The national average cost for cleaning up a flooded basement is between $2,000 and $7,000. Most people spend around $4,000 for full flood remediation and cleanup of a 500 to 800 sq.ft. basement with 2 feet of water and category 2 damage.
How much does basement water damage repair cost?
Basement Water Damage Repair Cost by Type of Damage . There are plenty of variables that are involved, but the average cost of repairs after basement flooding ranges from $75 to $15,000, depending on the severity of the damage and type of repair or replacement required. This is in addition to the cleanup and water removal cost.
How much does a flooded basement cost?
Basement Water Damage Repair Cost . Basement flood damage repair ranges from $2,000 to $85,000, depending on the water type and damage extent. Most often, this kind of damage in the basement results from flooding, though it can also occur from broken or leaking overhead pipes.
How much to replace a basement?
The cost to dig a basement for new construction is $12,000 to $36,000. Basement excavation costs $10 to $20 per square foot and takes 2 to 4 weeks to dig-out and build. Digging a basement under an existing house averages $47 per square foot because the house must be raised first.
How much water in your basement is too much?
The obvious answer is… any water in your basement is too much! But did you know that when it rains 1″ over an acre of land it produces approximately 27,150 gallons of water? And… although it varies based on whether it’s heavy snow or the light and fluffy stuff, a storm with as little as 3″ to 4″ of snow can produce 1″ of water.
How much does it cost to pump water out of basement?
The basic costs to pump out the standing water and thoroughly dry a flooded basement can start at around $500 and increase to over $10,000, depending on the amount of water to be removed and the equipment and procedures used to dry out the basement.
How do I get rid of standing water in my basement?
If your basement is only partially flooded, you can suck up standing water using a wet-dry vacuum. Otherwise, you'll need to call in a plumber or a disaster mitigation specialist to pump the water out. After pumping the basement, it may be necessary to run a dehumidifier to help dry out the area.
Can a flooded basement Be Fixed?
The cost to fix a flooded basement varies significantly based on the depth of the water and the type of the water (clean, storm, or sewage). Pumping out water and thoroughly drying a lightly flooded basement can cost around $500 to $1000.
Is it OK to have standing water in basement?
Water Depth: If the water is more than 2 inches deep throughout your entire basement, do not step into the water; you could get shocked. You may need to call in a professional plumber or water damage specialist to pump the water out as soon as possible.
How do I stop my basement from flooding in heavy rain?
Here are some obvious and not-so-obvious things you can do to prevent basement flooding.Install a Sump Pump. ... Install a Backwater Valve. ... Seal Your Basement. ... Properly Grade Around the Foundation. ... Install a French Drain. ... Check Your Landscaping. ... Use Downspout Extensions.
What kind of pump do I need to get water out of my basement?
sump pumpIf you own a house with a basement or live in a low-lying area prone to flooding, you probably need a sump pump. Water can accumulate in a basin or sump pit, and the sump pump moves it away from the home, preventing flooding and protecting your home's foundation.
How much does drying a basement cost?
According to the online estimates and calculators, waterproofing a basement can cost on average anywhere between $1,920 and $6,493. Per square foot, the average cost is $3 to $10.
How do you dry out a flooded basement?
If you already have water in your basement you'll want to follow these 7 tips to dry your walls and furnishings:Turn off the electricity. ... Pump the water out of your basement. ... Remove all your wet items. ... Clean the walls and floor. ... Get the air moving and remove excess moisture.More items...
Why is my basement flooding when it rains?
Persistent rain causes soil saturation, creating hydrostatic pressure (or water pressure). This pressure forces moisture through your basement walls and floor. Loose soil around your foundation absorbs water. Your gutters and downspouts get clogged with rainwater that pools right next to your foundation.
Where does basement floor drain go?
Your basement floor drain is located at the lowest point of your basement, and its job is to direct any water safely away from the house and to the sewer system or municipal storm drain system. This keeps your basement floor dry and prevents flooding, which may damage personal belongings.
How common is water in basement?
Unfortunately, water in the basement is extremely common. From seeping in through foundation walls to coming up through the floor, there are several ways for water to enter your basement.
Can you pour water down basement drain?
Grab a bucket and begin pouring water down the drain to fill the P-trap. Dumping a gallon or two may be enough, but adding about five gallons to the trap should successfully seal off all sewer gases. Additionally, adding water to the drain will let you see if it is working properly or if it is already clogged.
How do you dry out a basement floor?
Here's how to dry your concrete basement floor after flooding.Remove the water. Just like carpeting, remove the standing water by mopping it up, draining it or using a sump pump if severe.Air it out or use dehumidifier. Next open windows to get air circulating in your basement. ... Hire professional help.
How do you dry out a basement?
You can air out the basement by opening windows and running fans to circulate the air. You can also try turning up the heat in the basement, as warmer air will prevent moisture from condensing on cool surfaces. Another solution is to use a dehumidifier in your basement.
How do I get water out of my basement without a sump pump?
When the Power Goes Out – How to Remove Water from Your Basement Without a Sump PumpUse A Mop. It may seem like an obvious solution, but a standard household mop is a great place to start. ... Use a Handpump. ... Use a Wet/Dry Vac. ... Bring in a Generator. ... Use a Trash-Water Pump.
What can I use to soak up water?
How to Soak Up Water in the BasementRubber gloves.Wet vacuum cleaner.Thick towels.Pine-oil cleanser.Bucket.Dehumidifier.
How long should I run a dehumidifier after a flood?
After a flood, a dehumidifier should be operated long enough to dry the basement space completely, or as close as possible. At least two days shoul...
How to stop my basement from flooding in heavy rain?
There are some things you can do to prevent basement flooding. You can grade your lawn to run away from the foundation, leave a gap between any lan...
How to clean the concrete basement floor after a flood?
Concrete is porous, but it’s still fairly easy to clean after a flood with bleach or another disinfectant. You’ll want to scrub the floors with a b...
How long does it take to dry out a house after a flood?
Typically, it could take anywhere from a couple of days to a couple of weeks to dry out the property entirely. It depends on the severity of the fl...
How to remove water from the basement?
Removing water from the basement is usually done with a sump pump or another small pump when there is flooding. In some cases, professionals may ex...
Why do basements flood?
Flooding in basements often occurs due to heavy or prolonged rains, or a rapid snowmelt, as there is too much water for the ground to absorb. Other...
What is a Servpro?
Servpro and ServiceMaster are two national brands that are known for offering flooded basement cleanup services. They are not the only companies available, but as industry leaders, it is helpful to look at their average costs and see what people are paying. In the table and sections below, we’ll explore both service providers, including their average rates for flooded basement cleanup including labor and materials.
How much does SERVPRO charge for flood cleanup?
Servpro charges a minimum $145 service charge for any call and most people spend $3,000-$5,000 on flood cleanup for a 500 square foot basement with moderate flooding and damage when they choose Servpro. When it comes to water damage cleanup and restoration, their services start around $3.75 per square foot and can go as high as $7 per square foot, depending on the level of damage and type of flood water involved. Sewage cleanup and major restoration jobs could cost as much as $15,000.
How much does it cost to clean a basement flood?
Most flood cleanup services charge an average of $3.50-$7 per square foot. Keep in mind that while the size may impact cost, the severity of the damage (discussed above) will also impact costs. Based on size alone, we’ve created a table where you’ll see a breakdown of the most common sizes and what it costs to clean up flood damage in each.
How much does it cost to repair drywall after a flood?
The average cost of drywall repair after a basement flood is between $200 and $280. In the event of flooding that causes damage or molding to drywall, it may need to be cut out and replaced. Often, rather than replacing the entire wall, you can get away with cutting out only the drywall that was exposed to the flood waters. This will reduce the cost of replacement significantly, but it’s still going to be a costly job. The price that you pay will ultimately depend on how much drywall needs to be replaced.
Why are gutters clogged?
If your gutters are clogged and result in water getting into the foundation, this could cause a lot of issues. Gutters are designed to run rainwater away from your home and keep your foundation protected. However, gutters that are clogged or damaged could allow water to sheet right off the roof down to the edge of the building and foundation. It could also result in water seeping into the basement and creating a flood. This is common in areas with a lot of falling debris, although it can be avoided by keeping gutters clean and functional throughout the year and inspecting them regularly.
What is black water cleanup?
This is the most severe category of water damage and backup, and is also known as black water clean up. This flooding and backup requires immediate action for the safety of the residents because of serious health risks. Black water can be from sewage, storm-related flood waters, groundwater, and even from rivers or sea water. When this water gets into your basement, most of the items will need to be thrown out or completely disinfected and cleaned before they can be safe to use. This is typically the most expensive type of flood cleanup because of the hazardous risks involved. This cleanup can easily exceed $10,000, again depending on the size of the space and amount of damage.
Why does my basement flood?
In many cases, a basement flood occurs due to poor maintenance or improper care of appliances, sewer systems, gutters, and other areas of the home. By making sure that you keep your appliances in good working order and have your pipes regularly cleaned and inspected, you can prevent a lot of potential risks on your own. Not only that, but you need to get to the root of the problem in order to prevent further flooding and water damage. In the sections below, you’ll see the most common causes of flooding and backup in the basement, as well as what each costs to clean up, as well as how you can prevent them and what you should do if the issue happens to you.
What is waterproofing a foundation?
Waterproofing includes planning, preparation, sealing the foundation, waterproofing walls with cement, installing a sump pump or perimeter drain, diverting downspout runoff away from the foundation, and an epoxy injection to repair cracks .
Why is the cove joint in my basement vulnerable to leaks?
The home's cove joint is vulnerable to leaks because it's where the basement walls meet the floors. There is a small gap between the two that heavy rain and water seeps in. Interior or exterior drain tiles and an exterior waterproofing membrane are the best fixes.
How much does a waterproofing membrane cost?
A liquid waterproofing membrane costs $3.34 to $5.76 per square foot per coat to apply crystalline or elastomeric membrane, with 2 to 3 coats being the norm. The membrane keeps water from going through the walls to the inside of the basement and is available in different grades.
What is the first step to waterproofing a basement?
The first step to waterproofing is applying a protective seal or membrane . A wet basement can affect the foundation, support beams, and walls, and it can cause serious health problems if mold and mildew develop.
What is the best way to protect your home from water damage?
Choosing a combination of waterproofing products, methods, and sealing solutions is the best option, especially if you live in an area that experiences all four seasons. Taking care of water damage is one of the costliest repairs you can make to a home. You'll want to do everything in your power and budget to prevent damage from occurring.
How much does it cost to waterproof a concrete foundation?
A sheet membrane for waterproofing can be wrapped over the concrete foundation footing, applied to the walls, and tied into a perimeter drain system at or around the footing for $3.35 to $6.52 per square foot. Usually made or rubberized asphalt, they are stuck onto the walls. Extra care is required to prep the walls, joints, and holes properly, or it won’t be 100% effective. Be sure your contractor covers the top of the basement system with at least 6 inches of soil and backfill immediately after installation.
How much does it cost to waterproof a basement?
The average cost of waterproofing your basement from the outside with a coating or membrane is $3 to $6 per square foot , which typically includes materials and labor costs. The liquid or sheet membrane keeps water from penetrating the basement walls.
How much does a downspout extension cost?
Downspout extensions are priced at $1 to $15 each. Some downspouts end at the base of your home, causing moisture to collect near your foundation. Downspout extensions are pieces of metal or plastic that direct water away from your home. It's best to pair them with a French drain or swale to prevent erosion.
Why is it bad to have mosquitoes in your yard?
Excessive moisture around your home can result in a mosquito infestation. Mosquitos can spread harmful diseases to your family and pets - like Zika, Malaria, West Nile and heart worms - and make being outside unpleasant. Removing standing water from your yard will eliminate mosquitos and make your summertime landscaping a fun, and safe, place for the entire family.
How much does it cost to clean gutters?
The cost to hire a gutter cleaning service averages $150, or between $100 and $200. Clogged gutters and downspouts will overflow and allow water to collect near your foundation. Removing debris from your downspouts will improve flow and prevent flooding. Ignoring blockage can result in repairs or entire replacements. Gutter cleaning is a DIY-able job, but it's a good idea to hire a pro to ensure it gets done safety and correctly.
How much does it cost to waterproof a basement?
Basement waterproofing costs most homeowners between $2,000 and $6,500, but prices are dependent on the type of drainage and materials in your space. Cement waterproofing: $1,000 - $1,500. Cement coating costs around $40 per five-gallon bucket and covers 100 square feet.
What is a berm in landscaping?
In landscaping, berms are commonly used to direct rain away from flat or vulnerable areas. Berms are usually made from sand, plant debris, asphalt, or soil. It's important to consider what's surrounding your berm. Directing moisture into plant beds or toward your home or driveway could cause erosion or leaks.
How much does it cost to remove standing water from a house?
Most homeowners spend between $1,365 and $5,165 to remove standing water from their yard or home exterior, with a national average cost of $3,204. The project can cost as little as $400 and as much as $8,000, depending on a variety of factors including the drainage and landscape grading work needed to remove the water and prevent future flooding.
How deep is a basement floor?
They're usually eight-inches wide and eight inches deep, with two inches of gravel on the bottom. Installing a surface design is simple and DIY-able. Deep: Deep models run around your home's footing and move moisture away from your basement. It's easiest to add a deep design to your home during construction.
What Is Water Remediation?
Water remediation sounds complicated, but it’s really just the process of cleaning up, sanitizing, and restoring (or rebuilding) materials and surfaces after any kind of water damage has occurred. You might also hear terms like “water damage repair” and “water damage mitigation,” too. These phrases all mean the same thing. While water damage remediation can be considered the same as flood cleanup, it also encompasses a broader category of repairs, including damage from leaks.
How to Prevent Flood Damage?
In the yard, extend downspouts and improve yard grading if you have concerns about water collecting around your home’s foundation. Keep gutters and downspouts clear of debris, and make sure sump pumps empty out far enough away from your home. If you don’t have a sump pump installed, arrange to install one.
How does a dehumidifier work?
Although extraction starts drying a water-damaged area, excess moisture is always left behind. Heaters and air blowers help evaporate the moisture, while a dehumidifier removes droplets from the air. The length of this process is hard to determine as normal humidity in the home affects the process. Your restoration technician will want to ensure that everything is as dry as possible before moving on to the next step.
How is water remediation cost determined?
Water remediation cost will be determined by the room where the damage is sustained, as this affects the repairs needed. Different areas of the home will often have different repair needs. Below you will see the average cost for restoration repairs based on the room in your home where the damage has occurred.
Why is it important to know the causes of a problem?
Knowing the potential causes helps you make the right decision about what remediation services and products are required.
How much does it cost to repair a wall?
One of the most common repairs included in the cost of restoration is wall repair, which runs an average of $300 to $2,200, depending on the project and the type of wall. This repair is most often needed when water comes in from the ceiling, such as roof leaks or when a pipe leaks or breaks in the wall. You may also need wall repairs if the area is flooded with an inch or more of standing water on the floor. Below you will see the average cost you can expect to pay based on the type of wall repair you need.
What is the first step in the restoration process?
An inspection and damage assessment is always the first step in the restoration process. A professional reviews the area and makes a detailed plan for making the area safe and structurally sound. It is important to understand that the initial plan and original price for the job may change if more damage is detected during the remediation process.
What causes a basement to flood?
Causes for a flooded basement include a burst water pipe, backed-up sewer lines, a failed sump pump, a broken hose on a water heater or washing machine and heavy rainfall. Costs will vary considerably depending on whether there's an inch of clean water covering the basement floor, a foot of sewer water, or several feet of water, ...
How much does a dehumidifier cost?
For do-it-yourselfers, portable utility pumps can cost $70-$250 each, with about another $50-$100 for a large-diameter discharge hose to direct the water out of the basement (some pumps can be connected to a garden hose, but the smaller diameter hose means the pumping will take longer). Dehumidifiers average $200-$300 for typical residential versions but can be $800-$1,200 for larger-capacity models like the ones professional restorers use (see How Much Does a Dehumidifier Cost.
How much does a sump pump cost?
It may be possible to prevent future flooding by installing a sump pump. These start around $100-$300, but can cost $2,000-$6,000 for professional installation. See How Much Does a Sump Pump Cost.
How much does it cost to pump out a basement?
Basic costs to pump out and thoroughly dry a basement lightly flooded with clean water can start around $500-$1,500 and increase to $2,000-$10,000 or more, depending on the basement size and the need to repair or replace damaged items such as flooring, walls, ceilings, support beams or furnishings. The major factors affecting ...
Why do basement walls buckle?
If standing water is pumped out of a basement too quickly, the walls can buckle because of the pressure pushing in from the surrounding water-soaked soil. Purdue University provides guidelines [ 4] for pumping water from a flooded basement. If the basement is filled with gray water or black water, all water-damaged rugs, mattresses, ...
What should be included in a flooded basement?
What should be included: Before entering a flooded basement, turn off the electricity and gas or fuel service; check the outside walls for any sign of structural damage or other hazards; and position fans to blow fresh air into the basement.
How much does it cost to clean a furnace?
If the heating system was flooded, the insurance company might require proof that it was cleaned by a professional before it's used again. Cleaning can cost $50-$150 or more, depending on local rates and if the furnace was damaged -- see How Much Does a Furnace Tune-Up Cost.
