Cost of Split Rail Fencing
| Split Rail Fencing Costs | Zip Code | Lineal ft. | |
| Basic | Better | Best | |
| Split Rail Fencing – Material Prices | $825.00 - $900.00 | $975.00 - $1095.00 | $1125.00 - $1285.00 |
| Split Rail Fencing – Installation Cost | $850.00 - $975.00 | $1000.00 - $1235.00 | $1300.00 - $1500.00 |
| Split Rail Fencing – Total | $1675.00 - $1875.00 | $1975.00 - $2330.00 | $2425.00 - $2785.00 |
Full Answer
How much does a split rail fence cost?
A split rail fence costs between $1,500 and $10,000 including materials, labor, and installation. The total cost is determined by the size of the space you are enclosing with the fence. You should expect to pay between $10 and 20 or more per linear foot in materials alone without labor.
How to make a rustic wood split rail fence?
How to Make a Rustic Wood Split Rail Fence
- Determining the Size of the Wood Split Rail Fence. It is difficult to purchase materials without knowing how much you need. ...
- Cutting out the Pieces. It is a good idea to measure and cut all of your pieces before you start assembling. ...
- Post Holes. ...
- Building the Wood Split Rail Fence. ...
How to build a DIY split rail fence?
- Tack cross rails to the posts and mark them for cutting with a framing square.
- Remove the cross rails and make the cuts with a circular saw.
- Fasten the cross rails to the posts with galvanized 10d (3-inch) nails or screw them in place with two 3-inch deck screws.
How to make a split router fence?
Make It - Adjustable Router Fence
- Clean Your Shop, Cut Your Wood and Then Cut It Again. Start with a clean shop. ...
- Preparing the Front. The front part of the fixed portion of the fence needs som attention now. ...
- Cutting the Angled Supports. ...
- The Adjustable Front Panels. ...
- Dust Collection Chamber. ...
- Assembly and T-Track Installation. ...
- Use, Enjoy, Breathe Easy! ...
What is average cost of split rail fence?
For a split rail fence, expect to pay an average of $20 per linear foot. Depending on the specific material and height of your fence, that cost could be as low as $11 per linear foot or as high as $29 per linear foot.
How deep do you dig for a split rail fence?
Dig holes about a third as deep as they are tall. For example, a 6-foot post needs a hole at least 2-feet deep, plus add about 4-inches for gravel. The diameter of the hole should be three times the width of the post. Ensure that the bottom rail will remain a few inches above ground.
What is the cheapest fence to install?
PVC fencing. The cheapest way to create a fence for your home is by getting one made from PVC. Such fences substitute wooden pickets and stakes to offer your protection from the outside world. PVC sleeves improve the stability of wooden posts used as a fence, reducing the cost of material and the labor used.
How long will a split rail fence last?
A wood fence split rail, or picket fence can add value to your home's beauty and security. A wood fence usually lasts approximately 15 years. However, with the proper maintenance, you can extend the life of your wood fence to 20 years or more.
Do split rail fence posts need to be in concrete?
No, the hole should be filled only with the dirt that came out of the hole and tamped back in . Concrete is bad for the wood (erodes it), and gravel simply creates a porous pocket where water can collect. Well tamped soil is very stable and waterproof. Some people use concrete for gate posts for additional stability.
How far apart should split rail posts be?
Some of the commonly available options are 9 feet long and 11 feet long rails. Knowing this measurement would help you to space the posts accordingly. 9ft rails have post every 8ft and 11ft rails have post every 10ft.
How much does it cost for 200 ft of fencing?
Labor – On average, labor costs to install a new fence range from $5 to $15 per linear foot....Costs To Fence In A Yard By Size.Fence Length (Linear Feet)Average Cost50$650 – $1,250100$1,300 – $2,500150$1,950 – $3,750200$2,600 – $5,000
How close to property line can I build a fence?
How Close To The Property Line Can I Build? Fences are typically built between 2 and 8 inches from the line between properties. Some areas will allow the building of fences directly on the property line, but in this case, you'll have to cooperate with your neighbor and potentially share the cost of the fence.
What is the easiest fence to install?
The quickest and easiest fence to install is with wood panels. The wood panels are not always the cheapest, but they save time rather than installing the rails and pickets separately.
What is the best material for a split rail fence?
Vinyl Split Rail Fence Vinyl fences are built to last and are made of highly durable materials that do not fade over time. Vinyl split rail is also easy to work with when you are assembling it and is the most durable type of split rail fence you can buy.
How tall should a 2 rail fence be?
3-4 feet tallTwo rail fences are 3-4 feet tall. Three rail fences are 4-5 feet tall. Four rail fences are 4.5-5 feet tall. Two rail fences are best for decorative fencing and small or serene animal confinement, such as dogs, goats, and alpaca.
Do fences increase home value?
A fence itself does not add as much value to the home when compared to material and construction costs. It will enhance the value of the home only if there is a true need for such an outdoor structure.
How high should a split rail fence post be?
Set split rail height. Each post needs to be marked at 36 inches from its bottom end. This leaves 24 inches for the depth of the whole and 12 inches from the ground to the first railing.
How do you make a split rail fence from scratch?
Steps to Building a DIY Split Rail FenceMark and measure your yard to ensure that your fence materials fit. ... Dig your post holes with your post hole auger. ... Fill six inches of the holes with gravel. ... Starting with the end posts, insert posts into the holes. ... Insert your rails into the holes of the posts, and voila!
Will split rail fence keep deer out?
This means that this area is full of moose, elk, and deer. Split rail fence helps keep them off the road by providing a deterrent. It also causes them to stop before jumping the split rail fences and running out into roadways giving drivers more time to spot them.
How tall should a two rail fence be?
The standard height for a 2 rail pole fence is 3′ above the ground but we can also create a custom height for your project as shown below for a beautiful garden fence we did.
How much does a split rail fence cost?
A 3-rail, 100′ foot fence with wire mesh and 2 gates, will cost approximately $12 to $18 per foot, installed by a local fence company.
How much does it cost to install a 3 rail fence?
Most homeowners pay an average of $15/foot for a 3-rail, split rail fence, installed. For the DIY’er out there, you can expect to pay around $10.50 per foot, not including the cost of a powered post hole digger.
What is the best fence to put around a house?
Wooden split rail fences are one of the most common, affordable, and easiest to install fences a homeowner can have installed around their property. While they won’t do much for security, they are perfect for adding curb appeal, and with an easily attached wire mesh, cedar split rail fencing makes the perfect type of fence to contain pets, ...
How tall is a 3 rail fence?
Length of Rails – Wooden rails are available in 8 foot or 11 foot spans. Height of Fence – Typically, split rail fences are installed at 4′ or 5′ foot finished heights.
Can you put a walk through gate in a slope?
Number and Type of Gates – Each gate you want incorporated into your fence will cost more money. Walk-through gates can be easily installed in almost any slope, however drive-through gates should be on level surfaces.
How much does it cost to install a vinyl split rail fence?
It costs up to $35 per linear foot to install a vinyl split rail fence with labor and materials included. Many builder-owners find the added material cost worth it when they don’t have to treat and replace their fence.
What Is a Split Rail Fence?
A split rail fence is a wooden fence that usually has two or three rails. Many people associate split rail fences with agricultural and livestock work. The wood in split rail fences is durable and resistant to rotting.
How long do steel fences last?
Luckily, both steel and aluminum fences have a long lifespan. You can expect a steel split rail fence to last as long as 70 years. Aluminum is durable as well and lasts at least 25-30 years but can last much longer.
How long does a cedar split rail fence last?
Depending on the cut of the wood, some cedar split rail fences can last up to 30 years.
What is an A frame fence?
An A-frame split rail fence , or a buck and rail fence, is another popular option that is often made of wood. It is not quite unique in material, but A-frame split rail fences are unique in design. They use slightly more material because they use a frame that posts into the ground.
Why are split rail fences so popular?
Split rail fences are popular for both agricultural and visual reasons, and it is a great fencing option. Let’s take a look at what you should expect to pay for your split rail fence, and what matters most.
How much does an A frame fence cost?
Some land is not stable enough for regular posts, so A-frames are used instead. An A-frame split rail fence costs $3-$5 per linear foot for materials.
How Much Does a Split Rail Fence Cost?
Table 1: Comparison of Split Rail Fencing Costs for Standard, Mid-Range and Top Quality Fencing.
How much does it cost to install vinyl split rail fencing?
For vinyl split rail fencing, expect to pay $15-$20 per linear foot for the material with the same $4 per linear foot for installation.
How much does it cost to install a fence?
As noted, the installation cost is about 25% of the job, or about $4 per linear foot. If you enjoy DIY projects, there’s no reason you can’t do the work yourself. Most fencing contractors will also install it, so it might make sense to get a few estimates. You can then decide if you’d prefer to save the money or save the time and effort it will take to do the job.
What is split rail fence?
Split rail fences give a rustic, casual look to any property and can provide a level of functionality as well. This type of fencing has been in use for centuries and continues to be popular today on ranches, farms and in rural residential use. This fence guide explores the details of split rail fences as well as the split rail fence cost you’re likely to pay on average, depending based on basic, mid-range and high end prices. Our goal is to give you the information you need to decide which type of fencing it best for the look and functionality you want.
What type of wood is used for split rail fencing?
Pine Split Rail Fence. There are several types of wood used for split rail fencing including cedar, pine, spruce and hemlock. Cedar species such as Western Red cedar has the best natural water-resistant characteristics. It will last the longest and requires the least amount of maintenance.
What color is vinyl split rail fencing?
When not painted or stained, it weathers to an attractive, classic silver-gray color. While wood remains the most popular, some manufacturers, such as Freedom Fencing, are now making vinyl split rail fencing products. They are offered in several colors and have the advantage of being completely maintenance-free.
What is the cheapest material for a fence?
Fence Material – The cheapest material is wood , followed by composite, however when you want an aluminum or steel fence, the overall cost can double. Table 2 shows a comparison of split rail fence costs by material.
How much does it cost to install a fence?
Fence installation costs $1,500 to $3,000 for an average yard with most homeowners spending about $1,800. New fencing costs $5 to $16 per linear foot, or about $2,016 to $9,011 for 1 acre. Prices depend on the type of fence materials used and the length and height of the fence.
How much does a security fence cost?
A security fence costs $30 to $60 per foot and is typically constructed from steel, iron, wire mesh, chain link, or a combination of metal. For the average home, expect to spend between $4,500 and $9,000 on security fencing.
How much does it cost to build a fence on 1 acre?
The cost to fence 1 acre runs a minimum of $1,050 and a maximum of $33,400 with most homeowners spending an average price of $2,016 to $9,011. The cheapest backyard fence is barbed wire which costs as little as $1,050 an acre, wheres a split rail wood fence costs about $7,000 for 1 acre.
What is the cheapest material for a fence?
The cheap fencing materials are wire with metal posts and wood, but even within those categories are many varieties of fence material costs. For example, if you need a wooden fence for your backyard, which wood will be the cheapest and last the longest? Compare fence prices in our list below. Keep in mind our prices do not include post holes & posts, gates, or other hardware.
Why do people fence their backyards?
Most people only fence their backyards because it’s where the kids play and the dogs run. Also, we want privacy, especially if we have a pool or hot tub. Backyard fences tend to be 6 to 8 feet tall to ensure privacy, and the most popular fencing material is wood pickets.
How much does a wood picket fence cost?
A wood picket fence costs between $1,500 and $2,100, with most spending $10 to $14 per foot on average. Picket fences are the epitome of the American dream. You can quickly put one up around your yard by using fence panels, which you can get in a variety of materials.
How much does it cost to install a wrought iron fence?
A wrought iron fence costs $24 to $44 per foot to install on average. For a standard backyard of 150 linear feet, cost estimates are between $3,600 and $6,600. A wrought iron fence looks classy, and it will last nearly forever. It won’t rot or decay, and it is impervious to insect damage.
How much does it cost to install a split rail fence?
With professional installation, a split rail fence will cost you from $12 to $30 or more per linear foot, $1,200 to $3,000 per 100 feet, and $9,960 to $24,900 to enclose an acre. Exact costs, like prices of other types of ...
What is a split rail fence?
Split rail, also known as post and rail, slip beam, or post and beam, are traditionally used on ranches or farms for decorative purposes or to mark a boundary. In some cases, homeowners add welded wire to keep animals in. Due to their low cost, simple design, and aesthetic appeal, these fences have become more common in the suburbs in recent years. A fencing professional has the expertise to determine which materials and features are best for your project, as well as install it properly so it will last for years to come.
How much does it cost to install fencing on an acre?
With professional installation, expect to pay $9,960 to $24,900 per acre. Total project price will depend on the material you choose, number of rails, and the condition of the land.
How much does a post and rail fence cost?
Depending on the material you choose, a post and rail fence will cost you between $1 and $4 per linear foot, per rail. Available sizes include 1 by 6, 2 by 4, and 2 by 6.
How much does it cost to build a steel fence?
You will pay $15 to $20 for a steel fence and $22 to $32 for aluminum, not including labor. The high price of aluminum and steel fencing make metal a rare choice for this type of structure.
Why is it more expensive to fence a yard?
Pastures and gardens in hard-to-reach areas of your property will cost more to fence because transporting equipment, materials, and laborers to the site takes more time and resources. Structures on easy-to-access property lines will be less expensive to erect.
What is the least expensive wood?
In most cases, using cedar or pine is the least expensive wood option. One exception is black locust, because it lasts long enough to make its large price tag a long-term bargain. Contact a fencing professional or lumber yard for pricing and availability of black locust.
Compare Other Fence Costs
How Much Does A Split Rail Fence Cost?
- Table 1:Comparison of Split Rail Fencing Costs for Standard, Mid-Range and Top Quality Fencing. Table 2: Comparison of Split Rail Fencing Costs for Split Rail Fence Types Table 3:A Price Comparison of Split Rail Fence Costs from Around the Web In terms of cost, a wood split rail fence is quite affordable, even when high-quality cedar is used. Depending on the type of wood a…
Factors Which Affect The Cost of Split Rail Fence
- Height of the Fence– The height of the fence will affect the cost due to the fact that more materials will be required. A shorter 4-foot-high fence, in comparison to a 6-foot-high fence will requir...
- Length of the Fence– The cost of any split rail fence will be higher the longer the perimeter you need to cover. This is obvious. As more materials are required, as well as more labour to inst…
- Height of the Fence– The height of the fence will affect the cost due to the fact that more materials will be required. A shorter 4-foot-high fence, in comparison to a 6-foot-high fence will requir...
- Length of the Fence– The cost of any split rail fence will be higher the longer the perimeter you need to cover. This is obvious. As more materials are required, as well as more labour to install t...
- Slopes, Ground and Accessibility– Building a fence on a slope can be challenging, additional skill and tools will be required to do a decent job. Building a fence on a significant incline is often...
- Gates – Simply put, more gates equals more money!
Considerations Split Rail Fence Installation
- Installation requires the use of a post hole digger, either a manual or powered tool. You might also need a saw for cutting rails to fit specific dimensions. If you plan to set the posts with concrete, you will need a manual mixer if you plan to pre-mix it. Many ranchers and farmers simply set the posts in the ground or pour dry cement into the hole, set the post and then add water. As noted, t…
Split Rail Fencing Style, Details and Usage
- There are several types of wood used for split rail fencing including cedar, pine, spruce and hemlock. Cedar species such as Western Red cedar has the best natural water-resistant characteristics. It will last the longest and requires the least amount of maintenance. Cedar is also very resistant to insect infestation. When not painted or stained, it weathers to an attractive…
Common Uses of This Fence Type
- This rustically attractive fence is used for both decorative purposes and practical use. For appearance, it is often used in front of a home to set it off from the road. In fact, sometimes, non-connecting sections are used purely for ornamental purpose. Split rail fencing won’t keep small pets or critters in or out, but it is effective for livestock, horses and other large animals.
Maintenance and Upkeep
- You don’t need to do any maintenance on a wood split rail fence, and this is usually what happens when hundreds or thousands of feet of fencing are used. Wood can also be stained or painted, and either will significantly prolong the life of the wood. Painting or staining is the best choice if you use wood other than cedar. Vinyl fencingis maintenance-free, though when shorter runs are i…