Knowledge Builders

how much does it cost to rip up a driveway

by Dr. Tom Heathcote Published 2 years ago Updated 1 year ago
image

The national average cost of concrete removal is $1,444, with a typical range between $679 and $2,848 or between $2 and $6 per square foot. Low-end projects, in which pros remove a small, thin concrete slab, average around $260.
...
Type of surface.
SURFACEAVERAGE COST RANGE
Concrete Driveway$1,020 to $2,005
3 more rows
May 22, 2021

How do you rip out a driveway?

Asphalt Removal Tool GlossaryJackhammer – a vertical handheld tool that breaks up your driveway.Electric chipping hammer – a mechanical hammer that chips away stubborn, sticky pieces of asphalt.Circular Saw – a mechanical saw that cuts asphalt into pieces.More items...•May 13, 2021

How do you break up a concrete driveway?

0:2110:26Complete Concrete Driveway Removal Using a Skid SteerYouTubeStart of suggested clipEnd of suggested clipPossible so that I can pick it up with my Forks. And just load it into other dump trailer or a dumpMorePossible so that I can pick it up with my Forks. And just load it into other dump trailer or a dump truck.

How do you rip an asphalt driveway?

Asphalt driveway removal can be accomplished using a jackhammer to break up the asphalt or even a circular saw to cut the driveway into small pieces. The best way to remove asphalt, however, is with a larger piece of equipment, such as a Caterpillar 303 excavator from a rental center.

How much does it cost to cut asphalt?

Asphalt removal costs roughly $1-$3 per square foot on average, including debris disposal. The cost to demolish the average asphalt driveway and remove the debris is between $1,000 and $3,000.

How hard is it to jackhammer concrete?

0:243:44HOW TO JACK HAMMER CONCRETE EFFICIENTLY - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou know like you're jack hammering because you can spend a lot of time doing nothing with thisMoreYou know like you're jack hammering because you can spend a lot of time doing nothing with this jackhammer or you can spend a lot of time removing the concrete.

How do I make my driveway look new?

There are several ways to make your driveway more appealing, possibly becoming the envy of your neighborhood.Pressure Wash. ... Repair any broken pavers or bricks, fill any cracks. ... Add a border. ... Staining concrete driveways. ... Upgrade your driveway. ... Improve your landscaping. ... Lighting. ... Decorative Mailbox.Aug 25, 2017

How do you destroy asphalt?

There are three things that will destroy an asphalt parking lot if proper maintenance isn't performed in a timely manner.Surface Water. When an asphalt parking lot is installed, it is typically designed to sweep the water off the surface so it doesn't pool in place. ... Heavy Vehicles. ... Tree Roots.Dec 1, 2020

Can you put sod over asphalt?

But, you can't plant sod over asphalt. You'll need to lift it up. And disposal of it can be very expensive. You'll also need to get rid of the gravel that's under it.

Can you lay asphalt yourself?

Making your own asphalt driveway is hard work, and not a job for one person. If you have friends who will help you, it is possible to save a lot of money by doing your own driveway, even after the cost of rental equipment is factored in.

Is 2 inches of asphalt enough for a driveway?

Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.Feb 25, 2019

How long do asphalt driveways last?

High-quality asphalt pavement can last an average of 15 to 20 years with the right care and maintenance. The freeze and thaw cycles of the area along with the type of soil underneath the base stone are main factors in the lifespan of the pavement.Jul 4, 2019

Is asphalt cheaper than concrete?

To summarise, both asphalt and concrete are popular options for driveways. Asphalt is cheaper to purchase, easier and less expensive to repair, and resistant to cold weather. In contrast, concrete is more expensive to purchase, however, it requires less maintenance and is generally more durable.Jun 25, 2019

How much does it cost to patch a driveway?

Expect to pay between $3 and $5 per square feet to patch up your driveway, and twice that much if you’re going to hire professional help.

How much does it cost to resurface a 600 square foot driveway?

The national average cost for resurfacing a 600 square foot asphalt driveway is pegged at between $1,800 to $4,200 . On the other hand, the cost of resurfacing a concrete driveway is considerably less, with the national average being between $1,200 to $1,800 for a 600 square foot driveway. To resurface a concrete driveway, ...

What is resurfacing a driveway?

Resurfacing is essentially just repairing damage and adding a new layer of asphalt or concrete over your existing driveway. In some cases, your contractor may even take off the top layer of the existing asphalt before adding the new layer.

How much does a gravel driveway cost?

Gravel driveways are around the most affordable, costing between $1.25 to $1.50 per square feet. Amongst the most expensive driveway paving options are heated driveways, which cost an average of $10,000 to $16,000. Rubber driveways are another expensive driveway option, with an average cost of around $9,000.

Why won't my driveway last forever?

So while we may not need to bother about driveway maintenance very often, they definitely won’t last forever. Natural causes like weather, freeze-thaw cycles, UV rays, oil and gas leakage as well as repeated use will eventually take a toll on them .

How much does it cost to buy asphalt?

To buy asphalt enough for a driveway, you’d be buying around 7.5 tons to 15 tons at a cost of approximately $100 to $200 per ton. Of course, these costs do not include extras such as costs to pave sidewalks or curbs.

When is repaving needed?

Repaving is essential when your driveway has seen extensive damage and hasn’t been repaired for more than 20 years. It involves completely ripping open your old driveway and laying a new one. Repaving an asphalt driveway begins with digging up all of your existing asphalt.

How much does it cost to resurface a driveway?

Cost of Resurfacing a Driveway. Resurfacing a driveway usually costs anywhere between $1 to $2 per square foot. The price varies based on various factors such as your location, local competition, season in which you are opting for resurfacing and the condition of your driveway.

How much does it cost to resurface a 5,000 square foot driveway?

So the cost to resurface a 5,000 square foot driveway would be anywhere from $5,000 to $10,000. Cost of Repaving a Driveway. Repaving is more expensive than resurfacing because the repaving is much more labor intensive, requires more materials and time.

What is resurfacing a driveway?

What is Resurfacing? Resurfacing is a process of re-coating or putting a new layer on top of old driveway. Compared to repaving, resurfacing is a faster and simpler process to have a new driveway. Essentially, you’re just putting a new asphalt driveway over the old one.

How long does a driveway last?

Properly installed asphalt paved driveways have a life expectancy of about thirty or more years.

Why does my driveway crack?

Even with regular repairs and sealing, the smooth surface will eventually develop cracks and wear down due to several external factors such as damage from UV rays, salt, oil, gas and harsh weather.

Can you resurface a cracked driveway?

It is not a solution when your driveway needs repairing. As a general rule, resurfacing is a good way to go if about 25 percent of your driveway is cracked. Less than that and you can probably wait a while. If the damage is significantly worse, it’s time to think about repaving.

How much does a short driveway cost?

A short driveway (10x20 to 12x25 feet) might run $500-$1,000 or more, depending on total size and the thickness of the asphalt and the gravel base. At least two business days before any digging, call 811 (the free national Call Before You Dig service) to have utility companies mark any underground lines on your property.

How much does it cost to rent a concrete saw?

If removing only part of the asphalt and needing to leave a straight line, renting a concrete saw should be about $30-$50 (plus possibly another $25-$125 for wear on a diamond-tipped blade). For large projects, renting a small backhoe or skid-steer (also called a bobcat) with a breaker attachment can be $150-$350 a day.

How thick should asphalt be?

Although good asphalt paving should be 3-4 inches thick on a 4-6 inch gravel base, residential asphalt may have been installed only an inch or two thick, with little or no base under it -- which makes removal easier.

Can you remove old asphalt?

For larger projects requiring heavy machinery, most excavation or paving contractors also remove old asphalt. Asphalt companies often have equipment specifically designed to rip out old asphalt, although typically they do this as part of a replacement project.

Factors in Calculating Heated Driveway Cost

When budgeting for the cost of a heated driveway, simply considering the national average of $3,900 may not be enough. There could be regional disparities in pricing due to the cost of labor, access, or your home’s location, if remote.

Additional Costs and Considerations

If you’re asking yourself, “How much does a heated driveway cost?” it’s essential to consider your specific situation as well as your options. Does the heating system you selected require you to remove your old driveway and install a brand-new one? If so, that will add to the cost.

Heated Driveway Cost Types

There are two types of heated driveway systems: electric and hydronic. Both systems rely on heating elements underneath the driveway. Both can be automated with sensors that detect temperature and precipitation as well.

Benefits of Installing a Heated Driveway

There are multiple reasons a homeowner might benefit from a heated driveway. Possibly the most obvious is that you won’t have to shovel your own snow. Or, if you pay for a snow removal service, compare how much you pay over several years to the one-time cost of a heated driveway.

Heated Driveway Cost: DIY vs. Hiring a Professional

Installation of a heated driveway system is a complicated project. Experience and knowledge of plumbing, electrical, and paving are necessary to do a good job.

How to Save Money on Heated Driveway Cost

There are several ways to save money on heated driveway costs. One is to invest in heating mats instead of installing a radiant heating system. You can place mats on your driveway where you need them for targeted snow melting.

Questions to Ask About Heated Driveway Cost

When considering having a heated driveway system installed, it’s natural to have questions about the cost, the process, the results, and the installers themselves. Here are some questions to ask when getting estimates.

How much does it cost to remove a slab?

They can be a few inches thick to a full foot thick, so they have a wide range of costs associated with their removal. The average range is $600 - $1,000.

How much does it cost to cut rebar?

This requires cutting through both the concrete and the rebar and costs between $4 - $6 a square foot.

How much does it cost to remove unreinforced concrete?

It is much easier to break into pieces, so it may be cut and removed quickly, even by hand if necessary. It costs between $2 and $4 a square foot to remove, depending on thickness and location.

How much does it cost to remove concrete gutters?

They are occasionally found on certain types of houses. They are also easy to break up and remove at an average cost of $350 - $500.

How much does it cost to remove an old foundation?

If you have an old foundation that needs to be removed to replace an existing foundation or make way for new construction, the cost to remove an old one is between $4,000 and $10,000, depending on the size and how it was reinforced.

What factors impact the cost of concrete removal?

Many factors ultimately impact the cost of your concrete removal. This includes whether machinery is used or if the concrete needs to be broken and removed by hand. The concrete thickness and size also have an impact. The thicker the concrete, the harder it is to remove.

How much does it cost to excavate a driveway?

Excavating land can cost between $1,500 to $5,100, depending on the number of cubic feet that needs to be moved. Grading, or leveling the area to make your driveway smooth and well-drained, costs between $5 and $10 per square foot for professional graders, but steep driveways may cost more.

How much does recycled asphalt cost?

Recycled asphalt costs between $10 to $20 per ton, compared to $100 to $200 per ton for brand-new asphalt. Using recycled asphalt can save you $675 to $1,350 on driveway materials if it’s available in your area. Sometimes an installer can mill the old material onsite, cutting down on transporting supplies to your home.

How long does an asphalt driveway last?

Most asphalt driveways last up to 20 years. If your driveway is past its prime and showing its age, it’s time for a replacement. To completely resolve asphalt driveway issues, a replacement is the way to go.

How much does asphalt cost per ton?

It costs between $100 to $200 per ton. Cold mix asphalt costs $10 to $50 per bag, but it can be used only for temporary repairs. Cold mix shouldn’t be used for a whole driveway because it doesn’t last more than one or two seasons. Advertisement.

How much does it cost to seal asphalt?

Asphalt sealing typically costs $3 to $7 per square foot. This top coat costs less because it’s a thin layer on top of an existing surface. Asphalt sealant costs about $500 and should be done at least 6 months after the top coat. It provides a layer of protection to avoid cracking and environmental damage. An asphalt driveway requires regular maintenance, and sealing is recommended every 3 to 5 years. Any cracks or fissures should be patched up and remedied immediately.

How many square feet does a ton of concrete cover?

One ton can cover about 40 to 80 square feet, and the total amount needed depends on the thickness of the layers. A driveway 2 inches thick can run 80 square feet per ton, and a 4-inch-thick driveway can run 40 square feet per ton. An average driveway will need 7.5 to 15 tons.

How much does a heated driveway cost?

A heated driveway usually costs $12 to $25 per square foot, depending on whether it’s new or a replacement. For the average home, the cost will be between $7,200 to $15,000.

There should be a Title for the first person to start the mower on Saturday

There should be a Title for the first person to start the mower on Saturday.

Why do they taunt me?

I feed them, provide water for them, protect them from disease and insects. All I ask in return is for them to allow me to trim them all to a uniform height once a week. After I finished mowing these evening and was admiring my hard work I heard a distant laughing and that's when I spotted these two.

Starting to feel pretty good about my string trimmer edging skills

I've been thinking about buying a dedicated edger for my sidewalks but after the last few mows I'm having second thoughts.

Swedish Sunday Cut

Bought my first house this year. The sunday cut with noise cancelling headphones before firing up the grill really makes the day.

Lawn Mowing Simulator video game releases today

If you can't get enough, you can now grab a video game to support your addiction on your Xbox or Steam. It's pretty amazing. Here's the trailer.

Question: why can golf club groundsmen cut the grass so short on the greens?

One thing I always see on here is the warning: 'don't cut your grass too short!'

Possibly the worst Army Worm damage I've seen this year

Pulled up to this yard and my heart sunk. This used to be thick healthy fescue and now it's a wasteland... This is in Eastern Oklahoma, but Armyworms are being spotted up through Missouri and Kansas as well.

image

to Repave, Patch, Or Resurface?

Image
You may not always need to repave your drivewayentirely unless there has been extensive damage. You could resurface or patch it.
See more on blog.mykukun.com

Patching

  • If your driveway is showing minor cracks and not much damage otherwise, you could consider patching it up temporarily. This is not difficult, and you could do it yourself. Use an over-the-counter driveway patch to fill in the gaps and tamp it to ensure it is on the same level as the rest of your driveway. Expect to pay between $3 and $5per square feet to patch up your driveway, an…
See more on blog.mykukun.com

Resurfacing

  • Resurfacing is essentially just repairing damage and adding a new layer of asphalt or concrete over your existing driveway. In some cases, your contractor may even take off the top layer of the existing asphalt before adding the new layer. This is advisable if your concrete or asphalt driveway has around 25% damage. Resurfacing costs a lot more affordable than repaving. Resur…
See more on blog.mykukun.com

Repaving

  • Repaving is a much more complex job than resurfacing and requires the services of a professional paving contractor. Repaving is essential when your driveway has seen extensive damage and hasn’t been repaired for more than 20 years. It involves completely ripping open your old driveway and laying a new one. Repaving an asphalt driveway begins with digging up all of y…
See more on blog.mykukun.com

Other Driveway Choices

  • While we have been discussing asphalt and concrete driveways, mainly because they’re the most popular and durable, there are other materialsthat parking lots are paved of. Let’s take a quick look at some of these choices, and how much they cost. 1. A 600 square foot chip seal drivewaywill cost you between $1,200 to $2,400. 2. Gravel drivewaysare around the most afford…
See more on blog.mykukun.com

Why Repaving Is An Intelligent Choice

  • While patching and resurfacing may fix your driveway up for a while, these are not long-lasting solutions. Repaving, done right, will keep your driveway off your renovation list for at least another 15 to 20 years while being safer to use. A well-paved driveway also adds to a home’s curb appeal, and its market value as well. You now have an idea of how much repaving concrete and asphalt …
See more on blog.mykukun.com

1.How much does it cost to rip up a driveway? - Smith Harris

Url:https://smithharris.org/how-much-does-it-cost-to-rip-up-a-driveway/

31 hours ago Mar 28, 2022 · The national range for tearing and replacing a driveway is between $6,275 to $8,500. The average is $7,394 for a poured concrete driveway as per Angie's list members. The average cost is $3,500 to $7,000 which $3 to $10 per hour, roughly. The cost may be higher for long or curved driveways. On average, concrete

2.How Much Does It Cost To Repave or Resurface a …

Url:https://blog.mykukun.com/how-much-does-cost-repave-driveway/

35 hours ago Feb 14, 2020 · How much does it cost to rip up a driveway? The national range for tearing and replacing a driveway is between $6,275 to $8,500. The average is $7,394 for a poured concrete driveway as per Angie's list members. The average cost is $3,500 to $7,000 which $3 to $10 per hour, roughly. The cost may be higher for long or curved driveways.

3.Resurfacing vs Repaving Driveway Costs Comparison in …

Url:https://advanton.com/costs-of-repaving-resurfacing-driveway/

18 hours ago Feb 20, 2020 · Cost of Resurfacing a Driveway. Resurfacing a driveway usually costs anywhere between $1 to $2 per square foot. The price varies based on various factors such as your location, local competition, season in which you are opting for resurfacing and the condition of your driveway. So the cost to resurface a 5,000 square foot driveway would be ...

4.2022 Cost of Asphalt Removal - Estimates and Prices Paid

Url:https://home.costhelper.com/asphalt-removal.html

2 hours ago Jan 14, 2020 · According to CostHelper, the prices range drastically, from as low as $300 to thousands of dollars. A 12-by-25-foot driveway, with at least 4 inches of gravel, can cost about $300 to $1,000. Likewise, what type of driveway is cheapest? Pound for pound, aggregate is the cheapest of these four common driveway materials.

5.How Much Does a Heated Driveway Cost? A Budgeting …

Url:https://www.bobvila.com/articles/heated-driveway-cost/

8 hours ago Hiring a company to break up and remove asphalt paving runs roughly $2.50-$3.50 a square foot (although small jobs may cost more per square foot). A short driveway (10x20 to 12x25 feet) might run $500-$1,000 or more, depending on total size …

6.2022 How Much Does Concrete Removal Cost? - Fixr.com

Url:https://www.fixr.com/costs/concrete-removal

34 hours ago Apr 07, 2022 · Imagine flipping a switch and watching snow melt on your driveway from the comfort of your living room, as opposed to donning heavy clothing and boots to remove snow manually. While the cost of a...

7.How Much Does An Asphalt Driveway Cost? Here's What …

Url:https://www.bobvila.com/articles/asphalt-driveway-cost/

20 hours ago Jan 02, 2022 · Cost to Remove a Concrete Driveway Concrete driveways are very common. They range in size and thickness, so they have a wide range of average removal costs, but most fall between $1,500 and $2,500. Cost to Remove a Concrete Foundation

8.About how much does it cost to rip up an existing yard …

Url:https://www.reddit.com/r/lawncare/comments/4lvxu9/about_how_much_does_it_cost_to_rip_up_an_existing/

4 hours ago Apr 06, 2022 · Paving an asphalt driveway costs $4,737 on average, with a range between $2,932 and $6,568. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to...

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9