Here's a breakdown, according to HomeAdvisor
- Head: $3–$30
- Valve: $13–$150
- Backflow preventer: $125–$900
- Pipe: $0.65–$3
- Connections: $0.65–$8
- Timer: $40–$450
- Wiring (per foot): $0.50–$1.50
Full Answer
How much does sprinkler system repair cost?
The average cost of sprinkler system repairs is hard to tackle because of the scope of work. The rough estimated sprinkler system repair cost equals $120-$290 while most homeowners spend about $240. Can we help you find the sprinkler system repair services?
How much does irrigation repair cost?
Irrigation Repair Pricing. Service Fee Per Visit (Residential) $75.00. Service Fee Commercial Site Dependent. The prices listed below include all materials and labor performed after the initial Service Fee Per visit of $75. To replace (1) turf rotor. 40.00. To replace (1) 4” pop-up spray head. 25.00. To replace (1) 6” pop-up spray head.
How much does it cost to replace a sprinkler valve?
- Head: $3–$30
- Valve: $13–$150
- Backflow preventer: $125–$900
- Pipe: $0.65–$3
- Connections: $0.65–$8
- Timer: $40–$450
- Wiring (per foot): $0.50–$1.50
How much does an automatic sprinkler system cost?
Automatic sprinkler system cost. Automatic sprinkler systems cost $2,000 to $4,900 with installation for a 1/4 acre yard. Automatic systems feature a programmable controller that ensures each zone is watered for a precise length of time and at the ideal time of day: Standard controllers or timers cost $30 to $100.
Why do sprinklers need to be fixed?
Why do sprinkler heads need backflow preventers?
How much does it cost to install a sprinkler system controller?
How much does it cost to replace a sprinkler valve?
How much does it cost to fix a sprinkler system?
How much does a fire sprinkler system cost?
Why do insurance companies discount sprinkler systems?
See 4 more
About this website
How much does it cost to replace irrigation valve?
The national cost average for sprinkler repairs is between $100 and $400, with most homeowners spending around $200 to repair broken piping and 2 sprinkler heads....Sprinkler System Repair Cost by Type of Replacement.Type of ReplacementAverage Replacement CostValve Box$75 - $125Filter$75 - $150Solenoid$85 - $1507 more rows•Jun 6, 2022
How much does it cost to rewire an irrigation system?
Replacing a sprinkler system timer costs $40 to $450, plus labor. Your pro may only need to reprogram or rewire this component instead of replacing it at an average rate of $50 to $100 per hour. Putting in new wiring for the sprinkler system ranges from $0.50 to $1.50 per foot, in addition to labor charges.
How much does an irrigation system typically cost?
The average cost to install a sprinkler system is $1,800 to $5,200. New in-ground sprinkler systems cost $500 to $1,000 per zone. Lawn irrigation systems cost $6,000 to $10,000 per acre to install. A DIY home sprinkler system costs $500 to $1,500 per ¼-acre yard or $130 to $260 for small irrigation kits.
Is an irrigation system worth the cost?
If you're interested in improving the overall appearance of your home, an irrigation system will be worth your investment. With a multitude of features and benefits, irrigation systems provide the correct amount of water your landscaping needs in order to thrive.
How do you fix an irrigation line?
1:025:32How to Fix A Broken Lawn Sprinkler line - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut you could use regular hose clamps if you didn't have these on hand the one downfall of these isMoreBut you could use regular hose clamps if you didn't have these on hand the one downfall of these is that you need this special tool that helps you pinch those clamps together.
How deep are sprinkler lines buried?
In most areas, burying the pipes 8 to 12 inches below the surface is adequate. This measurement is from the top of the pipe to the surface of the soil, which means your trenches must be slightly deeper to accommodate the pipes.
Does sprinkler system increase home value?
A sprinkler system indirectly increases a home's market value by enhancing the home's overall curb appeal. Since attractive landscaping requires sufficient watering, an automatic sprinkler system ensures the protection of your investment.
How much does a sprinkler system cost for 1 acre?
According to Fixr.com, you can expect to pay an average of $2,150 per acre for a drip irrigation system with the tubing above ground, and about $3,000 per acre for a system with buried tubes, which is helpful if you'll be mowing the area where it's installed.
How hard is it to install a sprinkler system?
Installing your sprinkler system is doable if you're willing and able to put in the work and time required to do it right. However, it is one of the more challenging projects a homeowner can take on themselves. Even experienced DIYers may need a plumber or electrician to complete certain aspects.
How long does an inground sprinkler system last?
around 20 yearsHow Long Do Sprinklers Last? The average lifespan of a professional in-ground sprinkler system typically is around 20 years with consistent winterization and care.
What is the best time of year to install a sprinkler system?
Once the spring start-up season is over is the best time to install a sprinkler system. Installation can happen right through fall, until the ground freezes in late October.
Is a sprinkler system the same as an irrigation system?
When it comes down to it, there is really no difference between lawn irrigation systems and lawn sprinkler systems. Irrigation is what a sprinkler system does, meaning a sprinkler irrigates your lawn. Don't be confused when you here one vs. the other, they are exactly the same, a system to water your lawn.
Does irrigation wire need to be in conduit?
Sprinkler wire can generally be buried directly in the ground without conduit and you don't necessarily need to dig it below grade. A shallow burial is fine.
How do I know if the solenoid is bad on my sprinkler system?
Signs You Have a ProblemThe Water Won't Shut Off. If you have this problem, it's very likely the solenoid. ... Low or Uneven Water Pressure. The solenoid controls the water pressure. ... Water Leaks. There are many points in a sprinkler system that can leak. ... Current Testing. ... Valve Inspection. ... Parts Replacement.
How much does a sprinkler system cost for 1 acre?
According to Fixr.com, you can expect to pay an average of $2,150 per acre for a drip irrigation system with the tubing above ground, and about $3,000 per acre for a system with buried tubes, which is helpful if you'll be mowing the area where it's installed.
How do you replace an inground sprinkler system?
0:424:51Replace SPRINKLER HEAD in 5 Minutes - Rainbird - Hunter - OrbitYouTubeStart of suggested clipEnd of suggested clipYou don't need to go all the way down because you could actually cut the sprinkler line. And if yourMoreYou don't need to go all the way down because you could actually cut the sprinkler line. And if your knife is thick enough you can use it to pry this doughnut out or just use your hands.
How Much Does Irrigation Pipe Repairs Cost?
Sprinkler line provides the best way to keep your garden in shape. The system takes the inconvenience out of watering the garden with timers and controllers to manage the flow automatically. However, problems can develop with the sprinkler line that may have to be repaired. The system may experience head clogs, component breakdown, or pipe cracks.
The Cost of Repair by Type of System
The type of system you are planning to repair will determine the amount you will spend on repairing your sprinkler line.
The Cost by the Type of Repair
The Sprinkler system entails complex parts like heads, lines, pipes, and valves. The problem can develop with any component, and some parts are costly and time-consuming to repair.
Why do sprinklers need to be fixed?
The main reasons your sprinkler system will need to be fixed can include a damaged backflow preventer, faulty valves, broken sprayer heads, a malfunctioning sprinkler system controller, and/or broken or leaking pipes.
Why do sprinkler heads need backflow preventers?
Backflow preventers exist to stop dirty water flowing back into the main water supply from your sprinkler heads . This has to be avoided so your lawn chemicals and dirt don’t end up in your drinking water. Despite backflow preventer tests being done when the sprinkler system is installed, they can sometimes stop working in the way they should. You can’t just disconnect it because you can be fined for doing so, or your water can be disconnected to your house until it’s fixed.
How much does it cost to install a sprinkler system controller?
Installing a new sprinkler system controller and timer will cost $150 to $225 on average, plus labor. However, your technician may only need to reprogram or rewire your unit, at an average cost of $80. If wiring is an issue you can expect to pay $1 per sq. ft. including labor, and sometimes you may need to hire an electrician at $50 to $80 per hour.
How much does it cost to replace a sprinkler valve?
The cost to replace a sprinkler valve is around $65–$290 which includes labor. This could be caused by debris in the valve or a broken valve, so the valve will need to be located, possibly excavated, and cleaned out or replaced. Sometimes, valves can be rebuilt instead of replaced.
How much does it cost to fix a sprinkler system?
The average cost to repair your sprinkler system is $75–$250, with the average homeowner paying $212, which includes an hourly labor cost of about $75 by a professional plumber. Most sprinkler repairs involve replacing sprinkler heads at $5 to $20 per head, or replacing valves at $20 to $40 per valve, not including the cost of labor.
How much does a fire sprinkler system cost?
A fire sprinkler system costs $2–$7/sq. ft. to install in an existing building.
Why do insurance companies discount sprinkler systems?
Many insurance companies offer a discount by having your sprinkler system in working order—because of its ability to slow down the spread of an outdoor fire.
Does Oregon require backflow testing?
Every year, the State of Oregon requires you to perform a backflow test and it is up to the water company you are purchasing water from to enforce that test. All water companies have different rules so it is best to contact your water company to find out which devices you are responsible for testing.
Is it expensive to maintain an irrigation system?
Irrigation systems are fairly inexpensive to maintain. Just like most things, regular maintenance is required. Some you can do on your own while other maintenance requires a licensed and experienced contractor do the work.
How much does it cost to repair a sprinkler valve?
Sprinkler valve 2 repairs range from $75 to $125. Several valves throughout the sprinkler system control the flow through the pipes and to the heads. Valves can become loose and leaky over time or may get cracked or damaged. A repairman may tighten a loose valve or use plumber’s tape on minor issues, but more heavily damaged valves need replacement.
Why is a backflow preventer important?
The backflow preventer is one of the most important parts of the sprinkler system because it prevents dirty and contaminated water from flowing back in the pipes leading to your home. It protects you from dirty backflow water coming out of your kitchen and bathroom faucets.
Why is a sprinkler controller important?
The controller is critical for the system because it controls when the valves open and the sprinkler heads turn. If it stops working, the entire system becomes unreliable or inoperable. In some cases, you might think your controller is broken, but it may only need new batteries for $5 to $10.
How much does it cost to fix a sprinkler solenoid?
Repairing a sprinkler solenoid costs between $75 and $125. The sprinkler solenoid is a wire coil connected to the controller. When activated, it generates a magnetic force that controls a little plunger inside the valve so that the valve opens and plays a key part in controlling the pressure for the system. It can get blocked with sand, dirt, or even bugs, so a repairman’s first action is usually to inspect and clean the solenoid.
Why does my sprinkler make a humming noise?
This sound is often caused by an issue with the solenoid valve. The valve makes a natural humming sound when it operates from the AC current and magnetic field. If the humming is very loud, it could be an issue with the wiring, undervoltage, or loose parts.
What is the maintenance of a sprinkler system?
Basic maintenance for your sprinkler system includes cleaning the heads and valves, checking for any dirt or blockages around the heads, and observing the system to check that it is functioning correctly and the water pressure is adequate. Travel.
How much does it cost to winterize a sprinkler system?
The average cost is between $60 and $100.
What materials are needed to install a lawn irrigation system?from homewyse.com
Cost of related materials and supplies typically required to install lawn irrigation system including: connectors, fittings, fitting primer and adhesive.
What happens if a sprinkler head is broken?from houseintegrals.com
At first look, you may think a sprinkler head is broken if it is dribbling, however, this may be the result of the head being clogged, which is much less expensive than a repair. However, if it is broken, you need to get it inspected, finding a compatible head with the same flow rate as your previous one. It might be worth hiring a professional so that the head is fitted and adjusted properly.
How to save money on water bills?from houseintegrals.com
You can save money on maintenance costs by checking for and fixing those common water leaks. You can use a water meter to check for underground leaks, and also, if an area of grass is greener or muddier than the rest, this may indicate a leak. A sudden spike in your water bill may also suggest that you have a problem with your irrigation system, so hiring a professional can easily resolve this.
How to save money on irrigation system?from houseintegrals.com
You could save so much money with your irrigation system just by setting a timer for your water. You’ll need to consider the stage of your plants’ growth, exposure, weather, and seasons when deciding what setting to use. Furthermore, you may want to group similar plants with similar needs together so that your water system can cater for them all properly. You’ll need to have a more frequent setting on those hot summer days, whilst you could turn the setting off when it rains. Don’t have the sprinklers constantly working when they don’t need to be – turning them off will save you money as well as being eco-friendly.
Why is hard water bad for irrigation?from houseintegrals.com
Hard water can cause problems for your irrigation system – the high levels of limescale and salt can build up in your soil, making it hard and unsuitable for use. The salt and minerals in hard water can also clog up your irrigation system and make things difficult for plant growth. Unclogging your system can really pile up those maintenance costs, so you may want to consider an eco-friendly water softener, you can find more information about this technology from next paragraph (cost-saving technology) to address this problem.
Where to find irrigation cost calendar?from cropwatch.unl.edu
Irrigation Cost Calendar, a new online tool to calculate center pivot irrigation costs, is available at http://agecon.unl.edu/irricost. In addition to calculating your total irrigation costs, it can calculate the cost of using a pivot to irrigate a parcel on adjoining land.
Does Oregon require backflow testing?from everistirrigation.com
Every year, the State of Oregon requires you to perform a backflow test and it is up to the water company you are purchasing water from to enforce that test. All water companies have different rules so it is best to contact your water company to find out which devices you are responsible for testing.
What is drip irrigation?
Drip irrigation is a system of flexible tubing used to carry water and fertilizer through emitters, or drippers, directly to the plant base or root zone. Drip irrigation uses low-pressure and low-volume delivery, conserving water and encouraging healthy plant growth while reducing pest issues, weeds, and disease.
How much does it cost to add drip irrigation to a sprinkler system?
Adding drip irrigation to an existing sprinkler system costs $300 to $1,200 per zone, depending on whether the drip system uses existing zones or requires new zones. DIY sprinkler conversion kits cost $12 to $50. Converting zones near plants to drip irrigation minimizes disease, weed growth, and evaporation.
How much does it cost to install a drip irrigation system?
Drip irrigation system installation costs $300 to $1,200 per zone or $500 to $3,000 per acre for above ground drip lines. Subsurface irrigation costs $1,000 to $4,000 per acre and is common on farms. Installing drip irrigation to an existing sprinkler system costs $300 to $1,200 per zone.
How much water does a drip irrigation system produce?
Drip irrigation emitters produce ½ gallon to 4 gallons of water per hour directly to the soil.
Why is drip irrigation more efficient than traditional irrigation?
Drip irrigation is more efficient because it applies water directly to the plants' roots or base, result ing in little to no water loss from evaporation, wind, or runoff. Drip irrigation systems are 90% to 95% efficient, while traditional sprinklers are only 50% to 70% efficient.
How much does a lateral drip line cost?
Lateral drip irrigation pipes cost $0.10 to $0.38 per linear foot for the parts or $1.50 to $4.50 per linear foot installed. In subsurface drip irrigation, the lateral lines emit water to the plant roots.
Why are above ground drip systems more manageable than subsurface systems?
Above ground drip systems are more manageable than subsurface systems because checking lines or replacing parts requires no digging.
How much does a sprinkler system cost?
Sprinkler systems cost $500 to $1,000 per zone with installation. The average yard requires at least 3 to 5 zones. Irrigation zones are areas of the yard with different watering needs based on sun exposure and whether they feature turf, shrubs, or flower beds.
How much does it cost to install irrigation systems?
Commercial irrigation systems cost $1,000 to $7,000 per acre to install and typically include a combination of furrow, drip, and pivot irrigation. Commercial irrigation systems cost less per acre than residential irrigation systems because the price per acre drops for large-acreage projects.
How long does it take to install a sprinkler system?
Installing a sprinkler system takes 1 to 3 days on average, depending on the yard size and number of zones.
What is an in ground sprinkler system?
In-ground sprinkler systems are the most common and feature sprinkler heads connected to underground pipes.
How many sprinkler heads can be in one zone?
Never put different sprinkler head types in the same irrigation zone. They have different flow rates and water application rates. A single zone may support 1 to 9 sprinkler heads, depending on the water pressure, flow rate, and type of heads.
How much does an in ground sprinkler system increase the value of a home?
A well-maintained lawn with an in-ground sprinkler system increases a home's property value by 7% to 15% on average. An automated sprinkler system maintains curb appeal and conveys convenience to potential home buyers.
How much does it cost to add a sprinkler zone?
Cost to add a sprinkler zone. The cost to add a zone to an existing sprinkler system is $300 to $700, depending on the zone type, sprinkler head type, and site conditions. Adding a sprinkler zone requires installing a new valve and may require upgrading the controller.
How much does it cost to install a sprinkler system?
Most homeowners spend between $2,900 and $4,500 to have a sprinkler system installed, with the average cost being $3,700. To get a better understanding on how lawn care contractors price your irrigation system is they normally do it in square footage and per zones.
How much does a sprinkler cost?
For example, if you lawn size to be irrigated was roughly 8,000 square ft. Using our sprinkler calculator above would cost you about: $2480.00 – $4800.00
Is it expensive to install a sprinkler system?
Like any home improvement, the cost to install a sprinkler system would seem pricey. However, having an irrigation system will evenly distribute water across your lawn. Furthermore, being able to set each zone on a timer, you will be able to conserve water effectively.
When to get prices in winter?
Try to get prices in late winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season.
Why do sprinklers need to be fixed?
The main reasons your sprinkler system will need to be fixed can include a damaged backflow preventer, faulty valves, broken sprayer heads, a malfunctioning sprinkler system controller, and/or broken or leaking pipes.
Why do sprinkler heads need backflow preventers?
Backflow preventers exist to stop dirty water flowing back into the main water supply from your sprinkler heads . This has to be avoided so your lawn chemicals and dirt don’t end up in your drinking water. Despite backflow preventer tests being done when the sprinkler system is installed, they can sometimes stop working in the way they should. You can’t just disconnect it because you can be fined for doing so, or your water can be disconnected to your house until it’s fixed.
How much does it cost to install a sprinkler system controller?
Installing a new sprinkler system controller and timer will cost $150 to $225 on average, plus labor. However, your technician may only need to reprogram or rewire your unit, at an average cost of $80. If wiring is an issue you can expect to pay $1 per sq. ft. including labor, and sometimes you may need to hire an electrician at $50 to $80 per hour.
How much does it cost to replace a sprinkler valve?
The cost to replace a sprinkler valve is around $65–$290 which includes labor. This could be caused by debris in the valve or a broken valve, so the valve will need to be located, possibly excavated, and cleaned out or replaced. Sometimes, valves can be rebuilt instead of replaced.
How much does it cost to fix a sprinkler system?
The average cost to repair your sprinkler system is $75–$250, with the average homeowner paying $212, which includes an hourly labor cost of about $75 by a professional plumber. Most sprinkler repairs involve replacing sprinkler heads at $5 to $20 per head, or replacing valves at $20 to $40 per valve, not including the cost of labor.
How much does a fire sprinkler system cost?
A fire sprinkler system costs $2–$7/sq. ft. to install in an existing building.
Why do insurance companies discount sprinkler systems?
Many insurance companies offer a discount by having your sprinkler system in working order—because of its ability to slow down the spread of an outdoor fire.
