How much does deck power washing cost?
Prices depend on the type of stain, and whether the entire deck or if just the flats need new stain. Power washing a deck costs $0.35 to $0.77 per square foot to remove dirt, debris, flaking stain, sealer, and stains. Renting a power washer costs $38 per day with a $50 deposit, while buying one costs $200 to $400 on average.
When is the best time to power wash your deck?
Instructions
- Select a Tip and Pressure Setting. Use the lowest possible pressure that is still effective. ...
- Test the Pressure Washer Settings. Using a pressure washer takes a little practice. ...
- Power Wash the Deck. ...
- Apply a Chemical Stripper/Brightener (Optional)
How to wash your deck without a power washer?
DIY Deck Cleaning Solution
- 1 cup oxygen bleach
- 2 gallons hot water
- Scrub brush
- Bucket
How much does a deck really cost?
The cost of a deck installation will vary but generally ranges from $2,800 to $6,500. You may also want to consider the cost of railing, which can add about $19 per linear foot. If you’d like a fire pit, it can cost anywhere from $200 to $500.
How much water does a pressure washer use?
Why pressure wash a deck?
How much does it cost to clean a 500 square foot deck?
Is it too much pressure to remove grease stains from concrete?
Is a pressure washer cheap?
Should I replace deck railings?
See more
How much does it cost to powerwash a 12x12 deck?
The average cost to power wash, stain, and seal a deck is $1.57 to $4.04 per square foot. A 12x12 deck costs $226 to $582 to stain when paying someone, or $59 to $176 to stain it yourself.
How much should I charge to power wash and stain a deck?
The average cost to power wash and stain a deck is $2.15 to $4.25 per square foot. Deck painting cost is slightly lower. Total cost is $415 to $925 for decks of average size when a contractor is hired to do the work.
How much does it cost to powerwash a deck per square foot?
The average cost to power wash a deck ranges from $119 to $244 with most homeowners paying around $0.35 per square foot. To power wash, stain, and seal your deck, expect to spend between $0.50 and $1.50 per sq. ft. or $0.95 per sq. ft.
How much does deck Cleaner cost?
Homeowners typically pay about $195 for having a 500 square foot deck cleaned by a professional with a power washer. Decks with rails, stairs and other complexities cost closer to $240. Other factors are listed below.
How long should it take to pressure wash a deck?
You can use a brush to deal with stubborn spots. After 15 minutes you can now use the pressure cleaner with the 25-degree nozzle to give the deck a final wash. Removing all the stains and the remaining brightener detergent in an even sweeping motion.
How much should I pay to have my deck stained?
Average Cost to Stain a Deck The cost to stain your deck typically ranges from $540 to $1,050, with an average of just over $700. This equates to an average cost of $2 to $4 per square foot for labor and materials. Higher-quality stains will run up the price, as will washing or sealing the wood prior to staining.
How do you quote a pressure washing job?
So, when estimating your prices or preparing to give a quote to a client, don't shy away from charging what you think your skills are worth. Pressure and power washing typically costs $50 to $200 per hour, and it usually takes a professional 2.3 hours on average to power wash a house and siding.
How much does it cost to paint a 12x12 deck?
The cost to paint a deck ranges from $600 to $1,500 or about $2 to $5 per square foot.
How do you power wash a wood deck?
0:482:08How to Properly Pressure Wash a Deck - Mi-T-M 2022 - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe key is to use a sweeping motion along the grain of the wood and to keep the nozzle moving at allMoreThe key is to use a sweeping motion along the grain of the wood and to keep the nozzle moving at all times pull the trigger at the beginning of your first pass directing.
Should you power wash a deck?
If you have timber deck boards, a power washer's pressure may cause splintering and damage to the timber fibers. If the timber surface already has some splintering, pressure washing will only exacerbate the issue.
Should a deck be power washed before staining?
There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.
How do I clean my deck without a pressure washer?
0:051:31How to Clean Your Deck Without Using a Pressure Washer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlong with a little more soaking time. If the cleaner is evaporating. Too quickly just re wet theMoreAlong with a little more soaking time. If the cleaner is evaporating. Too quickly just re wet the surface with additional cleaner to keep it active. And working. Once you see your desired.
How do I bid a stain job?
7:0521:33How to Bid a Job: A Contractor Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's time to quote your staining. And for us fence staining is very basic we do it by the squareMoreIt's time to quote your staining. And for us fence staining is very basic we do it by the square foot if we're talking to a fence contractor we're gonna talk in the in the linear foot language.
How much does it cost to stain a 10 x10 deck?
A 10'x10' deck covers 100 square feet, with a typical staining cost of $300. A 12'x12' deck covers 144 square feet, costing an average of $432. 8'x10' works out at 80 square feet, with a final cost of $240. A deck measuring 10'x20' covers 200 square feet for a typical cost of $600.
How much does it cost to paint a 12x12 deck?
The cost to paint a deck ranges from $600 to $1,500 or about $2 to $5 per square foot.
What's the labor cost to paint a deck?
On average, one can expect to pay between $2 and $5 per square foot when painting a deck.
How much water does a pressure washer use?
Washing a 500 square foot deck takes about two hours – so 350 to 480 gallons of water.
Why pressure wash a deck?
More importantly for wood decks, it cleans away dirt that would otherwise prevent stain and sealer from seeping into the wood to protect it and improve its longevity.
How much does it cost to clean a 500 square foot deck?
Homeowners typically pay about $195 for having a 500 square foot deck cleaned by a professional with a power washer. Decks with rails, stairs and other complexities cost closer to $240. Other factors are listed below.
Is it too much pressure to remove grease stains from concrete?
For example, the pressure required to remove grease stains from concrete might be too much for a wood deck – etching it and damaging its looks while shortening its lifespan, the very opposite of what was intended .
Is a pressure washer cheap?
While a good pressure washer isn’t cheap, it will pay for itself over time as you use it to pressure wash your driveway, siding, roof and more – even keeping the vehicles clean. Most have adjustable pressure settings and nozzle options to customize pressure to the job.
Should I replace deck railings?
If your deck railing is older and looking its age, replacing deck railing might be a better way to spend your money than trying to restore its once-good looks. Stairs – Like railing, stairs take a little more time per square foot than flat decking, so cost rises.
How much does a pressure washer cost?
Professional pressure washers charge $50 to $150 per hour. Typically, they charge by the sq.ft., but they will charge by the hour occasionally. You can hire a professional pressure washer to quickly and thoroughly clean your deck. They will use the high-pressure water stream produced by the washer to quickly break down dirt, mildew, and grime from the deck’s surface. For heavily soiled areas, they might opt to put detergent in the machine and give the surface a light scrubbing. For a 500 sq.ft. deck, it will take about an hour to two hours to clean.
How does pressure washing a deck work?
Deck pressure washing uses a strong stream of water to break away and remove dirt, grease, mold buildup, and grime from a deck to thoroughly clean the surface. It revitalizes the deck’s appearance and prepares it for possible staining or painting.
How much does it cost to pressure wash an aluminum deck?
The cost to pressure wash an aluminum deck averages $150 to $180. Power washing easily restores the appearance of an aluminum deck. It lifts away dirt and mildew with ease, especially when used in combination with a detergent. Also, aluminum decking stands up well to high pressure without sustaining damage. Since aluminum decking can handle hard cleaning, it takes less time because you can scrub the surface and hit it with a heavy stream of water. With less time required, it tends to cost less to clean.
Why is it so expensive to power wash composite decking?
Composite decking is the most expensive of all decking materials to pressure wash because it requires light scrubbing throughout and a low-pressure water stream to clean the surface gently.
How much does a pergola cost?
If you want to build a deck pergola before pressure washing the deck, then the average cost of a pergola is $3,500 when constructed from cedar wood that measures 10 ft. A pergola is a nice addition to any deck. It provides shade and protection from the sun’s harmful UV rays, which can rapidly break down decking material as the years pass. The pergola creates a nice, shaded area to sit on the deck. Some people use a pergola to support plants, such as vines or hanging plant baskets to add visual interest to the deck area.
How does a pressure washer affect composite decking?
The powerful burst of water from the pressure washer can leave grooves in wood and composite decking if you use a pressure that is too high. Composite decking will actually start to chip under the water’s onslaught. Wood pieces can also break away and, in extreme cases, the boards can even start to crack. Areas of the wood that have already started to split from age and use will become worse as the water divides the broken area further. If the psi is set too high then the water stream can damage wood and composite material by chipping and peeling the surface. If the decking is painted and the psi is too high then the water will peel away the painted surface of the deck.
How much pressure does a pressure washer generate?
They consist of a motor, pump, and a highly concentrated nozzle that increases the water’s pressure by 30 to 80 times as it leaves the house. Most pressure washers easily generate from 1,500 to 4,000 psi.
How long does it take to stain a deck?
The average time it takes to stain a deck is 4 hours per 100 square feet. Staining a deck takes two-days. The first day is moving furniture, stripping, power washing, sanding, and repairs, while the second day is applying stain and sealer. An average deck takes 10 to 15 hours of labor.
What is the best stain for a deck?
Deck stains are water or oil-based and come in a variety of different types. Transparent or clear stains provide a natural wooden look and work best for decks in excellent condition. Solid stains look similar to paint and help conceal flaws in older wood. A semi-transparent stain partially highlights the wood grain with added gloss.
How many square feet does a gallon of stain cover?
One gallon of stain covers approximately 200 to 300 square feet. Enter the dimensions of your deck in feet to calculate the cost to stain your deck and the gallons of stain needed.
How much does a deck stripper cost?
Deck Stripper – Deck stripper is used to remove existing stain and sealer and to clean the wood of dirt and blemishes. Deck stripper costs $20 to $80 per gallon, which covers 150 to 200 square feet.
How much does it cost to sand a deck before staining?
The cost to sand a deck before staining is $30 to $50 per hour and takes 3 to 10 hours, depending on the surface area. Decks in great condition only a light sanding with an orbital floor sander. A heavier sanding is necessary if the wood is warped or has water damage.
How much does it cost to stain a deck?
The cost to pay someone to stain a deck ranges from $0.50 to $5.50 per square foot depending on the condition of the wood, if the deck has railings, and whether power washing, sanding, and stripping are required.
Is it better to stain or paint a deck?
Staining a deck is better than painting because it penetrates deeper into the wood for superior resistance to mold, mildew, and rot. Deck stain is less slippery, repels water, protects from UV rays, and easier to clean. Solid deck stain looks like paint and comes in various colors. Hire a deck staining pro near you.
How long do wooden decks last?
When they’re well-cared-for, wooden decks can last for many years. The International Association of Certified Home Inspectors explains that wooden deck planks can last for 15 years. However, dirt, discoloration and surface mold can ruin the appearance of a wood deck and shorten its lifespan.
How do I clean a deck without etching?
To clean a deck without causing etching or other damage, the power washer must be operated at the correct pressure setting. Soft woods, like pine, require a much lower pressure setting than harder woods. Power washers can also cause injuries, so operators must wear personal protective equipment and work carefully.
How much does it cost to power wash a deck in 98102?
For your project in zip code 98102 with these options, the cost to power wash deck starts at $0.48-$0.59 per square foot. Your actual price will depend on job size, conditions, finish options you choose.
What is advanced professional handyman?
At Advanced Professional Handyman, our mission is the same as yours - making your home a great place to live. As one of Washington state's leading home improvement specialists, you can rest easy knowing your home repair or remodeling job is in experienced hands.
Can you power wash a deck?
For best results, furniture and other items must be removed from the deck before power washing. The deck should then be swept to remove leaves, twigs and other loose material. If any debris is caught between the boards of the deck, it can be removed with a putty knife or similar tool. If the deck is heavily soiled, it may also be necessary to apply a deck cleaner to help loosen dirt.
Is Konsker Electric family owned?
Konsker Electric is family owned and has been in business for over 80 years. We are experienced in Residential, Commercial, and Industrial installations, as well as Communications and Home Theater. Whether it's New Construction, Remodels, Service and Repair, or Alternative Energy conversions, we lo ... Read more
What is the difference between power washing and pressure washing?
Both power washers and pressure washers use strong streams of high-pressure water to clean surfaces, but power washing has the added element of hot water instead of cold. Soft washing is another type of cleaning that uses eco-friendly cleaning products and water at low pressure.
How much does it cost to power wash vinyl siding?
For a single-story home with vinyl siding, power washing rates range from $90 to $248 depending on the size of your home. Contractors typically charge $0.29 to $0.35 per square foot, and prices go up if there are more than one-story, because more pressure is needed if ladders aren’t used. A pressure washer brush helps to clean the surface of debris faster.
How much does it cost to clean a driveway?
In some cases, the driveway will need to be scrubbed by hand first with a bleach solution to get rid of built-up mold and mildew, costing $0.40–$1.25 per square foot. Putting bleach in a pressure washer will break it.
How much does it cost to pressure wash a house?
Pressure washing prices per hour range from $50 to $200 with most homeowners spending $130 to $160 per hour on average. It takes a professional 2.3 hours on average to power wash a house and siding. Pricing depends on the degree of safety precautions required for the job (such as a steep roof).
How much does pressure washing cost?
Pressure washing takes longer, and it costs $0.08–$0.20 per square foot.
How much does it cost to rent a pressure washer?
The cost to rent a pressure washer ranges from $76 to $180 per day with most spending between $90 and $120 per day depending on the size and whether its gas or electric.
How much does a cedar shake roof cost?
A cedar shake roof can be pressure washed for $0.60 to $0.90 per square foot or $400 to $800 per roof, while a composition roof will be less at $0.10 to $0.30 per square foot. The pitch of your roof will also affect the cost—a steep pitch can add another $0.10 per square foot to the price.
1. Select the right power washer
To clean a deck, some homeowners choose a washer with a pressure range of 1,300 to 2,400 psi, the same as washing a car. HGTV recommends working with the lowest pressure that cleans your deck materials gently: about 500 to 600 psi for soft woods like cedar or pine, and up to 1200 to 1500 psi for pressure-treated wood.
2. Use a deck brush to pre-treat the surface
Before you put that power washer to use, see what you can achieve with some suds and water. Amabile recommends pre-treating your deck by applying a mixture of water and mild dish detergent or non-toxic oxygen bleach with a deck brush, he says.
3. Practice using the equipment
Check the instructions included with your power washing equipment, and practice using it on an inconspicuous area, such as a stair tread, at low pressure. If you’ve never used this type of equipment before, you can easily score concrete if you don’t know what you’re doing, Amabile says. “You could even damage a house, especially if it’s stucco.
4. Prep the area
Before you begin power washing, cover any electrical components, light fixtures, and nearby plants, Lowe’s recommends. (The water won’t hurt the plants, but the pressure might.)
5. Work systematically
OK, you’ve got the right power washer, pre-treated the deck with a soap and water solution, protected the surrounding area, and you’re ready to get down to business. As you pressure wash, keep the nozzle at least 12 to 18 inches away from the surface, and spray the water in even strokes in the same direction as the wood grain, Amabile says.
6. Let dry for a few days before any staining
Let the deck dry for two to three days before applying any stain, if possible. “Wood has pores, like concrete or our hands,” Amabile says. If you don’t let the deck dry adequately before staining it, the water that the deck absorbed will push up the stain in about a week.
Not comfortable power washing? Consider these alternatives
If you’re not confident about using a power washer, you have other options:
How much does it cost to power wash a deck?
The average cost to power wash and stain a deck is $2.15 to $4.25 per square foot. Deck painting cost is slightly lower. Total cost is $415 to $925 for decks of average size when a contractor is hired to do the work.
What happens if a deck is failing?
If a large section of the deck is failing and repair costs amount to a third or more of the cost of a new deck, then replacement should be considered. After all , the remaining areas of the deck will continue to age, and the process seems to speed up as the years go by.
How much water does it take to pressure wash a deck?
Water Rates – If you have metered water, consider the 350 to 500 gallons of water it takes to wash average-size decks. Who Does the Work – You’ll save on labor costs if you pressure wash and clean your deck, though if you have to rent equipment, some of the savings will be lost.
Can you repair a deck that fell on a turkey fryer?
If the deck is generally in good condition but a limb fell on it or the turkey fryer got out of control, then repair is probably the cost-effective choice. Just consider whether you’ll be OK with the different looks of materials of different ages, especially if it is wood. The age and overall condition of the deck.
How much water does a pressure washer use?
Washing a 500 square foot deck takes about two hours – so 350 to 480 gallons of water.
Why pressure wash a deck?
More importantly for wood decks, it cleans away dirt that would otherwise prevent stain and sealer from seeping into the wood to protect it and improve its longevity.
How much does it cost to clean a 500 square foot deck?
Homeowners typically pay about $195 for having a 500 square foot deck cleaned by a professional with a power washer. Decks with rails, stairs and other complexities cost closer to $240. Other factors are listed below.
Is it too much pressure to remove grease stains from concrete?
For example, the pressure required to remove grease stains from concrete might be too much for a wood deck – etching it and damaging its looks while shortening its lifespan, the very opposite of what was intended .
Is a pressure washer cheap?
While a good pressure washer isn’t cheap, it will pay for itself over time as you use it to pressure wash your driveway, siding, roof and more – even keeping the vehicles clean. Most have adjustable pressure settings and nozzle options to customize pressure to the job.
Should I replace deck railings?
If your deck railing is older and looking its age, replacing deck railing might be a better way to spend your money than trying to restore its once-good looks. Stairs – Like railing, stairs take a little more time per square foot than flat decking, so cost rises.
