How do I change the water pump on a 2004 PT Cruiser?
2 Answers. To change the water pump on that 2004 pt cruiser, you have to remove the engine bracket and timing belt on the left side of the engine. Remove the timing belt cover, engine bracket and timing belt. Make sure to use a jack to support the engine when remove the engine bracket. 5 people found this helpful.
What does a water pump do in a car?
The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. .
Does the water pump need to be replaced with a timing belt?
In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.
How do you know when to replace a water pump?
Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump. Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary. Timing belt replacement.
How do I know if my PT Cruiser water pump is bad?
What are the signs of water pump failure for a Chrysler?Puddles of green coolant on the ground.High-temperature readings from the water temperature gauge.A low-pitched grinding sound from the engine.Water leaks from the front of the engine.
How much is it to replace a water pump in a 2004 PT Cruiser?
Taking all these points into consideration, you can expect to pay anywhere from $375 to $787 (including parts and labor).
Is it worth it to replace water pump?
Is It Worth Fixing My Water Pump? Absolutely, unless your engine has significant damage from overheating. If your vehicle is in good shape and you plan to keep it on the road for a while, it is crucial that you get the water pump replaced as soon as possible in order to prevent much greater damage.
How expensive is it to replace a water pump?
The average water pump replacement cost is $550, with prices ranging from $461 to $638 in the US in 2020. But typically depends on the type of vehicle you drive and the auto repair shop you take it to. Labor costs are between $256 and $324 while parts cost between $205 and $314. Estimate doesn't include fees and taxes.
How much does it cost to replace the water pump in a 2003 PT Cruiser?
Taking all these points into consideration, you can expect to pay anywhere from $375 to $787 (including parts and labor).
Why does my PT Cruiser keep overheating?
The most common reasons a Chrysler PT Cruiser is overheating are a coolant leak (water pump, radiator, hose etc.), the radiator fan, or a failed thermostat. Coolant leak (water pump, radiator, hose etc.)
What are signs that your water pump is going out?
The most common symptoms of a bad water pump are coolant leakage under your car and an overheated engine. The main symptoms of a bad or failing water pump include: Coolant Leak. Squealing Noise.
Can you drive with a broken water pump?
Heating and cooling may be affected by the vehicle. The car may begin to overheat as well. It is possible to drive your vehicle without a water pump, but not good to. Some people in the racing circuit or who drive racing vehicles purposefully remove their water pumps to obtain more horsepower to their engine.
How can I tell if my water pump is bad?
5 Symptoms of a Failing Water PumpCoolant Leaking. One of the first signs of a potentially faulty water pump is a puddle of coolant on the ground where you've parked your car. ... Rust or Deposit Build-Up. ... Noise. ... Overheating. ... Steam.
How long does it take to fix a water pump?
Fixing a broken water pump can take anywhere from two hours to most of a day. A simple replacement should take around two hours, but more complicated work trying to fix a water pump (which will save you money on parts) can take four or more hours.
What sound does a failing water pump make?
Whining or Groaning Noise A whining or groaning noise usually means that either a drive belt is loose, or the water pump pulley is bad. It may surprise your customer that a pulley could fail, but it does occasionally happen.
When replacing a water pump What else should you replace?
When changing a water pump, replace all old gaskets and seals with new ones. If your new pump comes with a seal, make sure it's in impeccable condition before installing it. (Some seals are so thin you could easily damage them when you rip off the packaging.)
When replacing a water pump What else should you replace?
When changing a water pump, replace all old gaskets and seals with new ones. If your new pump comes with a seal, make sure it's in impeccable condition before installing it. (Some seals are so thin you could easily damage them when you rip off the packaging.)
At what mileage should a water pump be replaced?
every 60,000 to 100,000 milesTypically, the recommended interval for replacing the water pump is every 60,000 to 100,000 miles, depending on various factors, such as the car model, road and weather conditions, and driving behavior. Therefore, if you plan to invest in a used car, ensure you verify whether the seller replaced the water pump.
How many years does a water pump last?
Manufacturer recommendations will usually range from 3 to 5 years or 50,000 to 100,000 miles. In areas with more severe hot or cold weather, that interval may be more frequent.
How long should a water pump last in a car?
60,000 miles to 90,000 milesThe expected lifespan of a water pump is 60,000 miles to 90,000 miles, but many can last longer than that. Usually, once your car has reached the coveted 100,000 miles, you can plan on the need for a pump replacement soon.