Vinyl (Polyvinyl chloride) is a synthetic plastic polymer that is popularly used in many products. A deck railing consisting of the material tends to take its characteristics. In terms of cost, vinyl deck railings are pretty affordable. It will cost you an average of $9 to $16 per square foot or $20 to $40 per linear foot.
Full Answer
What is the easiest deck railing to install?
looking for an easy railing installation? Opt for Impression Rail Express, which features a panelized metal railing system, with pre-assembled balusters and pre-drilled holes in the rails. LEARN MORE
Can you add railings to an existing deck?
On a deck with angles, most of the posts should have their inward faces parallel to the house, rather than at a 45-degree angle. The exception: If your stairs will come out at an angle, the railing posts should face in that direction so the stair railings can be easily attached.
How to install vinyl lattice around a deck?
Part 2 of 2: Attaching the Frames
- Attach the framed lattice panel to the porch or deck using 3 or 4-inch strap or T-hinges. Screw the hinges to the lattice frames first.
- Place each panel inside the openings under the deck or porch.
- Use a pry bar to raise the lattice frame so it will be tight against the porch or deck. ...
- Open and shut the lattice frames to make sure they shut properly. ...
How much does a quality deck canopy cost to install?
The average cost of installing an awning will sum up to $2,459. Most homeowners spend around $1,261 to $3,691 after the awning installation. The canopy alone will range between $250 and $3,500. A closer, detailed look at the costs are highlighted below.
How many feet of vinyl railing per hour?
How much does a vinyl deck railing cost?
What is a vinyl porch railing?
How much does it cost to install vinyl railing?
How much does it cost to rent a dumpster?
How much does it cost to remove decking?
What are the two main panels?
See 2 more
How much do vinyl deck railings cost?
Average Cost of Vinyl (PVC) Deck Railing Vinyl PVC decking prices range from $20 to $40 per linear foot. That's $200 to $400 for a 10-foot section of deck. Labor costs will vary, but expect to pay for 3 hours for the installation of a 10-foot section. At $50 per hour, that's $150.
How much does it cost to install vinyl handrails?
The average cost to have vinyl railing professionally installed is $32.00 per linear foot. DIY cost for just the materials averages about $25.00 per linear foot.
Which deck railing is cheapest?
For a basic deck railing, pressure treated lumber is the cheapest. Vinyl is best for low cost and low maintainance.
How long does vinyl deck railing last?
around 20-30 yearsThe average lifespan of vinyl railing is around 20-30 years. As a much harder material, aluminum railing has an average lifespan of at least 25 years, but can last even longer with minimal maintenance.
Is vinyl railing cheaper than aluminum?
When comparing vinyl vs aluminum railing, vinyl takes home the prize for affordability and style! Vinyl is the best porch railing material for you if you want a budget-friendly, traditional and clean-looking style.
How much does it cost to install an outdoor handrail?
Installing new railings on a concrete patio, porch, or set of steps costs an average of $80 per foot, but prices can range from $50 to $230 per foot, depending on the material you choose. Labor adds up to about $30 per foot, so be sure to factor that into your costs if you need a longer railing.
What can I use instead of deck railing?
Consider stainless-steel cables, metal tubes, or composite railings if you're looking for low-maintenance alternative to wood balusters and railings for your deck.
What is the most popular deck railing?
A horizontal metal deck railing is a perfect option to keep things simple. Stainless steel components with a brushed finish are the most popular.
What is the best maintenance free deck railing?
When it comes to finding a low-maintenance deck railing, you can't go wrong with vinyl or aluminum.Clean and versatile vinyl style.Will never rot, grow mold, or rust.White, brown, and tan are the most popular colors.Glass options for ultra-modern looking balusters are available.More items...
Can you put vinyl over wood deck?
Can you put a vinyl deck covering over wood? You should always apply vinyl decking over a continuous surface. Applying it directly over a wood plank deck is a no-go. Instead, remove the wooden planks and install plywood on the joists, then apply the vinyl deck covering.
What is the difference between composite railing and vinyl railing?
Composites offer several properties that hollow vinyl railings do not — components have a more solid feel, sport low-gloss finishes, and provide the appearance of natural wood. Also, composite railings have improved in terms of architectural style since their introduction.
Are vinyl decks worth it?
We won't lie to you—vinyl decking is an investment, but it's well worth it in the end. With the longest lifespan of all decking materials, vinyl is the clear choice when it comes to how long it will last versus wood or composite decking.
Is PVC railing cheaper than wood?
Cost: Wood costs less than vinyl. That said, it's important to keep in mind the cost of maintenance and the lifespan of the product. When you consider the long-term costs, vinyl is very affordable when compared to wood.
How do you install vinyl porch railing?
3:589:24Longevity T-Top Vinyl Railing Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipBeginning at one side of the rail align. The first balusters with the first routed home snap the topMoreBeginning at one side of the rail align. The first balusters with the first routed home snap the top rail into position continue down the rail snapping the balusters into the top rail.
How much do Composite railings cost?
The average cost of composite railing is around $30-$55 per linear foot.
How much does it cost to replace stair rails?
Most projects cost around $1,900 on average. Smaller projects like replacing banisters or treads run cheaper than big jobs like replacing or installing a staircase. Installing a railing costs from $700 to $10,000.
Cost of PVC Vinyl Decking - Calculate 2022 Prices Now
We were in the planning stages of our exterior remodeling project that included: New siding, windows, fencing, and a deck refacing. RemodelingExpense had pretty darn accurate cost calculators that helped us budget our projects, all relevant to our zipcode and contractors near me.I felt good Knowing exactly how much I should pay without getting ripped off.
Fair Cost Guide - PVC Vinyl Decking - Homewyse
Get 2022 PVC Vinyl Decking price options and installation cost ranges. Free, online PVC Vinyl Decking cost guide breaks down fair prices in your area. Input project size, product quality and labor type to get PVC Vinyl Decking material pricing and installation cost estimates.
Comparing 5 popular Deck Railing costs per Foot – Decks By E3
Material Cost. As with all things deck, wood is the most economical choice. One of the easiest railing materials to work with and buy. Maintenance costs will come into play later, but with the initial cost, wood is your entry-level price for a basic railing design.
What Should the Labor Cost for Installing New Deck Railing Be?
Answered by LCD: Depends a lot on how existing is built, and whether you are tyring to fit this in between existing support posts and such or doing a "free run" of standard factory length railing (except for cuts to fit length to corners of course). Can be as cheap as about $10-15/LF if just tearing off nailed on wood railing and putting up new factory lengths (5-10 LF each) along a now-bare ...
Homewyse Calculator: Cost to Install Stairway Handrail
Unit Costs: How Pros Price. Unlike other websites that publish pricing from unrelated jobs in the past, Homewyse creates up-to-date estimates from current Unit Costs.The Unit Cost method delivers high accuracy by using location, details and options for the unique requirements of each job. Contracting, trade, design and maintenance businesses rely on the Unit Cost method for transparency ...
The Average Cost of Vinyl Deck Railing Installation
To have a vinyl railing installed by professionals will cost you around $30.00 per linear foot on average, while DIY installation will take around $25.00 per linear foot from your budget.
Factors That Affect The Cost
There are basic costs that determine the cost of this project, but there are also several cost factors that will affect the overall price. These factors will help you narrow your costs.
Use this FREE service
HomeGardenGuides.com is a free service that quickly matches you with top-voted local fencing Specialists.
Cost of Disposal
If you got an old and damaged deck you will have to get rid of it before making a new one. You can rent a dumpster for around $300 and do it yourself. You can also ask your local recycling facility to take the waste.
Vinyl Deck Railing Project Cost
These are the three most common samples of deck railing projects. The prices shown are for 500 square feet.
Vinyl VS Other Materials: Compare Prices Now
Let’s take a look at the prices of different materials compared to vinyl.
DIY Vs Hire a Pro
Are you a skilled carpenter or do at least you have some average skills at working with the material?
How long does it take to install a 50 foot deck rail?
Installation time frames vary just as much. Installing 50 linear feet of deck railing can take as little as a few hours to more than a day depending on the material, railing complexity and, again, whether preassembled panels are used.
How high should a deck railing be?
Deck railings are required by local building codes for decks starting at about 30 inches above ground. Wood railing and PVC vinyl railing are affordable options, but can limit your view of the surrounding landscape due to their wider balusters. Cable, decorative metal and especially glass maximize visibility, but at a higher cost.
How much does it cost to remove railings?
If you have a large amount of railing to remove or are demolishing an entire deck, which contractors charge $5-$7 per square foot to remove and dispose of, renting a dumpster and DIY is a cost-saving option. Cost per cubic foot of container space goes down as the containers size goes up.
How much does a glass railing cost?
Glass Railings. $285 – $525 per Linear Foot. As you can see, the price range is wider with some materials, such as cable and glass, because there are more options and accessories available. Last Updated: Thursday, October 15, 2020.
How tall is a railing?
Railing Height – Common heights are 36”, 39” and 42”, and cost rises slightly with height.
Is there a DIY section for deck railing?
There is a DIY or Pro section in each Deck Railing Cost Guide where specific challenges for each material are discussed. Most also have links to video or written tutorials that will help you decide if installing deck railing yourself is within your skill set.
Can you use wood railings with cable balusters?
Wood or composite railing used with metal or cable balusters are popular options, for example. Railing kits allow you to choose your railing style and balusters separately. They’re a good DIY option, but take longer to assemble and install. That drives up installation cost if you hire a pro for the work.
How much does a cable railing cost?
is another option people gravitate to. A minimalistic view, with a modern look; however cable can be expensive. Some options like Westbury C80 VertiCable is a vertical cable railing system, and one of the better-priced cable options costing around $90/lnft (material only). DesignRail by Feeney (which is a fully customizable railing of several top rail profiles, and color options) runs from $120/lnft to $150/lnft (material only,) and is considered the elite cable railing system. DesignRail Kits, on the other hand, is a collection by Feeney available in Black only, with series 150 Rail, a Horizontal Cable Railing at a lower cost than DesignRail. The huge advantage in this system are Kit Posts; which are pre-drilled to make the installation process as simple as can be.
What is the best deck railing?
The Deck Railing Cost Comparison seems to show that Iron and Aluminum are the best valued deck railing options. Composite Railing with aluminum balusters or composite baluster infill is more expensive than all-aluminum rail, and Cable infill with composite railing will be more expensive than cable with aluminum rail. Some of the best cable railing Though, Cable Deck Railing tends to be similar in cost to Glass Railing or Glass Handrail.
What is a face mount post?
Aluminum Railing collections usually have a “face-mount" or "base mount" post option. This means the post is installed on the top of the deck and requires adequate blocking of the frame under the post locations.
What is a railing on a deck?
Railing is a structural barrier that keeps people and pets safe from falling, especially when the edge of a deck or patio is 18" from the ground, or more. Railing systems use Posts and Rails to complete stable, level and stair railing. It is important to understand the installation process before purchasing railings.
What is the most visible part of a deck?
Railing is arguably the most visible part of a deck. It is important to find the style, color, and size of railing that will match well with your house. With so many options available, we can help direct you to the railing that fits best for your project, and price range. Back to Deck and Rail Blog. Previous.
How often should I replace a wood railing?
Throughout the life of a deck, say 20 years, wood railing will either need be replaced completely at least once, or will require maintenance yearly if not bi-annually. For this reason wood railing is of the most expensive types of railing.
Is Al13 thicker than Al13?
Another system by Fortress, Al13, has a much thicker gauge aluminum than AL13 Home as well as a difference in fabrication style. Both systems are made by Fortress Railing, but are made differently, and both systems reflect those differences in cost. Composite Railing Costs.
Railing cost by material
If you choose wood as your preferred deck railing material, you will $40 to $50 per linear foot for materials. The average cost of installation inclusive of labor and materials is $80 per linear foot.
DIY Deck Railing Installation v Hiring A Pro
If you want to DIY your deck railing installation, you need to count the cost. First, do you have the skills to install deck railing? If you are handy enough to install railing by yourself do it.
Hiring A Professional
Hiring a professional is the easy way to have your deck railing installed. One factor to consider when hiring a professional is your budget. Hire a professional who will charge as much as you are willing to pay.
Factors That Determine Deck Railing Cost
The materials you choose to build your deck railing will determine how much you will pay. Wood, one of the most popular and attractive railing materials is also one of the cheapest. While aluminum, another popular railing material is on the higher end of the price spectrum.
FAQ's
Composite is a material made from recycled wood fiber and polymer resin. Its components make it a strong material for construction projects. Though it consists of wood fiber, it doesn’t rot or attract insects. It is durable, strong, and stable. It is affordable, attractive, and suitable for a range of projects.
What are the pros and cons of a PVC deck rail?
Cons: Does not last as long as other railing materials, such as PVC, as it is susceptible to deterioration and splintering. The material requires high maintenance.
Why do we have deck railing codes?
Why Have Deck Railing and Handrail Codes? There are several reasons why builders have and must abide by codes, such as building integrity, integrating modern and efficient technologies and consistency— but at the core of it all is safety.
Why are deck rails required?
Having deck rails prevents people and animals from falling at various heights and acts as a safeguard against the wind.
What are the pros and cons of vinyl railings?
Pros: Low cost and maintenance. Lightweight and easy to install. Vinyl does not necessitate painting or staining. Cons: Can appear cheap, has a limited palette of color options, and does not endure the winter as well as other railing materials.
What is the minimum width of a non-circular handrail?
Type 1: A circular handrail should have an outside diameter of 1¼ inches at minimum and 2 inches maximum. A non-circular handrail should have a perimeter of 4 inches minimum and 6¼ inches maximum, and a cross section not exceeding 2¼ inches.
How high should a handrail be?
An exception to the rule: If the handrail fittings or bendings are used as continuous transitions between flights, between treads with non-parallel edges, from the handrail to a guard, or used at the beginning of a flight, the handrail height at the fittings or bendings may exceed 38 inches.
How many steps are required for a handrail?
7.8: Handrails must be provided on at least one side of a flight of stairs (four or more steps).
Do you have to have a copy of PVC decking?
Be sure to have a copy of the PVC Vinyl Decking Manufacturer’s recommended installation requirements before starting , to make sure your project doesn’t end up costing you more money in the long-run.
When to get contractor pricing?
Try to get prices in late Fall, early winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season.
What is the best deck railing?
If money is the only consideration when choosing deck railings, then pressure-treated lumber or vinyl deck railing is the best option for your needs. However, if you are willing to consider other factors, your choices will vary depending on your priorities. Wrought iron can produce very beautifully designed railings. But you should have a huge budget for that.
Why composite deck railings?
Due to the inclusion of wood components, composite deck railings can give a natural wood appearance, which is essential for those who want to keep a natural design theme. And unlike vinyl guard rails, it comes in many colors.
How much does a railing cost per linear foot?
For example, ipe is a highly dense wood that is naturally resistant to rot and insects. In terms of cost per linear foot, it will cost you $33 to $45.
What is vinyl railing?
Vinyl (Polyvinyl chloride) is a synthetic plastic polymer that is popularly used in many products. A deck railing consisting of the material tends to take its characteristics.
How much does a metal guard rail cost?
For example, if you want aluminum deck railings, expect to pay $40 to $70 per linear foot. Stainless steel will cost $30 to $80 per linear foot, while wrought iron will cost $50 to $120 per linear foot. So, it’s safe to say that generally, metal is the most expensive guard rail material compared to wood, vinyl, and composite. So, what makes them that costly?
How much does it cost to build a guardrail?
A typical guardrail for your deck will cost you anywhere from $15 to $600 per foot for the materials alone. Those made of vinyl will probably be the cheapest. And most metal railings will be costlier. Labor will cost you an additional $30 per foot on average. In addition, you need to consider the construction permits.
What does appearance mean on a deck?
How your deck railing looks is a matter of concern. In this case, appearance refers to the colors, shapes, texture, style, and feel.
How many feet of vinyl railing per hour?
A team of two experienced installers can install 15 to 40 linear feet of vinyl deck railing per hour based on job complexity. There will be a little setup and clean-up time too.
How much does a vinyl deck railing cost?
How much does a vinyl deck railing cost? The Deck Cost Guide puts it at $13.00 to $25.50, quite a bit lower than our costs. That site might not consider that some premium-color vinyl railing materials cost quite a bit more than standard white vinyl materials. Home Advisor, at $20 to $40 per foot is closer to our estimate.
What is a vinyl porch railing?
Vinyl deck railing, also called plastic or PVC deck railing, is an affordable option for any deck. Vinyl porch railing is often used to cut the cost compared with using composite railing on a composite deck. It costs about a third of the price of aluminum railing, and considerably less than iron deck railings, though provides a different look ...
How much does it cost to install vinyl railing?
The average cost to have vinyl railing professionally installed is $32.00 per linear foot. DIY cost for just the materials averages about $25.00 per linear foot.
How much does it cost to rent a dumpster?
Many homeowners rent a dumpster for around $300 and do it themselves. If it is just railings you’re removing, you might be able to dispose of them a little at a time in your weekly trash pickup at no extra cost. Are they vinyl or metal? Your local recycling facility might take them.
How much does it cost to remove decking?
Paying the contractor to remove and dispose of old decking will cost $5.00 to $7.50 per square foot. If just railing is removed, the cost will be $2-$3 per linear foot.
What are the two main panels?
Your two main panel options are all-vinyl panels and those with metal balusters/pickets. All-vinyl panels cost less, but the balusters are wider, so they obscure the view a bit more than metal.
