Prices based on material
| Material | Cost per square foot |
| Hardie Board/Fiber Cement | $0.75 – $5 |
| Aluminum/Steel | $3 – $8 |
| Vinyl | $2 – $7 |
| Engineered Wood | $2 – $5.50 |
Full Answer
What is the average cost of board and batten siding?
Whether you’re looking to replace the existing or install a completely new board and batten siding, you will have to expect between $4,000 to $14,000. On average, a homeowner will pay around $9,000, a price that can vary significantly depending on material and location.
Is board and batten expensive?
Typical Cost of Board and Batten. The siding that comes from board and batten is a more expensive option, but how much of a difference is it to purchase and install board and batten siding materials. Well, having this siding installed can cost between around $4,000 up to $14,000. However, the average cost that most homeowners will likely pay is around $9,000 or just under $10,000.
How to set up board and batten or exterior siding?
- Working time 12 hrs
- Start to finish 24 hrs
- Difficulty Kind of Hard
- Involves Measuring, Installing Siding
Which is better vinyl or cement board siding?
Vinyl Siding
- Material and labor is less expensive
- No difference in resale value when comparing equal grade products
- Doesn’t need long term maintenance
- Repair costs can be more than fiber cement
- Repair costs for larger areas is less than fiber cement
How expensive is Board and batten vinyl siding?
Board and batten can range anywhere between $5 and $12 per square foot while horizontal vinyl siding usually costs between $2 and $6 per square foot. Remember that price can differ depending on several factors, so it's best to check with your local roofer to get a better idea of what it would cost for you.
Is board and batten siding more expensive?
Typical Cost of Board and Batten The siding that comes from board and batten is a more expensive option, but how much of a difference is it to purchase and install board and batten siding materials. Well, having this siding installed can cost between around $4,000 up to $14,000.
Does board and batten siding come in vinyl?
Board and batten siding comes in a variety of materials, as this exterior siding style is a practical and affordable choice for many different kinds of buildings, including homes. Board and batten can come in steel, wood, or vinyl.
How much does a Board and batten wall cost?
So if you want a rough estimate, you could consider $40 per 8 feet of wall if you follow a similar layout to my boards. To get a much more accurate cost estimate, you can quickly shop homedepot.com and see the actual total in your cart.
Is board and batten cheap?
Board and batten is one of the cheapest and easiest ways to makeover a room. With just a few materials and tools even a novice DIY'er can transform a room over a weekend. While there are so many different wall treatments out there that I love, board and batten is still my favorite.
Will board and batten go out of style?
I know, I know….”Board and batten is timeless…it will never go out of style.” Bull… hardwoods are timeless…but yet 40 years ago people covered them with wall to wall carpet.
Is vertical vinyl siding more expensive?
Ease of Installation and Cost When considering the cost of installation, vertical siding is more expensive and time-consuming to install than horizontal siding because furring strips are placed underneath first to ensure that the siding is aligned properly and smoothly.
Is there a vinyl board and batten?
With its unique vertical pattern, Board & Batten vinyl siding recalls the rustic charm of early American homes. Use it as a striking accent or on your entire house for a distinctive look.
Does board and batten siding leak?
It's made up of planks with vertical grooves which form an impenetrable wall to prevent leaks in harsh weather conditions like rain or snowfall. Weather-resistant – Board and batten are a great choice in climates where the weather can be harsh.
How wide is vinyl board and batten siding?
Board & Batten siding is available in 7” and 8” profiles, and features extra-thick construction with a natural woodgrain texture.
Does Home Depot install board and batten?
1:596:00DIY Board and Batten Wall with @Lone Fox | The Home DepotYouTubeStart of suggested clipEnd of suggested clipThen after we install our horizontal boards we're going to go back in and install our batten piecesMoreThen after we install our horizontal boards we're going to go back in and install our batten pieces which are. Vertical. So here we have all of our horizontal boards fully installed.
How do you calculate board and batten?
Take your total wall length and divide that by the approximate spacing you would like between the battens. That number will be how many spaces you have on your wall.
Board And Batten Vinyl Siding Cost (Material Only)
Entry To Mid Range Board And Batten Vinyl Siding Cost: $.75 to $1.50 per sq. ft. Expect to pay $75 to $150 per square for materials only.
Board And Batten Vinyl Siding Cost For Installation
Installation Price: $1.00 – $2.00 per sq. ft. Homeowners can expect typical installation costs to range from $1.00 and $2.00 per square foot. Hanging vinyl board and batten siding is on par with other vinyl cladding and does not involve any additional steps or complicated cutting tools.
Total Board & Batten Vinyl Siding Cost
Total For Entry To Mid Level Pricing: $1.75 – $3.00 per sq. ft. Expect to pay $175 to $300 per square for both material and install.
How much does it cost to install board and batten siding?
Installing new board and batten siding costs between $4,000 and $14,000, but most homeowners pay about $9,000 on average. Material boards cost between $0.75 and $10 per square foot. Including labor, the total cost to install board and batten siding averages $2.25 to $12.50 per square foot. This style of siding is characterized by a series of alternating board sizes. It allows for the natural expansion and contraction of your home, which can reduce cracking and other age-related deterioration.
How much does board and batten cost?
Board and batten materials normally cost between $0.75 and $10 per square foot. Many homeowners choose wood for their siding, but there are a variety of other options. Here's a look at other popular board and batten materials and their costs:
How to keep battens from deteriorating?
Seal your battens. Water can gather behind loose battens and cause deterioration. Run weatherproof exterior caulk along the inside edges of your battens to prevent moisture penetration. Be sure to seal the top of your board and battens as well.
What is clapboard siding?
Clapboard (Bevel) Clapboard is made from overlapping boards. This style of siding is common in classic and traditional homes. Wood is the most popular clapboard material, but it will come at a higher price than board and batten. The construction of clapboard can also make it an expensive wood siding.
What is shiplap siding?
Siding is made from panels that slide together. This type of siding is known for its smooth appearance. Unlike board and batten, shiplap is always made from wood and can deteriorate in extreme weather. Ship lap costs will vary, but it's generally considered a more affordable option.
How much does engineered wood siding cost?
Affordability, simple installation and durability make it a popular option for many homeowners. Expect to pay between $2 and $5.50 per square foot for engineered wood siding boards.
How much does cedar siding cost?
Cedar siding boards average $2.80 per square foot. It's warm looks and simple installation make it a popular siding option. This material is also easy to stain and has a natural resistance to insects and warping. You can expect to pay less for cedar than other types of wood.
Board And Batten Costs
Install Pricing: $1.50 – $2.50 psf Expect to pay between $1.50 and $2.50 per square foot for installation. It tends to be a bit more labor intensive as compared to vinyl siding, but is not as difficult to hang as hardie board.
Total Board And Batten Siding Cost
Totals On Entry Level Prices: $3.50 – $4.75 per sq. ft. Expect to pay $500 to $650 per square for the materials and install.
How much does vinyl siding cost?
For vinyl material, you will typically see a board and batten siding cost of anywhere between 2 and 7 dollars per square foot. This comes out to about $10,500 for a home of 1,500 sq ft. Wood such as Cedar and others will cost about $3 per sq ft and can cost anywhere from $7,000 to $10,000 for a 1,500 sq ft home, depending on labor costs.
What is batten siding?
Historically used on barns, this type of siding uses strips of narrow wood which are called battens. These batten boards are alternated with wider boards, creating a layered effect on your home. Many appreciate this unique style and thus choose board and batten steel siding over all others thanks to it's improved durability.
What is the fastest growing type of siding?
At the moment, Board and batten siding is one of the fastest-growing options for home siding.
How much does steel board siding cost?
Steel board and batten siding can be installed for around $3.50 to $4.50 per sq ft. Some companies like Trulog Siding will give you free shipping on orders of over $1,000.
Is board and batten siding good for resale?
A long lifespan is one of the main advantages of board and batten siding, with a properly cared for installation lasting years if not decades. Another benefit is that it will improve your resale value, thanks to the aesthetic value it adds to your home — especially when choosing a neutral tone such as white board and batten.
Can board and batten be installed vertically?
Board and batten is also versatile, able to be installed vertically, horizontally, or both. It’s also cheap to repair due to its use of individual pieces rather than large sheets of siding.
Is wood siding good for a house?
Wood. Wood siding is great for those who want the most natural, rustic look possible for their home. While it does provide great aesthetic value, it can be susceptible to disease, rot, and decay if moisture should find its way inside. Termites can also be a problem with this material.
How much does it cost to install vinyl siding?
The average cost to install vinyl siding on a single-story , 1,600 sq. ft. home is $4,800–$5,600, or $4.00 per square foot depending on the size of your home, number of stories, quality of siding, and the number of accent pieces. Higher-quality siding on the same house will cost between $10,200 and $11,100 or $6 .70 per square foot.
How much does aluminum siding cost?
Aluminum Siding – $4 to $7 SF - Since metal siding is malleable and can be bent on-site, almost any custom work can be done to accommodate for any irregularities on the exterior of the home. It can also be painted.
What are the different types of vinyl siding?
There are three main types of vinyl siding concerning its visual appearance—vertical, horizontal, and shake. Within these categories you’ll find beaded, board and batten, clapboard, Dutch lap, traditional lap, log, scallops, and shingle styles, among others, each creating a different look for your home.
What is clapboard made of?
Clapboard - Known for its distinctive look from overlapping boards, this is now made from vinyl and finished to look like wood, which adds a heritage look to a home. And a style of clapboard, Dutch Lap, is engineered to have the look of wood siding hand carved by craftsmen, creating an old-world look for your home.
How long does vinyl siding overlap?
Seams will always be visible when vinyl is the siding material used. The most common vinyl siding panels have a standard length of 12 feet, and they will always overlap because of this. Longer panels show fewer visible seams but are generally 25% to 30% more expensive than the standard-sized siding panels.
How long is a standard length of vinyl siding?
This option also is known to help prevent drafts in your home. Shipping and Installation – Vinyl siding panels are generally sold in standard lengths of 12 feet and are very light compared to other options for residential exterior siding. Being lighter, they are cheaper to ship.
Why do you need to clean vinyl siding?
In most cases, the need to clean vinyl siding is because of the growth of mold or mildew on the surface of the vinyl. It’s very possible to create affordable, homemade vinyl siding cleaners out of varying mixes of water and vinegar, bleach, or laundry detergent.
