Cost of Stone Walkway
| Stone Walkway Costs | Zip Code | Sq. ft. | |
| Basic | Better | Best | |
| Stone Walkway – Material Prices | $420.00 - $440.00 | $570.00 - $575.00 | $630.00 - $655.00 |
| Stone Walkway – Installation Cost | $325.00 - $335.00 | $350.00 - $365.00 | $370.00 - $390.00 |
| Stone Walkway – Total | $745.00 - $775.00 | $920.00 - $940.00 | $1000.00 - $1045.00 |
How much does it cost to install a natural stone walkway?
Existing sidewalk, slab, or driveway will be excavated with hand tools to a uniform depth (up to 8") below final surface level. Excavation material will be distributed on site. The national average materials cost to install a natural stone walkway is $6.55 per square foot, with a range between $5.22 to $7.88.
How do I estimate the cost of walkway paver?
This Walkway Paver estimator will provide you with up to date pricing for your area. Simply enter your zip code and the square footage, next click update and you will see a breakdown on what it should cost to have Walkway Paver installed onto your home.
Where can I get the best price on flagstone steps?
Landscaping or, mason companies will most always get better prices on Flagstone Walkway — saving your back and additional costs of Flagstone Walkway, so shop around, ask your neighbors if they can recommend someone. How much do Bluestone Steps cost on average?
How do you make a stone walkway?
Tips to Create Your Stone Walkway 1 Make sure you have enough stepping stones, also known as flagstones, to complete your path. 2 Place stones along a well-traveled area of your yard to reduce wear on the grass and provide a stable walking surface. 3 Wear sturdy boots and gloves during installation. More ...
How much does it cost to install a natural stone walkway?
How much does it cost to install a stone walkway in 98102?
How deep should a sidewalk be excavated?
About this website
How much does it cost to have a walkway installed?
Most U.S. homeowners pay between $6 and $12 per square foot for installation of a new concrete walkway. Prices can go beyond this if significant grading is required or a complex decorative finish is requested. Get estimates for your concrete walkway from contractors near you.
How much does a stone paver walkway cost?
According to Home Stratosphere, the average cost of a paver path is between $1,700 and $4,600, including both materials and labor costs. In general, you can expect to pay about $5 per square foot for basic pavers or $15 per square foot for high-end materials.
What is the best stone to use for a walkway?
Limestone is a great choice for a stone walkway. It's a durable material, the stones can be cut into a wide variety of shapes and sizes, and it acts as a non-slip surface (perfect for those barefoot afternoons spent in your backyard!).
How much does it cost to make a stone patio?
National Average: $3,400 Brick, stone, and slate are just some of the options for a paver patio that can be designed to carry a home's design into the backyard. For paver patio cost, homeowners can expect to pay an average of $3,400, or between $2,400 to $7,000, to install a 280-square-foot patio.
Which is cheaper concrete or paver walkway?
The up-front cost of paving stones is 10 to 15 percent more expensive than concrete. The initial cost of pavers is higher than concrete. What are pavers, you might ask? Pavers are blocks, stones, or bricks used to cover an outdoor area, such as a driveway or a patio.
How much does a 20x20 paver patio cost?
How Much Does a 20x20 Paver Patio Cost? According to data from Lawnstarter, a 20-foot by 20-foot paver patio runs from about $3,500 to $8,900 (CAD 4,550 to CAD 11,600), including labor and materials such as clay brick, natural stone or concrete pavers.
What is the cheapest way to make a walkway?
Mulch and gravel are the cheapest pathway materials you can buy for rock walkways, and they make construction simple, too, making them two of our favorite walkway ideas. All you have to do is remove the sod, roll out landscape fabric and spread the mulch or gravel.
What do you put under stepping stones?
What do you put under stepping stones? In order for your stepping stones to be stable, they should be laid on compacted soil, a fine aggregate such as decomposed granite and cushioning sand for leveling.
What is the cheapest stone you can buy?
10 Most Affordable GemstonesAmethyst. Belonging to the quartz family, amethyst is both abundant and incredibly popular. ... Agate. A member of the quartz family and a variety of the chalcedony, agate gemstones come in a variety of colors. ... Citrine. ... Garnet. ... Hematite. ... Onyx. ... Peridot. ... Rose Quartz.More items...•
What is the cheapest stone to use for a patio?
Pea gravel ($) At $6–$10 per square foot, pea gravel is a low cost option. Since the stones remain loose and don't need to harden or set, this gravel can be used to easily create a patio in any shape. It's also as easy to install, so it's a relatively simple DIY project even for a novice hardscaper.
How much does it cost to install 1000 sq ft of pavers?
Paver Installation Costs $2 to $5 per square foot. Average installation: $6 to $10 per S.F.
How much does a 10x20 concrete patio cost?
COMPARE COSTS FOR SMALL, MEDIUM AND LARGE PATIOSPatio Dimensions (feet)Average CostSMALL12x12$1,730MEDIUM10x20$2,150LARGE20x20$3,650
How much does a 12x12 concrete patio cost?
The average cost for a 12′ x 12′ concrete patio is about $1,700, or $12 per square foot. The typical range for a concrete patio depending on design, color, and texture is $6 to $16 per square foot, or $864 for a plain slab to a vibrant custom design that costs $2,300.
How much does it cost to lay a brick walkway?
The average cost to build a brick walkway is $8 to $19 per square foot. This breaks down to a materials cost of $4 to $8 per square foot and a professional installation cost of $4 to $11 per square foot.
How do you install a paver walkway?
2:154:37How to Design and Install a Paver Walkway - YouTubeYouTubeStart of suggested clipEnd of suggested clipSet the first paver panel against a straight edge like a patio if possible the next panel shouldMoreSet the first paver panel against a straight edge like a patio if possible the next panel should overlap the grooves of the adjacent panels if your walkway is more than one panel wide stagger.
What material do you use for a walkway?
Concrete – Poured concrete is perfect should you want an even and smooth surface. Patterns can be stamped in the material should the homeowner be interested. Concrete pavers are an inexpensive tile substitute as they do not need mortar or grout and can come in various shapes and sizes.
How much does it cost to install a garden path?
On average, the cost range to install a garden path is between $1,700 and $4,600. 2.
How much does it cost to rake gravel?
A gravel path will cost you about $1.40 per square foot. If you have a concrete base, you should budget for an extra $6.00 per square foot.
What is a paver?
Pavers are large bricks that interlock to form patterns. They are highly popular and will last a very long time. Because of their longevity and the eye-catching designs they can make, they are becoming more popular.
How much does a permit cost?
There may be restrictions or extras that you need to think about for your budget. A permit, for example, can set you back anywhere between $200 and $1000 depending on your local laws and where you are located.
How is the cost of a garden path determined?
The largest of which will be the materials you choose to make your path from and the amount of material needed for your garden path. Your path can be straight and get you from point A to point B, or it can have curves and wind through your property.
What is the least expensive material to build a pathway?
Gravel is one of the most common and least expensive materials for building a pathway. When choosing gravel , you will need to select the gravel size and decide if you will have a loose gravel path or a path of gravel embedded in concrete. Gravel will come in many sizes, from coarse rock salt size to large boulders.
Can gravel be left loose?
When dealing with gravel, it can cause a slip hazard if it is left loose. When using it in a path, it is also common to install concrete or stone stepping stones. Another option is to pour a layer of concrete as the base and set the gravel into the concrete as it dries.
What is the difference between a brick and stone walkway?
(By contrast, a brick path is better suited to formal landscaping .) While stone paths sometimes are laid in mortar, this requires a concrete foundation and experience with stone masonry. A simple sandset path is much easier and is perfect for DIY installation. With this technique, the stones are simply laid onto a bed of sand, which keeps the stones stable and makes it easy to get everything level. When you're done, you can fill the spaces between the stones with sand or gravel or even plants that can tolerate foot traffic.
How to make a walkway for two people?
Mark the path of your walkway , using stakes and string (for a straight path) or two garden hoses (for a curving path). If the walkway will be used for frequent traffic, such as a path between a driveway and a front door, make sure it is wide enough for two people to pass by each other comfortably. Small garden paths or those leading to secret nooks in the landscape can be sized for a single person. Set up strings or hoses on both sides of the path.
How to slope a stone?
If you use large stones, which may collect water, slope the stones to one side of the path so water sheds from their surfaces. Make sure to slope away from the house or other structures. You can create a slope with the entire sand bed, if desired, but it's usually easier to slope each stone as you go, using a level. They should slope at about 1/8 inch per foot. For example, if a stone is 2 feet wide, it should be 1/4 inch lower on one side than the other.
How thick should flagstone be?
Most flagstone that is 2 to 3 inches thick is ideal. Thicker stones are stronger and heavier than thinner pieces; they're also often less expensive, due to their weight.
How to compact sand before setting stones?
Spray the sand with water to help concentrate and compact it prior to setting the stones.
Can you fill the spaces between stones?
When you're done, you can fill the spaces between the stones with sand or gravel or even plants that can tolerate foot traffic. Choosing stone for a walkway is mostly a matter of taste, as any wide, flat stones will do.
Benefits of a Stone Walkway
Building a walkway is a simple, satisfying home improvement project that can beautify a backyard or add curb appeal to the front of your home. You can choose natural stone, preformed paving stones or the tiled look of brick masonry.
Create Your Walkway
Whether you want a simple garden path or a more complex walkway that branches off to different areas, you need to do a little planning and prep work before you begin. Start by thinking about your landscape design. Take a look at Design Your Landscape for ideas and principles to consider. Decide on the type of stone you want to use for your path.
Stone Walkway Ideas
Once you’ve got your walkway in place, there are many ways you can accentuate it and build upon it to create the perfect outdoor space. Here are some ideas to get you started.
How to measure for paver base?
Crushed stone, which is what is recommended as a base material for a paver base is measured in cubic yards. First measure the square footage of the project area. This is achieved by simply multiplying the width times the length. Next, multiply your square footage by .01235.
Can you mark off underground lines?
Before you begin any project that involves digging, it is highly recommended that you contact your local utility companies so they can mark off where there are any underground lines. This is most often a free service.
Do brick pavers sink?
Brick pavers, when properly installed add considerable beauty to your home and are very functional as well. Without the proper walkway base material laid beneath the pavers you will run the risk of them sinking or settling unevenly. When installing pavers it is essential to install a layer of the correct walkway base material at the right thickness.
How much does it cost to install a natural stone walkway?
The national average materials cost to install a natural stone walkway is $6.55 per square foot, with a range between $5.22 to $7.88. The total price for labor and materials per square foot is $14.54, coming in between $12.40 to $16.69.
How much does it cost to install a stone walkway in 98102?
For your project in zip code 98102 with these options, the cost to install a natural stone walkway starts at $13.00-$17.49 per square foot. Your actual price will depend on job size, conditions, finish options you choose.
How deep should a sidewalk be excavated?
Existing sidewalk, slab, or driveway will be excavated with hand tools to a uniform depth (up to 8") below final surface level. Excavation material will be distributed on site.
