critical component to your vehicle’s operation, the tailgate locking assembly does not have to be repaired until you are prepared to do it. The contents of your truck box will not be secured until it is fixed. “Finding a trusted mechanic at a reasonable price can be extremely difficult.
How do tailgate locks work?
Manufacturers may use a manual key-operated lock, power locking tailgate, or no locking device at all. When a tailgate lock is in place, there are mechanical components that firmly latch the tailgate handle.
Is the Dorman tailgate handle any good?
The Dorman Tailgate Handle was easy to install and is not plastic like the original equipment. I bought this for my Ranger, the price was reasonable and very easy to installed. Perfect Replacement for Tailgate Handle on my 2010 Ford Ranger that broke off.
What is the best tailgate handle for a Ford Ranger?
The Dorman Tailgate Handle was easy to install and is not plastic like the original equipment. I bought this for my Ranger, the price was reasonable and very easy to installed. Perfect Replacement for Tailgate Handle on my 2010 Ford Ranger that broke off. Easy to do, and saved a lot of time and money if went to repair shop.
What happens if the tailgate lock is faulty?
Why is the rear tailgate closed?
What is the Tailgate Locking Assembly all about?
Do auto mechanics have overhead?
Does the power lock on a tailgate lock make a buzzing sound?
About this website
How do you open a tailgate when the handle is broken?
0:441:25How to open a broken tailgate - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then yeah the next step is get a screwdriver. And all you have to do is push down on this rightMoreAnd then yeah the next step is get a screwdriver. And all you have to do is push down on this right here. And there you go you can drop the tailgate lift the tailgate and load your dogs.
How much does a tailgate cost?
Tailgates can cost anywhere from a few hundred dollars to as much as $3,600 for those with backup cameras and other accessories, according to the Detroit News. The average tailgate costs $1,200 to replace. Typically, thieves try to sell their loot on websites like Craigslist for a few hundred dollars.
How do you fix a tailgate that won't latch?
0:296:33Tailgate Won't Stay Shut? How to Fix a Stubborn Truck Tailgate! - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a few things that could be causing this the first we're going to check out the latch justMoreThere's a few things that could be causing this the first we're going to check out the latch just take a Phillips head screwdriver. And just try to latch the latch. And see if it will actually.
How do you change a tailgate rod?
0:173:05How to Replace Tailgate Latch 1999-2007 GMC Sierra - YouTubeYouTubeStart of suggested clipEnd of suggested clipBack and then you pull the rod down the rod goes up into this hole like that and then you pull itMoreBack and then you pull the rod down the rod goes up into this hole like that and then you pull it down this unlatches. And you can take your new one.
What are the parts of a tailgate?
Tailgate PartsLiftgate/Tailgate Lock.Lift Support.Tailgate.Tailgate Cable.Tailgate Handle.Tailgate Hinge Kit.Tailgate Latch.Tailgate Lift Support.
How much is GM tailgate?
The tailgate is available for $445 on the Silverado 1500 half-ton pickup.
How do you fix a tailgate on a truck?
9:1410:46EASY - Replacing a Truck Tailgate Handle - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut into it. Here where each of the little clips on the tailgate go so you can line those up and it'MoreCut into it. Here where each of the little clips on the tailgate go so you can line those up and it'll help you get everything started in the right. Direction.
How do you change a tailgate handle on a Ford f150?
2:086:25Ford F 150 Tailgate Handle Removal 2015-2017 - How to - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere we're gonna just pull out from the top kind of get in behind here. And then pull out on theMoreHere we're gonna just pull out from the top kind of get in behind here. And then pull out on the bottom and actually pull up it's going to release it from there and then you're going to have one.
How do you lubricate a tailgate handle?
Remove Tailgate outer plastic and inner metal shield panels. Using a piece of Red Scotch Brite, abrase the areas where the pushrods ride inside the pushrod guide clips. Using contact cleaner/WD40, clean out pushrod guide clips and abrased area of pushrod. Apply white lithium grease into the pushrod guide clips.
How do you fix a Ford tailgate that won't open?
3:5215:04How To Fix a Broken Tailgate That Won't Open on a 87-11 Ford Ranger.YouTubeStart of suggested clipEnd of suggested clipI might be able to unlock it unless the whole mechanism got stuck. And that's why it broke. So theMoreI might be able to unlock it unless the whole mechanism got stuck. And that's why it broke. So the way it works is you pull the door handle. You pull them in. And if this thing gets frozen.
How do you take the tailgate handle off a Chevy Silverado?
0:092:42How to Replace Tailgate Handle 1999-2006 Chevy Silverado - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you have the top broken free just go ahead and lift this straight up and draw it away go aheadMoreOnce you have the top broken free just go ahead and lift this straight up and draw it away go ahead and come in between here with a nice flathead screwdriver. Pull that clip down grab.
What is a tailgate latch?
Ideal for sealing dump body and dump trailer tailgates against the body of the vehicle. Helps prevent unintentional opening of the tailgate. Keeps mulch, dirt, loose stone, or any other messy material inside the vehicle.
How much is a MultiPro tailgate?
Owners of the base model don't have to miss out, however, because the MultiPro tailgate will be available as a $595 option. Since it launched for the 2019 Sierra, the MultiPro tailgate has been a popular option, so it's not surprising that GMC wants to expand its availability.
Can I buy the new GMC tailgate?
The latest 2021 GMC Sierra 1500 extends the availability MultiPro tailgate to the SLE and Elevation trim levels, making the feature standard across the GMC Sierra 1500 lineup, with the exception of the base-level Sierra, which now offers the feature as an available option for $595.
How much does it cost to replace a MultiPro tailgate?
GMC MultiPro™ tailgate replacement cost can be as much as $3,000 and adds downtime for your truck, and alternative tailgate sensors are expensive and require cutting and splicing.
What are college tailgates like?
A tailgate party is a social event held on and around the open tailgate of a vehicle. Tailgating, which primarily takes place in the United States and Canada, often involves consuming alcoholic beverages while barbecuing and grilling food.
How often do Tailgate Lock Cylinders need replacement?
The lock cylinders on a vehicle are designed to last the lifetime of the vehicle. But, because today's vehicles are more often locked and unlocked with a remote key fob, with the lock buttons on the door panel, or automatically when shifting into gear, the lock cylinder gets little to no use. This state of disuse often causes a lock cylinder to seize up. The tiny tumblers inside the cylinder can no longer move freely and respond to the key. Most complaints about faulty lock cylinders are caused by this situation.
How to tell if tailgate lock is faulty?
Most often, the symptom of a faulty tailgate lock cylinder is that the key will not turn or will not even insert into the hole at all. Sometimes the key gets stuck in one position or another, or it is difficult to remove. Occasionally a key is broken off inside the lock cylinder and cannot be removed. Electrical problems with the locking system are likely caused by the failure of other components.
What is a Tailgate Lock Cylinder?
A tailgate lock cylinder is usually located in the tailgate latch handle assembly. It is used to lock or unlock the tailgate on a truck manually with a key. It may also be integrated into the vehicle's central locking system. Often the lock cylinder will have a sensor attached as part of the Anti Theft system to read the key, ensuring it is being unlocked by the proper key.
How are Tailgate Lock Cylinder issues diagnosed?
To diagnose a bad tailgate lock cylinder, a technician will attempt to insert and turn the key. If the key is difficult to insert or does not turn freely, the technician may try to lubricate the cylinder and get it to free up. If this is not possible, the technician will remove the latch handle assembly from the tailgate to access the cylinder, the inside of the latch, and the connecting linkage. The goal is to rule out any other components as the cause of the problem. The lock cylinder may be removed from the latch handle assembly to observe how it operates on its own. If the rest of the system is operating properly, the lock cylinder is replaced.
Can I drive with a bad Tailgate Lock Cylinder?
A bad tailgate lock cylinder is less of a concern for driving and more of an inconvenience, especially if the tailgate is locked shut. A truck can still be driven with a bad lock cylinder. How soon the problem should be corrected is more of a personal concern and need for a tailgate lock. However, if the tailgate lock is connected to the central locking system - if it is activated with a remote key fob - symptoms of a bad lock cylinder could be related to other components, such as a faulty actuator or latch. Because components in the locking system are interrelated, a problem with one lock could affect the other locks.
How much does it cost to replace a tailgate handle?
The cost of a replacement tailgate handle varies depending on your vehicle’s year, model, and make. Aftermarket parts generally cost anywhere between $30 and $1,300. This can be sold individually or as part of a complete tailgate assembly.
What is a tailgate handle?
The tailgate handle is the external component of the tailgate’s latch assembly. Attached to the outside of the gate’s metal panel, this handle triggers the mechanism that unlatches the door and allows it to swing open. A tailgate handle is typically made of either plastic or metal.
Why is my tailgate stuck?
A faulty tailgate handle can cause your tailgate to get stuck and prevent you from laying it flat. A stuck door makes it hard to access your rear compartment and load large items onto the truck’s bed.
What is the best material to replace a tailgate handle?
But if you want a more durable and sporty-looking type of tailgate handle, you should choose a replacement that's crafted from fiberglass .
Why are my tailgate clips brittle?
Extreme heat and changing weather conditions can cause the plastic clips holding the rods inside the tailgate shell to become brittle and develop cracks. At the same time, the lack of lubrication for metal parts such as the rods and latches can cause these components to develop rust and corrode over time.
Why do trucks have tailgates?
Tailgate handles with functioning locking mechanisms help keep the contents of your vehicle safe from theft and prevent any accidents on the road. If you’re having trouble keeping your truck’s tailgate locked, its best to consult a trusted mechanic immediately.
How to lock a car with a bezel?
Always park your car on a level surface. Turn off your engine and turn your key to the lock position. Step 1: Your tailgate handle is secured in place by a bezel. Pull it off to give your hands more room to work on. Step 2: At the opposite side of your tailgate handle is the securing hardware.
How long does it take to fix a broken tailgate handle?
Afterwards, the tailgate latch is smooth as butter. The total broken tailgate handle repair time is about 15 minutes.
How many bolts are there in a tailgate latch?
There are two bolts holding the latches in place on each side. Only remove one at a time, as the tailgate cable has to be removed as well.
When reinstalling latches, do you have to make sure the rod goes above the recess?
When the latches are reinstalled, you have to make sure the rod goes above the recess for the handle, otherwise you will have to pull it out and reinstall it.
Can a truck's tailgate handle break?
This can happen on any truck, but it doesn’t have to. The tailgate handles is not the issue here, it is actually the latches themselves. There are two latches, one on either side of the tailgate. Over time, these latches get coated with dirt and rust. When the lubrication is gone and the latch sticks, the increased effort required to open the tail gate stresses the cast iron arms on the handle. Put too much stress on these arms, and they break, leaving you with a busted tailgate.
Dorman Tailgate Handle 90699
Buy Ford Ranger Tailgate Handle online and get Free Next Day Delivery on qualified purchases, or pick up your parts at a nearby AutoZone today.
Reviews
I bought this for my Ranger, the price was reasonable and very easy to installed.
What happens if the tailgate lock is faulty?
When the tailgate locking assembly is faulty, the tailgate lock cylinder with either not turn, or will turn without changing the lock position. If a power tailgate locking assembly is faulty, pressing the lock or unlock function will not change the lock position either.
Why is the rear tailgate closed?
The rear tailgate is opened and closed to check locking assembly operation
What is the Tailgate Locking Assembly all about?
A tonneau cover can be installed to cover your possessions in the truck bed, and a tailgate locking assembly can be used to lock the tailgate closed. Manufacturers may use a manual key-operated lock, power locking tailgate, or no locking device at all. When a tailgate lock is in place, there are mechanical components that firmly latch the tailgate handle. When the tailgate locking assembly is faulty, the tailgate lock cylinder with either not turn, or will turn without changing the lock position. If a power tailgate locking assembly is faulty, pressing the lock or unlock function will not change the lock position either.
Do auto mechanics have overhead?
It depends on the type of car you drive and the auto repair shop you go to. Our mechanics are mobile, which means they don't have the overhead that repair shops have. They provide you convenience by coming to your home or office.
Does the power lock on a tailgate lock make a buzzing sound?
Power lock control for the tailgate makes a buzzing sound but doesn’t lock (or unlock) the latch
