How much will a ton of gravel cover?
approximately 100 square feetA ton of gravel will cover approximately 100 square feet, 2 inches deep.
How many square feet will 20 tons of gravel cover?
How many square feet will 20 tons of gravel cover:- typically, 20 tons of gravel will cover approximately 2160 square feet or 240 square yards or 200 square meters area for standard 2 inch depth. A ton of gravel will cover around 108 sq ft area for 2 inch depth, so 20 tons of gravel = 108 × 20 = 2160 sq ft coverage.
How many tons is a ton of gravel?
0.714 cubic yardsA ton of gravel is equal to 0.714 cubic yards of gravel. 1 full yard of gravel is equal to 300 sq. ft. at 1 inch depth.
How much is a ton of stone dust?
Stone Dust or Screenings Cost. Stone dust costs $30 to $145 per ton, or between $10 to $25 per yard, depending on if it's delivered or picked up. The finished product can be used as a base material below patios and pavers, as a final base for horse barns, or for filling void spaces.
How many tons is a dump truck load of gravel?
How many tons is a gravel truck. A typical gravel dump truck is 12 to 20 tons payload. A 10-wheel dump truck carries 12 to 20 tons of gravel or around 8 to 10 yards depending on the rock size and type. Smaller dump trucks can manage about 13,000 pounds to 15,000 pounds or 6.5 to 7.5 tons.
How much gravel is in a dump truck load?
How many yards of gravel in a dump truck:- a standard sized dump truck is always recommended for your project. It can carry about 15 to 16.5 cubic yards of 3/4″ or pea gravel per truckload. Thus, a dump truck can have capacity to hold 15 to 16.5 cubic yard of gravel per truckload.
How many tons of gravel do I need for a 100 foot driveway?
A 100 foot driveway would need approximately 15.43 tons of gravel. A 150 foot driveway would need approximately 23.15 tons of gravel. A 200 foot driveway would need approximately 30.86 tons gravel. A 250 foot driveway would need approximately 38.58 tons gravel.
How deep should driveway gravel be?
Assuming you'll be using three types of gravel for this type of driveway, if you're wondering how deep the gravel base should be for a driveway, it's about 6 inches. The sub-base and the surface will also be about 6 inches of gravel as well, for a total of 18 inches.
How much aggregate do I need?
You would usually lay a 10mm aggregate at a depth of 30-40mm, but on a driveway this would need to be at least 50mm. A 20mm aggregate would need to be at least 40-50mm deep, and at least 50-60mm on driveways. A larger aggregate will settle and bond together better than smaller ones.
What is the cheapest gravel for a driveway?
Cheapest gravel for driveways. The cheapest gravel for driveways is crusher run, crushed shells, crushed concrete, slate chips, recycled asphalt, and pea gravel, which all cost $15 to $30 per yard, or less than $1 per square foot when purchased in bulk from a quarry.
How much gravel do I need for a 1000 foot driveway?
At 4″ thick, for 1000 square foot driveway, you will need approximately 330 cubic feet, or 13 cubic yards, or 19 tons of gravel, if you are using 1/4″ to 1″ size of gravel and for 100 square foot, 1.25 cubic yards, or 2 tons of gravel will be required.
Is stone dust better than sand?
Which is Better: Sand or Stone Dust? Sand is ultimately a much safer option than stone dust for paving projects. However, this is not a black-or-white issue. You may choose to use stone dust if you have a large supply of it, or prefer the texture and appearance of it.
How many tons of gravel do I need for a 100 foot driveway?
A 100 foot driveway would need approximately 15.43 tons of gravel. A 150 foot driveway would need approximately 23.15 tons of gravel. A 200 foot driveway would need approximately 30.86 tons gravel. A 250 foot driveway would need approximately 38.58 tons gravel.
How do I figure out how many tons of gravel I need?
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.
How do you calculate gravel coverage?
Measure the length and width of the area in feet and multiply the figures together. Multiply your area figure by the depth of gravel that you wish to use, ensuring your measurement is also in feet. If your depth is in inches, divide it by 12 first.
How many square feet does a ton of rock cover?
Product Coverage ChartMaterialAmountCoverage *(3” depth)Decorative Rock1 ton covers75-85 sq. ft. *(45-60 sq. ft. for 1 1/2″ – 3″ rock)Lava Rock1 ton covers200 – 210 sq. ft.*Driveway and Paver Base (Class 2, Class 5)1 ton covers65-75 sq. ft. *10 more rows
How To Convert Cubic Feet Into Tons
If your supplier sells materials such as gravel and aggregate by the ton, you would calculate the tons needed by dividing cubic feet by 21.6 (the amount of cubic feet in a ton).
How Much Does A Cubic Yard Of Gravel Weigh
One cubic yard of gravel can weigh between 2,400 to 2,900 lbs. One U.S. ton equals 2000 pounds, so a cubic yard of gravel could weigh up to one and a half tons.
How much does a yard of crushed stone weigh?from homeadvisor.com
You might not need to figure this out, but it’s handy to know. Most gravel weighs about 1.5 tons per cubic yard. So, for the examples above, 2.45 cubic yards of gravel weighs 3.68 tons or 7,350 pounds.
How to calculate the square footage of a driveway?from homeadvisor.com
First, calculate the area in square feet of your project. As an example, a 10-foot wide, 20-foot long driveway is a 200-square foot area. Then, multiply the area by the depth. For instance, if you are using four inches of crushed stone under a patio area or for a driveway, four inches converted to feet is .33. So, our calculation is .33 x 200 ÷ 27, or 2.46 cubic yards.
What is the stone calculator?from concalculator.com
Estimating the amount of stone your outdoor landscaping project will require can be difficult.
What is bulk material calculator?from concalculator.com
Our bulk material calculator is a powerful tool that will help you calculate the volume of stone required.
How deep is a sandbox?from concalculator.com
The base is to a depth of 4 inches.
How many tons is a cubic metre of aggregate?
Convert m3 to tonnes aggregate:- generally 1 cubic metre of aggregate weighs around 1500 kg and 1 tonne of aggregate equates as 1000kg, so convert m3 to tonnes aggregate such as 1500/ 1000 = 1.5 tonnes, hence you can use aggregate m3 to tonnes calculator as 1m3 aggregate = 1.5 tonnes.
What is the weight of 1 cubic meter of aggregate?
Weight of aggregate per cubic meter:- density of aggregate is ranging from 1420 Kg/m3 to 1680 Kg/m3,so weight of aggregate per cubic metre is vary from 1420kgs to 1680kgs. 20 mm aggregate density:- density of 20 mm aggregate is 1550 kg/m3, it means 1 cubic metre of 20 mm aggregate weight is 1550 kg.
How many cubic feet does one ton of gravel cover?
One and a half tons of gravel equals 1 cubic yard, which is approximately 27 cubic feet. One ton of gravel covers an estimated 80 to 100 square feet when poured 2 inches deep.
How much does a tonne of aggregate weigh?
Convert tonne to m3 aggregate :- generally 1 tonne of aggregate equates as 1000kg and 1 m3 of aggregate weighs around 1500 kg, so covert tonne to m3 aggregate such as 1000/ 1500 = 0.66 tonnes, hence you can use aggregate tonne to m3 calculator as 1 tonne aggregate = 0.66 m3.
How much is 1 tonne of gravel?
United States, 1 US tonnes of gravel is equal to 907kg, aggregate/ gravel conversion tonnes to m3 such as 907/1500 = 0.60 m3, so one US tonnes of aggregate/ gravel nearly equal to 0.60m3.
How many tonnes is 1 tonne?
In metric system 1 tonne is equal to 1000 kg, convert m3 to tonnes aggregate such as 1500/1000 = 1.5 tonnes, so 1m3 of aggregate nearly equal to 1.5 metric tonnes.
How much is m3 in tonnes?
Convert m3 to tonnes aggragate:- weight of aggregate may vary depending on their dry and moist condition, taking DLBD of aggregate such as 1500 kg/m3, in United Kingdom Imperial tonnes equal as 1016kg, convert m3 to tonnes aggragate such as 1500/1016 = 1.47 tonnes, so 1m3 of aggregate nearly equal to 1.5 UK tonnes.
How much does 1 cubic metre of aggregate weigh?
Convert m3 to tonnes aggregate :- generally 1 cubic metre of aggregate weighs around 1500 kg and 1 tonne of aggregate equates as 1000kg, so convert m3 to tonnes aggregate such as 1500/ 1000 = 1.5 tonnes, hence you can use aggregate m3 to tonnes calculator as 1m3 aggregate = 1.5 tonnes.
How much is 1 m3 of sand?
In United States, 1 US tonnes is equal to 907 kg, convert m3 to tonnes sand such as 1600/907 = 1.76 tonnes, so 1m3 of sand nearly equal to 1.75 US tonnes.
What is aggregate used for?
Aggregate or stone chips are used in Building, Bridge, dams Construction aggregate, or simply aggregate, is a broad category of coarse- to medium-grained particulate material used in construction, including sand, gravel, crushed stone, slag, recycled concrete and geosynthetic aggregates.
Calculate your estimated costs
Please note that many factors go into how much product you will need for your project. Calculations should be used for estimation only.
Download our 2022 Price Sheet
Please note that our pricing is subject to change. If you need help estimating costs visit our calculator page.
How much does gravel cost?
Gravel costs $0.50 to $2.00 per square foot, $40 per yard, or $30 per ton on average. White or black colored gravel such as ballast lime-rock, white limestone, or lava rock costs $120+ per ton, or $3 to $10 per cubic foot when ordered in small quantities.
How much does it cost to install a 12 foot gravel road?
Installing a 12' residential gravel road costs $5 to $10 per linear foot depending on the size and depth, local weather conditions, and permit costs. For large rural properties, a gravel road costs $21,000 to $65,000 per mile to install.
How much does bluestone gravel cost?
Crushed bluestone gravel rock costs $52 per ton or $74 per yard when picked up from a local quarry. Prices can double when you include delivery charges. Larger sizes of decorative-quality bluestone gravel cost up to $155 per cubic yard or $109 per ton when you purchase at least 5/8 of a cubic yard from a quarry.
How much does caliche rock cost?
Caliche rock costs $45 to $100 per ton and $30 to $80 per cubic yard. A Caliche driveway costs $1.17 to $6.62 per square foot. Caliche can mean higher-quality limestone and calcite rock, like decorative Arizona gravel. Caliche is a natural stone that's grey or with pale salmon to pinkish-brown or reddish hues.
How much does crushed stone cost?
Bulk crushed stone and gravel prices are $10 to $50 per ton on average. Road base costs $18 to $30 per ton, and plain pea gravel or limestone costs $28 to $45 per ton. Buying gravel in small quantities costs over $100 per ton. It takes 1.4 tons of stone per cubic yard.
How many yards of crushed stone per 100 square feet?
Gravel can also be used as a base for roads, ground cover, or landscaping material. Estimate 3.7 cubic yards of crushed stone per 100 square feet of coverage 12-inches deep (cubic foot).
How much does it cost to haul a truck load of gravel?
A truck load of gravel costs $1,350 or more with a 10-yard minimum, including delivery and spreading based on the rock type, amount, truck size (double or tri-axle), and travel distance. Most rock-fill jobs use a 3-man crew plus a tractor for $46 per hour that spread 12 cubic yards per hour.
How much is a ton?
Depending on where you are in the world a ‘ton’ can mean: If you’re in the UK: A ton is approx. 1,016 kg. If you’re in the US: A ton is approx. 907 kg. And, if you say tonne or want a metric tonne: Then that’s 1,000 kg in the UK and US. To keep things simple, we have applied a value of 1,000 kg throughout this article whenever we mention ...
How much does pea gravel cost?
Pea gravel is sold in large bags and in kilograms with an average cost of £85.20 per 800kg. This type of gravel is more expensive than standard options but also more attractive.
What is gravel used for?
Gravel is a versatile and affordable material that has endless uses. Available in many colours and sizes, it can be used to emphasize or highlight garden landscaping and is great for plant drainage. Not only is gravel aesthetically pleasing, but it can also be used as a base for new patios and to create stylish driveways and paths.
How long does gravel last?
Long-lasting: Gravel has the potential to last for 100 years which is much longer than other driveway or path materials. Simple to install: Adding a weed-proof membrane is essential, however, once this is done gravel can simply be poured into the space.
What are the benefits of gravel?
Benefits of using gravel. With a fantastic range of colours, styles and sizes, gravel can accentuate any area of your property. From paths to flowerbeds and large driveways, there are a wide variety of uses. Furthermore, you can look forward to the following benefits:
What factors affect the price of gravel?
Factors affecting gravel cost. While gravel is sold in affordable bags, the following factors will influence the price you pay: Types: Base gravel, crushed stone and pea gravel are all types of gravel available to purchase. Each type will have a different price point.
Is gravel driveway better than concrete?
An alternative to concrete and slabs, gravel is easier to install and maintain. Furthermore, a well-installed gravel driveway can increase the value of your home and make an attractive entrance to your property. You can even combine it with lawn edging to create stunning features.
How many pounds are in a metric ton?
If you're in the US, divide 2295 by 2000 (there are 2000lb in a US ton). If you're in the UK, divide by 2200 (there are 2204.62 lb in a metric tonne)
How do I convert cubic yards to tons?
If you're attempting to calculate how many tons/tonnes of material to order based upon your cubic yard measurements, you'll need to carry out a conversion involving a density figure. This is because the cubic yard is a unit of volume and the ton (or tonne) is a unit of weight. To convert between the two, you'll need to know the density of the material. To give a crude example, the weight of a cubic yard of feathers will be much lighter than a cubic yard of sand.
What is mulch sand?
Mulch (woodchip) Sand (dry) Sand (loose) Sand (wet) Topsoil. It is important to note that if you choose to use the supplied list of approximations, you will get a rough estimate of the weight of materials. To obtain a more accurate conversion you should find out the exact density of the material you are measuring for.
Is a cubic yard a ton?
This is because the cubic yard is a unit of volume and the ton (or tonne) is a unit of weight. To convert between the two, you'll need to know the density of the material. To give a crude example, the weight of a cubic yard of feathers will be much lighter than a cubic yard of sand.
