Highlights
- A baseboard heater itself can cost between $25 and $250, not including labor.
- Because this is not DIY-able, you’ll need to budget $75 to $250 per hour for installation.
- to purchase and install a baseboard heater, you should budget $300 to $500 each.
- Your overall project cost will depend on the unit type and the number of units needed.
How much does it cost to replace a baseboard heater?
You can expect your pro to charge around $65 and $85 per hour. Baseboard heaters are simple systems. This can make replacing the entire unit easier than repairing broken components. The installation of a new heater can cost between $350 and $1,100.
How do you wire an electric baseboard heater?
Things You'll Need
- Deep electrical box (or 4 inch square box and a single device ring) for each thermostat.
- 12 or 14 gauge 2 wire and ground cable (often called "12/2 or 14/2 with Ground" romex)
- Snake or fish tape
- Electric baseboard heaters
- 2 Pole line voltage thermostat
- Cable connectors
- Wirenuts
What are the most efficient electric baseboard heaters?
- Infrared Heaters – the lowest wattage per heat provided makes these the cheapest to run.
- Oil-Filled Heaters – their long-lasting heat makes the most out of the electricity.
- Storage Heaters – saves in running costs by using off-peak electricity tariffs.
How to wire your baseboard heater?
How do you wire a 240 volt baseboard heater? Instructions Install a Wall Box for the Thermostat. Make a cutout for the line-voltage thermostat and install a wall box. Run Cable for the Circuit. Mount the Baseboard Heater. Make the Wire Connections at the Heater. Make the Wire Connections at the Thermostat. Connect the Circuit Breaker. Test the Heater.
How much does it cost to heat a house with baseboards?
How long does it take to install a baseboard heater?
What Size Electric Baseboard Heater Do I Need?
How much does it cost to install an electric heater?
How much does a 120 volt heater cost?
How many square feet does an electric baseboard heater cover?
Why is my baseboard heater dusty?
See 2 more
How much does it cost to get a baseboard heater installed?
Cost to install a baseboard heating system According to American home repair website Homewyse, the typical installation costs between $400 and $800 per unit.
How much does it cost to switch to baseboard heating?
A baseboard heater itself can cost between $25 and $250, not including labor. Because this is not DIY-able, you'll need to budget $75 to $250 per hour for installation. to purchase and install a baseboard heater, you should budget $300 to $500 each.
Are baseboard heaters worth it?
On a technical level, yes, baseboard heaters are efficient in that they convert all incoming energy into heat. This specific system also typically warms your home in zones, meaning that you can control different rooms of your home with different thermostats—definitely a checkmark on the energy-efficient list.
Are baseboard heaters easy to install?
Simple Installation Because there is no ductwork involved in electric baseboard heating, it's easier — and cheaper — to install than other types of heating.
Do you need an electrician to install a baseboard heater?
Because of all this, installing baseboard heaters is quite an advanced project, so it is generally done by a licensed electrician who will follow a typical sequence of work, from planning to the final hookup of the circuit.
Is baseboard heat better than forced air?
Baseboard heating is great for delivering consistent heat in a room, while forced air works best when heating the entire home. However, forced air heating will warm up a room faster. Installation costs favor baseboard heating, but forced air heating is more cost-efficient for large spaces.
What's more efficient than baseboard heaters?
While ductless heat pumps do work best with proper insulation, they can do more than baseboard heat in a room if it's less than optimal. They are more energy efficient than baseboard heaters – in fact, they are considered one of the most energy-efficient heaters on the market today.
Can you leave baseboard heaters on all the time?
Yes, while baseboard heaters are considered very safe, and the risk of fire is pretty low if misused, there is a risk of fire. Here are some safety and maintenance tips for preventing fire and to maximize the heating capabilities in a room. Don't Block the Airflow.
What can I use instead of baseboard heaters?
Here are a few alternative options to a baseboard heating system that may be right for you.Ductless Heat Pumps. One of the most popular alternatives to baseboard heating is a ductless heat pump. ... Solar Heat. ... High-Efficiency Furnace. ... Wood Heating. ... Heat Pumps.
Can you put furniture against a baseboard heater?
Space in Front of Baseboard Heaters You can place a couch or chair in front of a heater, but it must be at least a foot away. Placing furniture closer than that creates a potential fire hazard, and it can greatly diminish the heater's performance by restricting airflow to and from the heater.
Is a space heater cheaper than baseboard heat?
Space heaters are cheaper to buy, usually costing from $25 to $100. They're only cheaper to use, however, if you're using them to heat a small area or to supplement heat in one room. Space heaters are not as efficient as baseboard heaters and should never be used as a main heat source.
Are newer baseboard heaters more efficient?
Q: Are new baseboard heaters more efficient? Since all-electric baseboard heaters convert 100 percent of the electricity they use into heat, purchasing a newer baseboard heater won't make it more efficient than an older one.
How much does it cost to switch from radiators to forced air?
The total cost? It is in the neighborhood of $18,000 for the entire scope of work depending on the size of your home.
How do you replace a wall heater with a baseboard heater?
0:114:23How to upgrade from a baseboard to a wall heater | Cadet Heat - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe green ground screw and remove the bare copper ground wire unscrew and remove mounting screwsMoreThe green ground screw and remove the bare copper ground wire unscrew and remove mounting screws that hold the baseboard to the wall if your heater had a strain relief connector.
Is hot water baseboard heating expensive?
Baseboard heating is less expensive to install than many other types of heating systems since they are so easy to install. So if you're hoping to get heating in your home on a lower budget, then baseboard heating might be perfect for you.
Can baseboard heat go through central air?
If you have a baseboard heated house, adding central air is a great idea for your comfort alone. To make it even more worthwhile, though, is understanding that it can also save you both energy and money.
Are electric baseboard heaters safe?
When installed correctly, electric baseboard heaters are relatively safe. There is no flame involved, and the unit does not release any type of car...
Is electric baseboard heat efficient?
All the electricity that a baseboard heater uses is used to create heat. They are very energy efficient for heating small spaces or as a backup hea...
Which type of heater is the cheapest to run?
Infrared heaters are very cheap to run but are a zone type heater. An energy-efficient HVAC unit is the least expensive to run and provides warmth...
What is the most energy-efficient electric baseboard heater?
A 240-volt hydronic electric baseboard heater is the most energy-efficient. However, most people purchase a convection unit as they are less expens...
What is the average cost of electric baseboard heat?
To run an electric baseboard heater averages $0.08 to $0.20 per hour in energy consumption. Many things affect energy efficiency, including the wat...
Are new electric baseboard heaters more energy efficient?
As the baseboard heater ages, it loses three to seven percent transmission, so a new heater is more energy-efficient. Also, if an older unit is kep...
How much does it cost to install electric baseboard heaters?
The average cost to install an electric baseboard heater is $550 for the heater and labor. This is for a 72-inch, 1500-watt, 240-volt electric base...
How much does it cost to install an electric heating system?
The average cost to install a central electric heating unit is $6,500 to $9,700. These systems require ductwork, an outside fan unit, an indoor uni...
Is electric heat expensive?
Electric heat can be more expensive than gas, oil, or propane. The cost of electricity varies from state to state. However, several factors determi...
What size electric baseboard heater do I need?
The answer depends on the size of the room. For instance, a 500 square foot room needs a 4,500-watt unit to provide the needed heat. If you have a...
2022 Cost of an Electric Baseboard Heater - Estimates and Prices Paid
How much an electric baseboard heater should cost. Average costs and comments from CostHelper's team of professional journalists and community of users. An electric baseboard heater costs $25-$200 per unit, depending on options such as a programmable thermostat or hydronics (running the heating element through a closed-loop heat-transfer liquid for a more lasting warmth).
Homewyse Calculator: Cost to Install Baseboard Heater
Unit Costs: How Pros Price. Unlike other websites that publish pricing from unrelated jobs in the past, Homewyse creates up-to-date estimates from current Unit Costs.The Unit Cost method delivers high accuracy by using location, details and options for the unique requirements of each job. Contracting, trade, design and maintenance businesses rely on the Unit Cost method for transparency ...
How Much Does Electric Baseboard Heat Cost Per Month?
A typical 12000 Watts baseboard heater costs an average of $1.67 per hour to run. If the electric baseboard heater is used for 8 hours per day, it costs $13.33.
Cost to Install an Electric Baseboard Heater - Homewyse
Unit Costs: How Pros Price. Unlike other websites that publish pricing from unrelated jobs in the past, Homewyse creates up-to-date estimates from current Unit Costs.The Unit Cost method delivers high accuracy by using location, details and options for the unique requirements of each job. Contracting, trade, design and maintenance businesses rely on the Unit Cost method for transparency ...
How Much Does It Cost to Install Electric Baseboard Heaters?
T he typical cost to install electric baseboard heaters is $784.Depending on the specifics of your project, you can expect to pay anywhere from from $379 to $1,213.Ultimately, what you’ll pay will depend on the price of materials, the kind of electric heater—wall or baseboard—and just how cozy and warm you want your home to be.
How much does it cost to heat a house with baseboards?
The average national cost to install a 72-inch, 1500-watt, 240-volt electric baseboard heater is $550.
How long does it take to install a baseboard heater?
It takes about 5 hours ( $250 to $400) to install an electric baseboard heater.
What Size Electric Baseboard Heater Do I Need?
Electric baseboard heaters come in a wide variety of sizes and wattages. Typically, the size area covered is based on the wattage and amps of the heater. However, if you have an area that is being supplemented by an electric baseboard heater, you may be concerned with the size of the heater itself. For instance, if you are trying to heat areas around windows, doors, or outside walls, measuring the area where you want the heat concentrated is the best course of action.
How much does it cost to install an electric heater?
Installation normally involves affixing the heater to the wall, hooking up a thermostat 1 (if the baseboard runs on a wall thermostat instead of internal control), and plugging the unit into an electrical outlet. It takes about 5 hours ( $200 to $600) to install an electric unit. Electricians charge between $40 and $120 an hour in addition to supplies and any extra wiring that may need to be done. However, the price does not include the cost of the unit.
How much does a 120 volt heater cost?
A 120-volt heater averages $50 to $120, depending on the wattage. A 240-volt heater ranges from $100 to $300 depending on the watts and requires an electrician’s skills to install it. The cost varies depending on the number of baseboard units being installed. Large rooms may need more than one heater.
How many square feet does an electric baseboard heater cover?
So, part of determining how many units you need requires you to know how many square feet one electric unit covers. Most manufacturers recommend slightly oversizing for safety reasons. We will assume that each heater will be at 1350 watts and 240 volts as this is adequate to cover 150 square feet.
Why is my baseboard heater dusty?
No appliance works well if it is dusty. Dust is a known blocking agent for any type of air, whether it is warm or cold. Also, dust creates allergens that can affect asthma too . Keeping your electric baseboard heater clean and free from dust enhances its ability to last a long time and be energy efficient. A heater that has to work harder to push the heat into the room due to dirt build up will break down more easily and require more repairs.
How much does it cost to install a baseboard heater?
The average cost to install electric baseboard heaters is $780. The typical cost to install electric baseboard heaters is $390 to $1,190, with an average cost of $780. If you don’t include labor, you can expect to pay between $25 and $200 for a baseboard heater and between $60 and $120 for an electric wall heater.
How much does an electric baseboard heater cost?
The average cost of an electric baseboard heater is anywhere from $25 to $200 . If you take an average cost of $900.00 (heater and labor included), your budget options may include: If you need more units than your budget allows, you may have to choose a less expensive electric heater model. However, if the total number of units ends up being less ...
What Factors Influence the Cost to Install a Baseboard Heater?
There are several factors that go into installing a baseboard heater. With proper installation, you’ll enjoy years of toasty warm heat on cold winter nights.
Can I replace an electric baseboard heater?
You can replace an electric baseboard heater by turning off all the power to the heater at your fuse box. Remove the old unit, which can be a bit tricky depending on the original installation. Set the baseboard heater on the floor in front of where you want it installed. Wire the new unit the same way the old unit was wired and mount to the wall. To save you a few headaches and ensure all safety precautions are taken, you may want to hire a professional to install your new unit (s).
Can electric baseboard heaters save on energy costs?
Yes. Electric baseboard heaters can save on your energy costs. Some systems, like forced air systems, are less expensive than electric baseboard heat. A 2000-watt baseboard heater can warm 200-square feet of space in about 15 minutes.
Do electric baseboard heaters require regular maintenance?
Baseboard heaters have no moving parts and require less maintenance than some other heating systems. But it would be best if you periodically cleaned your units to boost your electric baseboard heater's efficiency. Remove the front panel cover and vacuum dirt and dust from the metal fins. Or, you can use a bristle brush or damp rag. Make sure the unit is off to prevent burns before you clean your heaters.
How Much Does It Cost to Install an Electric Heater Per Unit?
The national average price for labor to install an electric baseboard or wall heater is between $75 and $250 per hour. What you pay may be higher or lower depending on several factors.
When to get contractor pricing?
Try to get prices in late Fall, early winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season.
Do you have to have a copy of the manufacturer's installation requirements for baseboard heaters?
Be sure to have a copy of the Baseboard Heaters Manufacturer’ s recommended installation requirements before starting, to make sure your project doesn’t end up costing you more money in the long-run.
Do I need to hire a contractor to install baseboard heaters?
I would strongly recommend you hire a licensed and Insured Baseboard Heaters HVAC contractor to perform the installation for you.
How much does an oil baseboard heater cost?
This option is only recommended if you're only able to heat your home using oil rather than gas or electricity. An oil-filled baseboard heater typically costs between $200 and $250 on average.
How much does it cost to install a baseboard heater in 98102?
For your project in zip code 98102 with these options, the cost to install a baseboard heater starts at $304.92-$524.78 per heater. Your actual price will depend on job size, conditions, finish options you choose.
Why is baseboard heater quieter than wall heater?
Baseboard heat is quieter than wall heaters because they don't require any moving parts to operate. When a wall heater is off, it's relatively quiet however when you turn it on the fan can produce a slight noise similar to that of a refrigerator.
Why use a baseboard heater?
First, a baseboard heater can be a supplement to a whole-home heating system to keep specific rooms warmer. For example, baseboard heat in a bathroom can make it more pleasant whenever you get out of the shower during the cold winter months. Wall heaters are designed to heat an entire room but they can also be enough to keep your whole house warm, depending on the size. The cost of a baseboard and wall heater is similar in terms of the price per unit, but it could cost more if you need several baseboard units installed as opposed to a single wall heater. Here are some other things to consider when deciding between a baseboard or a wall heater:
What is baseboard heating?
Baseboard heating is a zoned heating system, so you can get heat in specific rooms wherever you need it. This option is ideal for families who prefer different levels of heat during the winter. You can set the baseboard heating to a certain temperature in one room, and a different temperature in another for versatility and more control.
How do wall heaters work?
Wall heaters are able to heat up rooms quickly by using fans to circulate the air. Baseboard heaters rely on a convection process to produce heat in a specific room. Wall heaters may be more efficient since it takes less time to heat up your home or a single room than it does with a baseboard heater.
Can a wall heater be mounted directly to a wall?
If you're concerned about space, a wall heater may be ideal. Since they're mounted directly to a wall, they won't get in the way of your furniture and will save your available floor space . A baseboard heater is attached directly to the baseboard, which means it might affect your furniture layout.
How much does it cost to install a baseboard heater?
Most homeowners pay between $395 and $975 for a 1,000 to 2,500 watt electric baseboard heater installed by a licensed electrician on a dedicated 208/240 volt circuit. Most of the cost is in installation labor. If the heater doesn’t have an internal thermostat, and you want to install one to control it, your cost will be on the upper end of the price range.
What is an electric baseboard heater?
An electric baseboard heater is a popular choice for heating a small addition that the main heat source, such as a gas furnace, doesn’t serve or for use as supplemental heat in cool areas of your home.
How many watts does an electric heater use?
Watts – Heaters start at 120 volts and 500 watts and can be as large as 240 volts and 2,000 watts. The most popular heaters are 750, 1,000 and 1,500 watts. In each series, the larger the capacity, the more the unit costs.
How much does an electrician charge per hour?
According to the Homewyse electric baseboard heater estimate, electricians in rural OK average about $80 per hour. Those in Dallas/Ft. Worth pay an average of about $95, and in Boston, you can expect an average of more than $115 per hour.
How to calculate BTU/h to watts?
BTU/h to Watts: If you’re shopping for electric baseboard heaters and you see one listed by the number of BTU/hour that it produces, you can determine the number of watts by dividing by 3.4. Conversely, if you know the watts but are aiming for a certain BTU output, multiply watts by 3.4.
Which is better, hydronic or electric baseboard heater?
Standard electric baseboard heaters warm up very quickly – and cool down just as quickly. Hydronic baseboard heaters, those containing oil or water, heat up more slowly but retain the heat longer. Some homeowners consider them more efficient. A quick-heating standard unit is better for the bathroom; a hydronic unit you can turn on 30-60 minutes ahead of going to bed might be a better fit for a bedroom.
How long does it take to wire an electric baseboard heater?
2-3 Hours | Time to wire, mount and connect an electric baseboard heater.
How much does it cost to install electric baseboard heaters?
Electric baseboard heaters pros are the most cheapest form to install in a home. The average cost to install electric heat in a house is less than 10,000 dollars. They will also satisfy any insurance company as a main source of heat.
Why do people install baseboard electric heaters?
The reason people keep installing them is because they are also one of the cheapest methods to have installed and often meet any insurance providers needs.
How much electricity does an electric heater use?
A standard electric heater for up to 1 hour is a mere 1kwh per unit of electricity. Assuming it is a 1000 watt heater. That’s nearly .20 cents per hour if you want it to heat up the whole room. Even cheaper heaters use much less electricity. That means you will need to actually turn the heaters off occasionally so you are saving your electricity in the long run.
How long does a baseboard heater last?
They provide about 2.2 to 2.5 hours of heat a day. A standard incandescent bulb, which takes the same amount of energy to heat your home in 8 hours would give you 6.6 to 6.8 hours of heating. Baseboard electric heaters tend to heat more efficiently than standard incandescent heaters. However they tend to get very hot and cold very quickly. They are typically heated at one temperature and then allowed to cool as it warms up to a higher temperature than when they started heating. These hot and cold peaks and troughs can make heating your home extremely difficult. Of course it is not a good idea to place a heat register directly in the middle of a wall so we recommend installing a heat strip to allow the heat register to heat the opposite wall, and also provide a barrier from your feet.
What is the difference between baseboard heater and wall heater?
The main difference between a baseboard heater and regular wall heaters is that it will not come with the ability to completely heat up your entire home. You need to be a little bit mindful of that in order to have a decent heating system that will provide adequate heat and not make your power bill skyrocket. You should never try to install one your self. it is 240 volt and you can get a dirty shock.
How much does it cost to run a 1000 watt heater for 24 hours?
Section 8:How much does it cost to run a 1000 watt heater for 24 hours? The 1000 watt heater would cost you about $3.50 to run for 24 hours, if your electric bill is low. If your electric bill is high, the cost is more like $8. This means a 900 watt heater would cost you about $3 to run for 24 hours and have a 12% energy savings.
How many amps does an electric stove need?
As a general rule all full size electric stoves or ranges require a minimum of a 40 amp power...
What factors affect the cost of a baseboard heater?
Many different factors affect the cost of running a baseboard heater. The type and size of your home, how much you use it, weather conditions in your area, efficiency rating on the unit, and so forth .
What is baseboard heater?
An electric baseboard heater is a popular choice for heating an entire house. They are inexpensive to operate and can be set to keep the temperature in the room at your desired setting.
How many watts does a baseboard heater need?
Using our earlier example, let’s say that the space is standard. The necessary wattage is 1440 watts, implying a single 1500-watt baseboard heater or two 750-watt heaters could heat the room.
How much electricity does an electric heater use?
In most homes, an electric space heater uses between 500 watts per hour and 1500 watts per hour, depending on how large a heater you have. If you use an electric stove or other high-wattage electrical appliances, the amount of electricity used will differ from your home is all-electric baseboard heaters.
How many watts does a heater use?
An average size heater uses about 1500 watts per hour and costs between $0.11 to $0.30 depending on where you live in the United States.
What happens if you don't clean the baseboard?
If you don’t regularly clean out the space beneath or behind the baseboard heater, there will be an extra buildup of dirt that could lead to additional heat loss through those areas.
Is a baseboard heater good for your home?
Baseboard heaters are a great source of supplemental heating in your home that will help you save money and energy. However, there’s much more to it than just plugging them in and forgetting about them.
How much does it cost to heat a house with baseboards?
The average national cost to install a 72-inch, 1500-watt, 240-volt electric baseboard heater is $550.
How long does it take to install a baseboard heater?
It takes about 5 hours ( $250 to $400) to install an electric baseboard heater.
What Size Electric Baseboard Heater Do I Need?
Electric baseboard heaters come in a wide variety of sizes and wattages. Typically, the size area covered is based on the wattage and amps of the heater. However, if you have an area that is being supplemented by an electric baseboard heater, you may be concerned with the size of the heater itself. For instance, if you are trying to heat areas around windows, doors, or outside walls, measuring the area where you want the heat concentrated is the best course of action.
How much does it cost to install an electric heater?
Installation normally involves affixing the heater to the wall, hooking up a thermostat 1 (if the baseboard runs on a wall thermostat instead of internal control), and plugging the unit into an electrical outlet. It takes about 5 hours ( $200 to $600) to install an electric unit. Electricians charge between $40 and $120 an hour in addition to supplies and any extra wiring that may need to be done. However, the price does not include the cost of the unit.
How much does a 120 volt heater cost?
A 120-volt heater averages $50 to $120, depending on the wattage. A 240-volt heater ranges from $100 to $300 depending on the watts and requires an electrician’s skills to install it. The cost varies depending on the number of baseboard units being installed. Large rooms may need more than one heater.
How many square feet does an electric baseboard heater cover?
So, part of determining how many units you need requires you to know how many square feet one electric unit covers. Most manufacturers recommend slightly oversizing for safety reasons. We will assume that each heater will be at 1350 watts and 240 volts as this is adequate to cover 150 square feet.
Why is my baseboard heater dusty?
No appliance works well if it is dusty. Dust is a known blocking agent for any type of air, whether it is warm or cold. Also, dust creates allergens that can affect asthma too . Keeping your electric baseboard heater clean and free from dust enhances its ability to last a long time and be energy efficient. A heater that has to work harder to push the heat into the room due to dirt build up will break down more easily and require more repairs.
