
How much does it cost to install stair railing?
Wood stair railing: A most common choice for homeowners costing anywhere between $750–$1,250. Glass railing: A go-to-option for a minimalist look ranges from $1,500–$8,500. Cable wire handrails: Generally used for deck and outdoors, these features cost between $2,000–$3,250.
How much does it cost to replace a stair rail?
Replacing balusters (also called spindles) typically costs anywhere from $1,200 to $1,600. Putting in a handrail will likely cost anywhere from $700 to $2,500. How much does a new staircase railing cost? The cost to install a stair railing is $900 on average, but can reach as high as $10,000. Wooden handrails cost less than pricey metal options.
How much does a stair rail cost?
Safety rails on stairs or ramps will cost around $1,150 to install for a 10-foot length. While material costs are similar to a flat railing projects, labor will be higher by about $200 total because of the added complexity of the job. Wood deck railings will vary in price, but average about $75 per linear foot, including labor.
How much to replace a stair railing?
How Much Does it Cost to Install a Stair Railing and Balusters?
- Stair Railing Installation Cost. A 25-foot handrail costs $900 on average. ...
- Replace Stair Railing Cost. Replacing a railing costs at least $700 but could run up to $10,000 or higher. ...
- Stair Railing Cost by Type. ...
- Cost to Refinish Stair Railing. ...
- Cost to Paint Handrails. ...
- DIY Banister Installation vs. ...
- FAQs. ...
How Much Does It Cost to Paint or Stain a Stairway?
Why paint a stairway?
How to estimate the cost of painting a stairway?
How much does a professional stair painter charge?
What type of paint should I use for stairs?
How much does polyurethane cost per gallon?
What are balusters used for?
See 2 more

How much does it cost to paint a railing?
Cost to Paint Deck and Porch Railings It will cost $5 to $14 per linear foot to paint just the deck and porch railings. For porches, 25 linear feet of railings costs $125 to $350. For decks, prices range from $250 to $700 for 50 linear feet.
How many coats of paint do I need for a stair railing?
two coatsBecause of this, and the fact that the railing and banister are high touch areas, we put on two coats of paint. We wanted to make sure the white sealed the wood held up to the abuse it would no doubt receive. After the paint dried, we applied this top coat sealer to the paint.
How much does it cost to paint a set of stairs?
Cost to paint stair railings alone: $4 to $12 per linear foot.Cost to paint stair risers alone: $4 to $12 per linear foot.Cost to paint stair spindles alone: $4 to $12 per linear foot.Cost to paint stairs: Average of $350 to $450.Cost to stain/refinish stairs: Average $1.49 per square foot.
How long does it take to paint a railing?
0:552:11How To Paint A Wrought Iron Railing - Ace Hardware - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart at the bottom of the railing. And work your way up putting on enough paint to cover theMoreStart at the bottom of the railing. And work your way up putting on enough paint to cover the spindle. Complete all sides of the railing. Before moving on to the next. This way you avoid drops.
Do I have to sand stair railing before painting?
If there's worn and damaged old paint, you need to sand or scrape it off. If there's old paint, but it's in good condition, it just needs sanding over to create a rough surface for the new paint to stick to. We recommend using an electric sander for this job.
Which paint is best for stair rails?
Since handrails are such a high traffic surface, I recommend a hard enamel-type paint in a satin or semi-gloss finish. Flat or matte paints are generally more likely to blemish and can be harder to clean.
Do you use a brush or roller to paint stairs?
Use a brush for any details and angles where stair riser and tread meet. You can use a small foam roller for any larger, flat surfaces. Don't be tempted to apply thick coats of paint. The coverage will last much longer if you paint a few thin coats rather than one thick coat.
Do you paint steps or risers first?
It's easiest to paint the risers first, as you will still be able to cautiously walk up and down the stairs while they are drying. Painting the risers and treads different colors will add time to your project because you will have to let one color dry completely before going back and painting the other color.
How long does painting stairs take?
TIME: 1 hour When painting stairs without sanding, you must prime them. Primer will help you cover the wood and make sure you get even color. Prime everything. That means, railings, treads, risers, trim, banisters….
Is it smart to spray paint a handrail?
Easier to Paint Crevices. The final advantage to paint spraying a banister is that a paint sprayer makes it easier to paint crevices and hard to reach areas that brush strokes can have a hard time getting to. Stair banisters can be challenging to paint with a roller or a paint brush.
What color should stair railing be?
If you're only painting the railing, we recommend choosing a neutral color (such as black or dark brown) that will mesh well with the treads, spindles, and uprights. If you're painting the entire staircase, consider a color combination like black and white.
How do you paint a stair railing without sanding?
8:169:35How to Paint Railing Without Sanding! - YouTubeYouTubeStart of suggested clipEnd of suggested clipLater here we go painted railing no sanding a super simple project it's really easy to do fourMoreLater here we go painted railing no sanding a super simple project it's really easy to do four simple steps. Clean it first degloss second use a really good primer third and then your top coat.
How many coats of paint do I need for a metal railing?
Two CoatsBrush On Two Coats Of Paint This is where you'll really see your railings come to life. Begin by applying two coats with a small paintbrush. Starting from the top and working your way down the railings. Be careful to keep your coats nice and light rather than thick.
How long does railing paint take to dry?
If you are working on an outside railing, choose a paint that can survive the elements. Follow the paint can's instructions, but anticipate waiting around 24 hours for the paint to cure completely. You may need a second coat depending on the paint and the railing color.
How many coats of primer do I need for stair railing?
Unless you're using a two-in-one paint and primer, one coat of primer should do the trick. If you are going from a dark banister to a lighter one, you may need 2 coats of primer. Once your primer is dry, lightly go over it with your sanding sponge. This will help the paint stick for a better finish.
How do you paint a stair handrail?
How to Paint Stair RailingsWork in Sections. Completing smaller sections make a stair railing project more rewarding and less overwhelming. ... Lightly sand and clean. ... Prime all railing components. ... Apply paint and finish balusters first. ... Use artist brushes to cut in dark paint. ... Protect railing with a top coat.
How do you paint a stairwell?
Fill in any nail holes or blemishes with spackle or caulk to create a smooth surface. Prime the wall using a primer and apply latex or oil-based pa...
How long does it take to paint a staircase?
It can take a while to paint a staircase. Between painting each tread, riser, handrail, spindle, and baseboard, it may end up being an all day proj...
How much does it cost to paint a staircase?
On average, it costs between $225 and $700. However, the average cost with minimal prep work on your part is around $550 to prime and paint 63.5 sq...
Do painted stairs last?
Yes, painted stairs should last. As long as you choose durable paint designed for high-traffic areas, your stairs should stay beautiful for years.
What kind of paint to use on stairs?
You should use durable oil-based paint on stairs to keep your stairs looking beautiful for years. If you cannot afford oil-based paints, you can al...
How much does it cost to refinish wood steps?
A painter typically charges $50 per hour. The overall cost needs to be determined by figuring out the surface size of the wood steps that require r...
Cost to Refinish Stairs - 2022 Cost Calculator (Customizable) - Homewyse
The basic cost to Refinish Stairs is $10.17 - $12.32 per square foot in July 2022, but can vary significantly with site conditions and options. Get fair costs for your SPECIFIC project requirements. See typical tasks and time to refinish stairs, along with per unit costs and material requirements. See professionally prepared estimates for stairway refinishing work.
Cost to paint stair risers only - Professional Painting Contractors Forum
A forum community dedicated to professional painters. Come join the discussion about the industry, safety, finishing, tools, machinery, projects, styles, scales ...
How much does it cost to paint a stairway?
Other considerations and costs. This cost estimate is for painting the walls in a stairway only. You can also have the stairs painted and/or stained, which has similar costs for labor and materials but may require additional detail work due to the corners and angles of the stairs themselves.
Cost to Paint Wall - 2022 Cost Calculator (Customizable) - Homewyse
The basic cost to Paint a Wall is $1.31 - $2.71 per square foot in July 2022, but can vary significantly with site conditions and options. Get fair costs for your SPECIFIC project requirements. See typical tasks and time to paint a wall, along with per unit costs and material requirements. See professionally prepared estimates for wall painting and finishing work.
How much does it cost to paint a stairway?
The total cost to paint your stairs will obviously depend on how high the staircase is, but the average cost for a 12 foot high stairway (straight) would be $375. The surface area of the stairway needs to be properly measured to determine the cost of the project. This is calculated by multiplying the width by the length. In addition to the surface area, the painters must also measure the tread length, railings, stringers and any other items that need to be painted. There are other factors to consider that may determine the cost of your stair painting project which can include:
What is prep work for stair painting?
Prep work will include sanding; taping all of the walls, stairs, railings and other surfaces; spackling cracks and nail holes; vacuuming cobwebs and laying down drop cloths. When performing the stair painting, the painters will start with all of the necessary prep work.
How much does it cost to paint a rusted metal railing?
Here’s the dollars and cents. A painting contractor will charge $208 to sand, prime, and paint 100 square feet of rusted metal railing, which includes the labor and material.
Do porch rails need to be painted?
Many porches and stair landings have metal railings that provide a sturdy barrier and firm gripping surface to assure safe footing. But when the painted surface becomes chipped at high-use areas or rust forms from corrosion, the metal needs a good paint job to restore its good looks.
Can you paint a stairway?
This cost estimate is for painting the walls in a stairway only. You can also have the stairs painted and/or stained, which has similar costs for labor and materials but may require additional detail work due to the corners and angles of the stairs themselves.
Is it expensive to paint a stairway?
Painting a stairway is a quick way to refresh any home and create a whole new look. However, the complexity of painting stairs and stairwells makes this a more expensive painting job in most cases. There are many parts of a stairway that can be painted, and your total project cost will depend on exactly which elements are included in the new paint job.
Do you need durable materials for stair treads?
If you are painting, staining, or refinishing the actual stair treads, make sure that you use durable materials designed to hold up to foot traffic.
What Color Should a Bannister Be?
The banister is the long piece of material that holds your railings in place. That means you should color it something that matches the rest of your stairs. For example, if your bars are white, make the handrail the same color as the risers. You can also paint it an accent color or strip it to expose the natural wood grain. Either way, the glossier the stain, the better.
Do You Need to Sand Stair Railing Before Painting?
Always sand the surfaces you’re about to paint. That way, you gently remove all the debris before applying a new color. Sanding is an especially crucial step if your stairs are wooden. Wood staircases also require more effort to finish the surface and protect it from moisture.
How Do You Protect Painted Handrail?
Protect your painted railings with two or three generous coats of polyurethane. But wait until your paint fully dries before you apply them. And don’t lay polyurethane between paint coats because it could ruin your finish. So, wait until your color looks perfect first. Then, apply the sealant with a clean paintbrush to ensure maximum coverage.
How Much Does It Cost to Paint or Stain a Stairway?
Painting a stairway refreshes a room by providing an entirely new look. It can turn boring stairs into a focal point in any decor and create a more personalized space. Stairways may seem simple and even basic. However, they are complex, with numerous risers and treads. The intricate angles benefit from having a professional painter handle the project to ensure it looks ideal when complete.
Why paint a stairway?
Painting a stairway refreshes a room with a new look. It can turn boring stairs into a focal point in any decor and create a more personalized space. Stairways may seem simple and even basic. However, they are complex, with numerous risers and treads.
How to estimate the cost of painting a stairway?
To properly estimate the cost of painting a stairway, the surface size must be calculated. The length of the stairway treads and risers need to be measured to determine the surface area. This is achieved by multiplying the length by width . The tread nosing, the run, and the rise must be added together to determine the tread length. Then, measure the width of the tread. Multiply the total of the tread length and the width together to achieve the surface area. If the stringers 4 are being included in the paint job, add 2’ to the tread width before multiplying. The stairway hand railing is measured by starting at the top of the landing and measuring to the floor, and then adding 2’ to determine the linear length of the hand rail .
How much does a professional stair painter charge?
The painter will then paint and clean up when complete. Professional painters typically charge around $50 per hour. An average 12 ft. high, straight stairway of 63.5 sq. ft. with minimal prep including priming and painting would cost about $550.
What type of paint should I use for stairs?
The type of paint for stairs impacts the overall project costs, with some paint varieties costing more than others. Anti-slip and acrylic latex are some of the most popular and long-lasting, although they are more expensive. Anti-slip paint may use a clear, water or urethane-based sealer to offer better protection against slips and falls. This is a good choice for hardwood floors that may be slippery and senior residences where stairs can be harder to navigate. Acrylic paint is popular for stairway projects and other interior painting work, thanks to its combination of an acrylic resin and polymer solution. It doesn't take long to dry and is easy to maintain with a bit of soap and water to remove scuffs and stains.
How much does polyurethane cost per gallon?
Polyurethane comes in water-based ( $10 to 50 per gallon) and oil-based ( $25 to $35 per gallon ). If you are going with a natural wood stain on your stairs, you must apply multiple coats of poly to protect them from constant foot traffic. Whether you poly coat over painted stairs is a personal choice. While the poly adds life to your painted stairs, it also adds significant labor hours and drying time.
What are balusters used for?
3 Balusters: Small pillars that are used to support a railing, such as on a staircase.

Stair Painting Cost Factors
Stair Painting Improvements
- The most common improvement for a staircase is repair work. If there are loose boards, broken balusters and loose railings, then they should be fixed to prevent injury. The typical cost to repair a stairway is $45 to $70 / hour. Often times in older homes there may be worn carpeting on the stairs. Making your home look new might require carpet removal which would cost $1 per squar…
Other Stair Painting Considerations
- The type of paint used for a stairway will greatly depend upon the type of paint already used in your home. Sherwin Williams or Benjamin Mooreoil based or water based paints can be used, however oil based paints tend have a longer lifespan. While the majority of homeowners prefer one color on their staircases, adding a combination of colors can bring new life to a traditionally …
Contact A Stair Painting Company
- Looking for “painters near me” that can repaint your stairs? House painting can be a complex, messy and time consuming effort. Whether you need staircase painting done or other types of house painting or commercial painting we will get it done professionally and effectively. Our professional painters service the greater Fort Worth area including, North Richland Hills, Hurst, C…