To have a good-quality pot filler faucet installed starts at about $475, while those with upscale design and finish can top $1,500. Cheaper models starting under $100 retail are available, but their durability is suspect. Installation cost is a major factor in the price of a pot filler faucet.
Full Answer
How much does a pot filler cost?
You don’t have to overthink your pot filler, but a beautiful one can really make an impression in the kitchen or sit more quietly in the background. They can be pricey, just like any faucet. They range from $300 and up, average I would say is about $500-$800 for a good one.
Are pot filler faucets in style?
Pot filler faucets may look old, but they are incredibly practical. Not only that, but they’re also in style. Are you planning to install one yourself or hire a plumber for the job? Do you have to replace an old pot filler only or install the rough-in? Tell us in a comment.
What is the maximum flow rate for a pot filler?
Since a pot filler is essentially a kitchen faucet, you have to follow the same rules as you would for a sink faucet. Namely, the faucet shall not exceed a maximum flow rate of 1.8 gallons per minute at 60 PSI.
How do you install a pot filler faucet on a stove?
Add the sink and stove in their respective positions, then plan the best route for your new pipe. Considering the route on your sketch, measure the distance from the water line to the stove, then from the bottom to the point where you want the faucet installed. Pot filler faucets must be placed about 20 to 24 inches above the range.
How much does it cost to install a pot filler?
The Pot-Filler Faucet The average cost to add a pot-filler is around $450, including installation. However, the actual price will depend on the type you use and how far you have to run the new pipes.
How much does a plumber charge to install faucet?
Average Faucet Installation/ Replacement Cost Faucet prices alone are between $100 and $350, while the labor cost that you can expect from your plumber to replace a bathroom, bathtub, or kitchen faucet is between $45 and $150 an hour.
How much does it cost to run a water line for a pot filler?
The faucets themselves run from about $150 to well over $1,000. However, a basic, simply designed model should be more than adequate and cost around $250. The installation including materials, should run about $75 for a remodel or around $310 for an existing kitchen, depending upon the complexity of the project.
Are pot fillers worth it?
The bottom line Pot fillers can be a very useful tool in your kitchen as long as you do a little homework beforehand. They'll make it much quicker and easier to fill your pots while cooking.
How much does a handyman charge to install a bathroom faucet?
Faucet installation costs $120 to $300 on average, including removing and replacing an old faucet and adjusting the water lines. The labor cost to install or replace a kitchen, bathroom, or bathtub faucet is $45 to $150 per hour, with plumbers charging for an hour or two. Faucet prices alone average $100 to $350.
How much does a handyman charge to install a kitchen faucet?
It typically costs between $160 and $345 to install a kitchen faucet, but the cost can reach as high as $585 or go as low as $90, depending on several factors.
Is it difficult to install a pot filler?
While you'll still have to dump the water out in the sink, it eliminates half of the trip. Installing a pot filler isn't tricky, but a few factors can complicate the process.
How do you install plumbing for a pot filler faucet?
0:437:42How to Install a Delta® Pot Filler - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd a phillips screwdriver to fasten the faucet to the wall to fasten the faucet securely to theMoreAnd a phillips screwdriver to fasten the faucet to the wall to fasten the faucet securely to the supply. You'll need an adjustable wrench and some plumbers tape.
Where should a pot filler be installed?
The pot filler should be placed to the right or left of the cooking surface to avoid reaching over the cooking surface to access. The pot filler can be placed above the cooking surface. However, it can get hot from the surface burners or a large pot.
What is the best pot filler faucet?
The Best Pot FillersHavin Faucet Wall Mount.IMLEZON Stainless Steel Pot Filler Faucet.Moen S665SRS Wall Mount Pot Filler.Delta Faucet Wall Mount Pot Filler Faucet.Waterstone 3100-UPB Wall Mounted Pot Filler.AYIVG Kitchen Sink Brass Wall Mount Single Hole Pot Filler.
Does pot filler need to match faucet?
(like, a very modern faucet shouldn't be matched with a traditional pot filler..... they both should match your kitchen.) You should be able to find a pot filler to match your faucet, even if it's a different brand.
Do you run hot or cold water to a pot filler?
You can run either a hot water line or a cold one, they don't have a mixer and therefore can only dispense the water they are hooked to. They can be installed on the wall or on your countertop.
What Is a Pot Filler Used For?
A pot filler, also called a pasta arm, is a specialized, high-volume faucet that's typically mounted on the wall about 16 inches (40 centimeters) above the stove. This feature lets homeowners quickly fill large pots for boiling pasta and making soups or stocks.
How Much Does It Cost to Put in a Pot Filler?
Pot filler installation costs depend on a variety of factors, including the type of fixture, the location of existing pipes and whether the wall has to be opened to accommodate new water lines and shutoff valves.
How Much Does It Cost to Add a Pot Filler to an Existing Kitchen?
There will likely be some additional expenses when adding a pot filler to an existing home. This job typically involves removing the existing drywall or tiled backsplash to run a new water line through the wall opening. A building permit is also required when modifying a home's plumbing system.
Are Pot Fillers Worth It?
Kitchen upgrades can be a worthwhile investment. Some homeowners love their pot fillers, while others believe this seldom-used feature isn't worth the money. According to Remodeling, major kitchen remodels have a 54% to 57% return on investment. More selective upgrades generate returns as high as 72%.
DIY: Installing Pot Filler Faucet In 5 Easy Steps
If your home has had a pot filler installed already and you only want to replace the faucet, you’re in luck. Follow the steps below to do it.
How To Install A Pot Filler Water Line
If your home doesn’t have a pot filler installed, you’ll have to take care of the rough-in, too. This means cutting the drywall and installing a water line.
Are Pot Fillers Still In Style?
Practical or not, pot fillers look old. They can add a vintage touch to any interior, so you may wonder if they are in style.
Before You Start The Pot Filler Faucet Installation Process
We already established that pot fillers are trendy. Yet, this doesn’t mean that you should jump in your car and go buy one. Before you start, there are a few crucial things to consider.
Frequently Asked Questions
Not sure if you want to install the pot filler yourself and wondering how much it cost to hire a plumber? Wondering why pot fillers have two handles or how far the faucet should sit above the stove? Check out the answers below.
Conclusion
Pot filler faucets may look old, but they are incredibly practical. Not only that, but they’re also in style. Are you planning to install one yourself or hire a plumber for the job? Do you have to replace an old pot filler only or install the rough-in? Tell us in a comment.
Determining the Height of a pot filler
I researched the suggested height for a pot filler and I found that it was around 16″. In my case, I decided around 15″ placing my tallest pot with a steamer on the stove to determine height.
Running the water line to the pot filler
We had a a copper pipe that ran from our kitchen sink and dead ended with a cap – right under the stove. It seemed there was already a waterline ready. If you don’t have one, a plumber can add one from your sink fairly easily. I say fairly easily as if I would even know.
Cost of labor for plumber to install the pot filler hose
Once the tile was completed, our plumber came back to fit the pot filler on. Total cost for labor was $550 for about 4 hours of labor.
