How much do Silca grates cost?
The Silca System Grates will cost you between $8-9 per square foot. Stone is the aspect that will vary in cost depending on which stone you choose – you can source stone anywhere from $3 to $15 per square foot. Combination of accessories such as lintel attachments, geotextiles, spacer tabs, polymeric sand can run you about $2 per square foot.
Do you know what Silca system is?
Have you calculated your waste factor? Silca System ® is a structural subbase for elevated decks that is connected to wood floor joists providing a substructure for a wide variety of heavy decking materials such as travertine, marble and other natural stones. When building a new deck or resurfacing an existing deck.
How easy is Silca system to install?
For Builders, Developers and DIYers; installation of Silca System is super easy. Silca grates sit on top of the joists at 400mm centres and fix down with 6 screws per unit. Done. Sick and tired of rotting and splitting wood? Pealing paint or fading stain? Forget about the continuous maintenance hassles and ongoing costs of wooden decking.
Can Silca be used on a deck?
For Architects and Designers, Silca System can be incorporated into almost any deck design. Achieve a PERMEABLE tiled patio on standard timber deck framing with LEVEL ENTRY. See specs and stats below For Builders, Developers and DIYers; installation of Silca System is super easy.
Are pavers cheaper than a deck?
Although wooden decking can offer a high percentage of return on the initial investment if you're looking to quickly increase the resale value of your home, over the long run, however, pavers are more cost-effective, lower in maintenance cost, and provide the better option for saving money over the course of your ...
What is a stone deck?
A stone deck is a stunning, low-maintenance alternative to a wood or composite deck. This course takes a detailed look at the engineered polymer structural grate support system used in the creation of stone decks. Common issues with wood and composite decks are presented.
How do you install pavers on a wood deck?
4:427:00Glue Pavers on top of Wooden Deck - Yes IT WORKS - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight into place and of course we need to make sure that there's no lip i mean you could have a lipMoreRight into place and of course we need to make sure that there's no lip i mean you could have a lip if you wanted to if that's what you're going for but we're not gonna have a lip.
Which is cheaper deck or stone patio?
It's cheaper to build a concrete patio in terms of both the initial cost to lay a concrete patio, as well as its cost of maintenance over time. A concrete patio costs only $4 per square foot, while a deck costs roughly $6 per square foot for lower-cost pressure treated lumber.
Which is better deck or patio?
Decks can provide a great view, while patios tend to offer more privacy. The views from your deck or patio depend on your home's location and surrounding environment. However, decks usually offer better views than patios due to their elevation.
Can you put pavers over existing deck?
Travertine pavers are often installed at ground level over granular stone, but they can also be put in place over a wooden deck. Substrate systems can be used over the wooden frame so that travertine pavers can be laid right on top.
Can you put concrete pavers over wood deck?
Wood decks can be covered in stone or pavers. Old wood decks can be renovated in a number of ways, ranging from stripping down the wood and refinishing it to completely revamping the entire structure to include pavers similar to what you would find on a patio.
How much does Paverdeck cost?
Our galvanized decking kits retail from $10 per square foot depending on current specials and layout complexity. From a materials cost perspective, a PAVERDECK™ generally costs the same as a traditional deck – as low as $12 per square foot.
How do you build a stone deck?
In a nutshell:Plan the size.Dig a hole about 10 in. deep, and pack a 6-in. ... Set the patio stones and brick in a layer of sand and tamp them down so the surface is even.Fill the cracks with sand, tamp again, then landscape around the new patio and you're done.
Can you put stone over a wood deck?
Wood decks can be covered in stone or pavers. Old wood decks can be renovated in a number of ways, ranging from stripping down the wood and refinishing it to completely revamping the entire structure to include pavers similar to what you would find on a patio.
What can I cover my old deck with?
1.1 1. Wooden Design Interlocking Deck Tiles.1.2 2. Composite Decking.1.3 3. New Deck Boards.1.4 4. Deck Rite Floor Covering.1.5 5. Artificial Turf Interlocking Tiles.1.6 6. Power Wash, Stain, and Seal.1.7 7. Deck Paint.1.8 8. Big Floors DuraGrid Outdoor Interlocking Plastic Deck Tile.More items...•
How many screws do you need to install silica grate?
Silca grates are screwed to the deck joist using six 65-75mm wood screws per unit. There are pre-formed countersunk holes in the grates, so location is easy. Do not over tighten your screws as this can damage the grate's structure. A firm hold on the countersunk holes is fine.
What adhesive is used on pavers?
Any construction adhesive that is suitable for exterior use on plastics and your choice of paver/tile. (SikaFlex MS 123 is awesome and sticks most tile or pavers types to the plastic of the Silca Grates.) (Laticrete Titanium for a mixable, trowel on type application)
How far can a paver span?
Almost all paver types can be installed over Silca System. The maximum distance any paver will ever need to span is only 50mm (over the hexagonal cell of the grate) therefore tiles do not need to be structural.
How many units are in a silica grates pallet?
Silca Grates are stacked and wrapped on a standard timber pallet. (162 units per pallet, that's 30sqm) Custom shipping solutions can be arranged dependent on quantity and location. Please talk to our staff regarding your specific requirements.
What is a silica paving system?
Silca system is a structural paving support for elevated decks and patios. It is a grating product that screws directly to the joists of a standard timber deck structure and provides a sold, flat surface on which to lay most kinds of paving.
Where is Silca manufactured?
We distribute Silca System direct from our manufacturing facility in Auckland, NZ to save you time and money. Alternatively should you prefer to use your local building supply merchant we do this regularly and are happy to supply through them.
Can you use a silica joist on a paver?
Yes. Silca System can be installed in conjunction with DeckChairSystems rubber mount and ripped joist system, providing a structural surface for most paver types. Please see our Silca I-Lock Connector and rubber mount here