Cost of 6 Foot Privacy Fence
| 6 Foot Privacy Fence Costs | Zip Code | Linear ft. | |
| Basic | Better | Best | |
| 6 Foot Privacy Fence – Material Prices | $300.00 - $432.00 | $489.60 - $573.60 | $608.40 - $732.00 |
| 6 Foot Privacy Fence – Installation Cost | $158.40 - $188.40 | $199.20 - $211.20 | $229.20 - $258.00 |
| 6 Foot Privacy Fence – Total | $458.40 - $620.40 | $688.80 - $784.80 | $837.60 - $990.00 |
Full Answer
How much does a 6 foot fence cost?
The average cost for privacy fence materials with installation to be roughly $4,000-5,700 for a basic 6′ ft. vinyl privacy fence. Exotic hardwood privacy fences will cost you roughly $6,000-$7,600.00 range Composite fencing will run you somewhere in the $7,600-$9,000 range. 4″x 4″ posts will cost roughly $20-$50.00 each.
How much does a 6 foot privacy fence cost?
Where you are located can also make a difference, primarily for the cost of labor. For materials, a simple 6-foot wood privacy fence can cost as low as $25 afoot, although these types of wood fences won’t last very long. If you upgrade to w high-quality, pre-stained wood, you may pay $40+ per foot for materials.
How much does it cost to install a fence?
| 2022 Price Guide To Installing Fencing
- National Average Cost of Fence Installation. Most fence installations cost between $1,600 and $4,000. ...
- Fence Installation Cost Guide. ...
- Wood Fence Installation Cost. ...
- Vinyl Fence Installation Cost. ...
- Chain Link Fence Installation Cost. ...
- Finding Fence Installation Near Me. ...
- Start Searching for a Vinyl Fence Installer Today. ...
How much does Home Depot charge for fence installation?
You can expect to pay $5,500, on average, for Home Depot to install your fence. Prices vary widely, so follow along as we explore how much Home Depot charges to install a fence. They say that tall fences make good neighbors, and to a point, I can agree with that.
How expensive is a 6-foot fence?
For professional installation of a typical 6-foot privacy fence around a regular-sized residential backyard, most homeowners nationwide can expect to pay between $1,788 and $6,961. Factors like size, fencing material, and the layout of your property determine the exact price of your project.
How much is a 6 ft wooden fence?
Wood Fence Cost An average 6-foot tall wood fence costs $2,755 to install, with most homeowners paying between $1,711 and $3,290. Depending on the type of wood, prices range from $12 to $27 per linear foot for both labor and materials. The total cost varies based on materials, size, design, and labor expenses.
What is the cheapest 6-foot fence?
The cheapest fence you can install is a wire fencing at $2 per foot on average, while a 6-foot high wood privacy fence costs $13 to $25 per linear foot, and vinyl fencing for $15 to $30 per foot.
How much does it cost for 200 ft of fencing?
Labor – On average, labor costs to install a new fence range from $5 to $15 per linear foot....Costs To Fence In A Yard By Size.Fence Length (Linear Feet)Average Cost50$650 – $1,250100$1,300 – $2,500150$1,950 – $3,750200$2,600 – $5,000
What is the cheapest fence to install?
What is the cheapest fence to build? According to HomeGuide.com (opens in new tab), the cheapest fence to build is one that's made of wire (such as barbed, hog, or woven), at around $1–7 dollars (£5 or less) per foot. Obviously, this isn't the most aesthetically-appealing of choices, however.
Is it cheaper to build a fence or buy panels?
Luckily, buying fence panels costs around the same as building the fence from scratch. Of course, you can spend much more when building a fence from scratch. Having infinite possibilities and options is not always the best for your checkbook. Generally, however, the cost will be about the same.
What is the easiest fence to put up?
The quickest and easiest fence to install is with wood panels. The wood panels are not always the cheapest, but they save time rather than installing the rails and pickets separately.
Which is cheaper wood or vinyl fence?
Cost. The cost of installing a new fence is relatively affordable. Installing a vinyl fence costs less than wood, although wood as a material is generally cheaper. Wood ranges from $2 to $10 per picket, while vinyl costs between $2 and $6.
Is metal fence cheaper than wood?
Wood is a less expensive material than metal, so if you're trying to save money upfront, it's a good material for fencing.
How do you estimate a fence?
How to Calculate Fence Materials - Building with Preassembled PanelsNumber of Fence Panels = (Total Lineal Feet of Project – Gate Width) / Width of Fence Panel. ... Number of Posts = Number of Panels + 1 + Number of Gates. ... Number of Fence Sections = Total Lineal Feet / Width of each Fence Section.More items...•
How much does a 6 foot chain link fence cost per foot?
A 4- to 6-foot chain-link fence costs $9 to $28 per foot installed. Chain-link fence materials cost $4 to $15 per foot, plus $5 to $15 per foot for labor.
How long does a wooden fence last?
When properly maintained — which includes replacing individual planks and boards as needed — a well-built wooden fence can last in good condition up to 20 years or more. There is that tradeoff we mentioned, though: A wood fence needs regular care; otherwise, if it's left to rot, then it's gonna, well, rot!
How much does a fence cost in Florida?
It can run anywhere from $1,100 to $2,300 for a basic yard or $14 to $19 per linear foot installed. This durable fencing is easy to install and you can choose from a few different styles including metallic-coated, color-coated, and estate fencing which is a type of steel fencing.
Is a vinyl fence cheaper than wood?
Cost. The cost of installing a new fence is relatively affordable. Installing a vinyl fence costs less than wood, although wood as a material is generally cheaper. Wood ranges from $2 to $10 per picket, while vinyl costs between $2 and $6.
How much does a 6-foot chain link fence cost per foot?
A 4- to 6-foot chain-link fence costs $9 to $28 per foot installed. Chain-link fence materials cost $4 to $15 per foot, plus $5 to $15 per foot for labor.
How much would it cost to build a fence around 1 acre?
Fencing projects range from $1,000 to $38,000 per acre, depending on the material used and difficulty of access and construction. For big projects, it's important to note that the more length you need, the lower your price-per-foot may be – as long as you go through a professional.
How much does it cost to build a fence on 1 acre?
The cost to fence 1 acre runs a minimum of $1,050 and a maximum of $33,400 with most homeowners spending an average price of $2,016 to $9,011. The cheapest backyard fence is barbed wire which costs as little as $1,050 an acre, wheres a split rail wood fence costs about $7,000 for 1 acre.
How much does a security fence cost?
A security fence costs $30 to $60 per foot and is typically constructed from steel, iron, wire mesh, chain link, or a combination of metal. For the average home, expect to spend between $4,500 and $9,000 on security fencing.
What is the cheapest material for a fence?
The cheap fencing materials are wire with metal posts and wood, but even within those categories are many varieties of fence material costs. For example, if you need a wooden fence for your backyard, which wood will be the cheapest and last the longest? Compare fence prices in our list below. Keep in mind our prices do not include post holes & posts, gates, or other hardware.
Why do people fence their backyards?
Most people only fence their backyards because it’s where the kids play and the dogs run. Also, we want privacy, especially if we have a pool or hot tub. Backyard fences tend to be 6 to 8 feet tall to ensure privacy, and the most popular fencing material is wood pickets.
How much does a wood picket fence cost?
A wood picket fence costs between $1,500 and $2,100, with most spending $10 to $14 per foot on average. Picket fences are the epitome of the American dream. You can quickly put one up around your yard by using fence panels, which you can get in a variety of materials.
How much does it cost to install a fence?
Fence installation costs $1,500 to $3,000 for an average yard with most homeowners spending about $1,800. New fencing costs $5 to $16 per linear foot, or about $2,016 to $9,011 for 1 acre. Prices depend on the type of fence materials used and the length and height of the fence.
How much does it cost to install a wrought iron fence?
A wrought iron fence costs $24 to $44 per foot to install on average. For a standard backyard of 150 linear feet, cost estimates are between $3,600 and $6,600. A wrought iron fence looks classy, and it will last nearly forever. It won’t rot or decay, and it is impervious to insect damage.
How much does it cost to build a 6 foot fence?
An average 6-foot tall wood fence costs $2,755 to install, with most homeowners paying between $1,711 and $3,290. Depending on the type of wood, prices range from $12 to $27 per linear foot for both labor and materials. The total cost varies based on materials, size, design, and labor expenses.
How much does a pine fence cost?
A fence built with pressure-treated pine costs between $3 to $7 per linear foot not including installation. Being pressure-treated, it helps prevent rot and insects; however, it will shrink, warp, and split in a dry season.
How high should a split rail fence be?
The height of the fence will affect the final cost of the fencing project. 3”, 5”, and 6” fences are the most common heights for fences, so, for example, if a split-rail fence is 3” high, it will only require 2 rails, whereas a 5” high fence can require 3.
How many pickets per 8' fence?
When estimating your fencing costs, expect to install a post about every 8’ and assume each panel is 8’ wide or each picket is 5.5” wide (17 pickets per 8’). You can calculate the cost of your preferred fence thus:
How long does a tigerwood fence last?
At $6–$15/LF, ipe typically lasts over 40 years and is resistant to mold. Tigerwood lasts longer than 25 years. Special tools are needed to drill holes into tigerwood for installation. Tropical/exotic woods are expensive, and pricing is usually by request only.
How much does it cost to install a privacy fence?
For an average 6-foot tall (200 linear feet) privacy fence, you can expect a total installed cost of $3,400 using an average of $17 per linear foot. These boards are mounted vertically to provide a complete privacy fence around a yard. This is one of the cheaper options for privacy fencing, and it can be installed within a day with the right post installation equipment.
What is board on board fence?
Board on Board Fence – A board-on-board fence looks like an interlocking picket fence, with wood slats overlapping each space on opposite sides.
How much of a fence post should be buried in the ground?
Put in the height of the fence in order to see the length of the posts you need to buy. That is important because at least ⅓ of every post should be buried in the ground and secured with concrete.
Why have a privacy fence around your property?
You might wonder why you should even bother building a fence. There are a number of reasons why having a fence around your property is a good idea:
How to calculate total number of pickets?
Total number of pickets = fence length in inches / (picket width + picket spacing) (round the result up)
Why do people put picket fences around their houses?
While this may not be an entirely serious reason, the fact remains that to many, a nice white picket fence around your property symbolizes achieving the American Dream.
How much space between posts?
Start by deciding how long is your fence going to be and how much space you want between posts. Typically, the post space is somewhere between 6 and 8 feet; or 2 and 5 meters, depending on your preference. Put the fence length and the space between posts in the first section of the fence calculator and it will return both the number of posts you should buy and the number of sections defined by the number of posts, which is a value we will need later on.
Can you build a fence the way you like it?
You're free to do it the way YOU like it. As long as you have all the right permits, you are the only one you'll have to answer to regarding the fence's look. No one will try to convince you to do it in a way that's more "fashionable" or tell you how to build a fence that they think would be better (not including your other half).
Is it cheaper to build a fence?
It's cheaper. By using this fence calculator to find out the amount of fencing materials you need, you don't need to buy anything else! With no construction workers or designers to pay, you can save loads of money.
How much does a 150 foot fence cost?
For a typical 1/5 acre yard, a 150-foot long vinyl privacy fence costs $4,272, while a picket fence runs $2,292 for both materials and professional installation. Vinyl picket fences are typically short at 4' high which has large gaps between each slat, whereas privacy fences typically range from 6' to 8' feet tall and don't allow neighbors to see in while also reducing noise.
How much does it cost to install a PVC fence?
The average cost to install a PVC or vinyl fence is $15 to $30 per linear foot with most homeowners spending $2,848 to $5,696 for both materials and professional installation. A typical 6-foot vinyl privacy fence costs $3,702 to install on average. The final price you pay is calculated by the length of the fence in linear feet, the type, and if there are additional elements like gates, solar post cap lights, hanging flower boxes, or other accessories.
How much does it cost to install vinyl pickets?
White is the most popular and go-to choice for vinyl fencing and costs an average of $17 per linear foot, while wood grain look can run $40 per linear foot, and black being the least common can cost as much as $60 per linear foot.
How much does a vinyl split rail fence cost?
Vinyl split rail fences cost $$6 to $8 per linear foot depending on the number of rails, and they are generally used to define property boundaries. Rail fencing does not give any privacy since you can see through the gaps between the rails. Labor costs to install a 2-rail fence is $3.68 per linear foot and $4.01/LF for a 3-rail fence.
How much does black vinyl fencing cost?
Black vinyl fencing is not as commonly installed by homeowners as white or other light colors, and as a result, it carries a higher cost than the more traditional options you might see at up to $60 per linear foot.
How much does a vinyl fence gate cost?
The typical vinyl fence gate will cost about $300 installed. Not every fence installation will have gates, but it does complete the look and is a valuable addition. Below is a chart which details vinyl fence gate hardware for five types of vinyl fence.
What is required to install vinyl posts?
Digging Difficulties – Any challenges in the terrain will amount to a variation in the expense you should expect to pay for your project. An auger, or post hole digger, is required to install the vinyl posts. If there is rock just below the clay preventing holes from being dug or elevation changes, then additional time will be spent on that portion of the install.
Design
- There are several design an height options to choose from when planning to install a privacy fence. Fence heights can range from 3-6 on average or as tall as youd like them to be. There are two main styles to choose from: Semi-privacy and complete privacy. However, you have severa…
Types
- You can choose from two types of PVC: traditional PVC or recycled. The first option offers a neat appearance; the white coating is typically clearer and shinier. PVC is waterproof and does not require any specific treatment. It has the capacity to resist the vagaries of weather including wind and thermal fluctuations.
Models
- Models of PVC gates and fences are sometimes presented as kits that are particularly easy to install. The prices of the gates or fences vary mainly by model. The difference can also be in the style of opening.
Advantages
- Traditional wood fence allows you to enjoy an aesthetically pleasing appearance in a wide variety of styles and colors. This option comes with the advantage of easy installation and maintenance. The work can be handled by anyone with a minimum manual skills but wooden fence does require some caveats. At first glance, it is important to mention that you should avoid installing the fenc…
Variations
- Price variations can be expected depending on the type of wood chosen, the available options include pine, spruce, red or white cedar. If you opt for a wooden fence, you will have to pay between $20-$35 per linear ft. You can choose between panels that are 5 or 6 feet high by 6 or 8 feet in length, which will also influence the total cost.
Prevention
- In addition, wooden fence (whether treated or not) requires the application of a protective coating or stain every five years or more (preferably every two years).
Construction
- Mesh is a generic term for the woven wire part of the fence. The fence is woven together in a diamond pattern and it is available in many sizes. A smaller model creates a stronger barrier. Chain link mesh can be made of galvanized steel, steel coated with plastic, aluminum or stainless steel. Some mesh is also available with PVC or vinyl coating. The gauge or diameter of the mate…