What is the X3 knee?
The X3 is the most durable, intuitive and technologically advanced microprocessor knee on the market. With features that support activities like running, swimming and ascending stairs step-over-step, X3 supports individuals who push the boundaries of mobility.
What is the Genium X3?
The Genium X3 maintains a four-degree preflexion of the knee joint at heel strike. This dampens impact and allows the foot to achieve full contact with the surface more quickly. Adaptive Yielding Control.
Where can I find Ottobock?
Ottobock is present in 3 cities in Poland. Phone+48 61 653 82 50 Fax+48 61 653 80 31 [email protected] spokenPolish, English Romania S.C. Otto Bock Romania S.R.L.Sos.de Centura ChitilaMogosoaia Nr. 3, Parter RO-077405 Chitila, Jud.
What does the X3 have to offer?
The new X3 allows you to check the battery charge level or quickly activate your personal pre-settings, via the Cockpit app for iPhone and Android devices. Whether you’re running to catch the bus or keeping up with your kids: The walk-to-run function lets you change speeds spontaneously for short sprints.
How does the X3 work?
What controls the X3?
What does vibration signal mean on X3?
What is walk to run on X3?
Can the X3 be used with the Cockpit app?
Is the X3 waterproof?
Does the X3 have a long term effect on movement?
See 2 more
How much does the X3 prosthetic leg cost?
Price. According to our information, the Genium X3 typically sells for more than $100,000 US including the socket, prosthetic foot, and all prosthetist fees.
How much does the ottobock C leg cost?
between $40,000 and $50,000 USPrice. According to our information, the C-Leg sells for between $40,000 and $50,000 US including the socket, prosthetic foot, and all prosthetist fees.
How much does a Genium knee cost?
between $60,000 and $80,000 USAccording to our information, the Genium knee typically sells for between $60,000 and $80,000 US including the socket, prosthetic foot, and all prosthetist fees. For a complete list of prices for other microprocessor knees, please see our Microprocessor Knee Price List.
How much does a carbon fiber prosthetic leg cost?
The cost for a prosthetic leg is usually less than $10,000 for a basic leg and upwards of $70,000 or more for a computerized leg that you control via muscle movement. That cost is just for one leg, so if you want another one to use for other purposes, you will likely need to pay for the additional prosthetic.
What is the best below knee prosthetic leg?
Liner with pin lock for below the knee prosthesis Usually, the silicone liners are the best but you can also choose from the gel and hybrid materials, as per your suitability. These liners are best for the cylindrical shaped limbs.
How much does ottobock cost?
Ottobock Functional Prosthetic Above Knee Prosthesis, Full Leg, Rs 85000 | ID: 20483405530.
What is the best prosthetic leg on the market?
The Genium X3 Knee is the most advanced bionic knee on the market. It is also waterproof, dustproof, and highly resistant to corrosion.
What are the newest prosthetic legs?
The Ottobock C-Leg is the original microprocessor knee. Since its launch in 1997, the C-Leg has set the standard for every other knee available, and is the world's most studied prosthetic device. Our research proves that with C-Leg, you will experience less falls.
How much does an above the knee prosthetic leg cost?
How much does it cost to get a prosthetic leg? Depending on if it is a below the knee prosthetic or above the knee prosthetic the cost can be anywhere between $6500 and $75,000.00.
How much does a 3D printed prosthetic leg cost?
Successes of 3D Printed Prosthetics According to a statement made by the American Orthotics and Prosthetics Association, the average prosthetic costs between $1,500 to $8,000.
How can I get a free prosthetic leg?
Amputee Blade Runners is a nonprofit organization that helps provide free running prosthetics for amputees. Running prosthetics are not covered by insurance and are considered “not medically necessary,” so this organization helps amputees keep an active lifestyle.
How long does a prosthetic leg last?
Your prosthetist might recommend adjusting your current equipment or replacing one of the components. Or you might get a prescription for a new prosthetic leg, which happens on average every three to five years.
What is the best prosthetic leg?
C-Leg® above knee prosthetic leg The Ottobock C-Leg is the original microprocessor knee. Since its launch in 1997, the C-Leg has set the standard for every other knee available, and is the world's most studied prosthetic device.
How much does a microprocessor knee cost?
How Much Do Microprocessor Knees Cost? The simple answer is $20,000 to $100,000 US plus. The prices of most microprocessor knees are dictated by Medicare/Medicaid reimbursement rates, which is why there are so many knees in the $30,000 to $50,000 US range.
How much does an above the knee prosthetic leg cost?
How much does it cost to get a prosthetic leg? Depending on if it is a below the knee prosthetic or above the knee prosthetic the cost can be anywhere between $6500 and $75,000.00.
How much does C-leg weigh?
Product DataArticle number3C88-3=8.5-23C98-3=9.2-2Weight (without tube adapter)1255 lbs1,250 lbsMax. body weight300 lbs300 lbsColorMidnight ShadowDesert pearlMinimum distal system height with 257/2R67 tube adapter289 / 329 ″289 / 329 ″11 more rows
Overview
The X3 is the most durable, intuitive and technologically advanced microprocessor knee on the market. With features that support activities like running, swimming and ascending stairs step-over-step, X3 supports individuals who push the boundaries of mobility.
Accessories
Waterproof above-the-knee adapter that allows the flexed lower leg to be easily rotated out of the way.
What is the Ottobock app?
Ottobock provides a software application for users to manage some of the Genium X3’s settings. The app is called Cockpit:
What is the X3?
The X3 also offers different modes for specific activities such as bicycling, running, etc. The entire system is designed to relieve the user of the need to micromanage their prosthesis, which makes it much less tiring. This alone can have a significant impact on the quality of life.
What is Genium X3 knee?
The Genium X3 Knee is the most advanced bionic knee on the market . Sophisticated sensor and microprocessor technologies make navigating challenging terrains routine. Fully waterproof and highly resistant to dust, dirt, and corrosion, it is also ideal for outdoor activities.
How long does a Genium X3 battery last?
The Genium X3’s battery can last for up to five days, though Ottobock recommends charging the battery each night.
How much does a Genium X3 weigh?
The Genium X3 weighs 1.7 kilograms. The maximum allowable user weight for the knee is 125 kilograms.
How long can a Genium X3 submersible be in salt water?
The Genium X3 has an IP rating of 68, meaning it is fully submersible in both fresh water and salt water up to three meters for as long as 60 minutes, as you can see in this video:
Is Genium X3 overkill?
It is likely overkill for less active users. As for price, not many people have $100,000 US plus to spend on a bionic knee. But if you can afford the Genium X3, its benefits are undeniable, especially in challenging terrains, outdoor environments, and during sporting activities.
Where is Ottobock located?
Ottobock is present in 3 cities in Poland.
What is Ottobock's work in North America?
Againstthis backround, Ottobock’s work in North America is defined by investments in technology, cooperation with renowned research institutions and strategic partnerships with customers. Ottobock USA was the first foreign branch founded by the company, later followed Canada. Western Europe.
What is the goal of Ottobok?
Our goal ist to use our expertise, commmitment and outstanding products so we can deliver end-to-end solutions that enable us to create more opportunities for social integration.
What is Ottobock's role in EEMEA?
Inspired and motivated by cultural diversity, the different business environments and incredible potential oft he EEMEA region, Ottobock works closely with varioua interest groups to offer the best possible treatmentstabdards and outstanding service for patients and business partners.
Is Ottobock Genium waterproof?
The Ottobock Genium is also considered weatherproof, but not completely waterproof. It has an IP54 rating, which indicates that it is for the most part protected against penetration of dust, however, large quantities of dust may trigger complications. It also indicates that it is protected against splashing water, as is the Rheo Knee 3 and Rheo Knee XC. A bit of rain is nothing to worry about, but the Genium will be at risk of damage if it is submerged or sprayed with any hose or jet and most certainly should not come into contact with any soapy, salty or chlorinated water. If it does, it should gently be rinsed with freshwater, but may also need to be inspected by Ottobock technicians in Germany to make sure everything is still running smoothly.
Can Ottobock genium knees be submerged?
This means it can is 100% protected from penetration of dust and can be submerged in water at least 1m deep for over 30 minutes and still remain operational at the same time. Furthermore, unlike other microprocessor knees, its parts have been designed with a corrosion resistant coating which allows it to be used in salt water and chlorinated water as well as fresh water, making it perhaps the most versatile of microprocessor knee units. However, it is still always recommended that the knee be rinsed off with fresh water after being exposed to salt water or chlorinated water. It also must be recognised that while this IP rating permits the knee unit to be submerged in water, it does not guarantee that water will not be able to penetrate into the inner workings of the knee unit when projected in powerful jets or hoses.
How does the X3 work?
As a result, it lets you change walking speeds, use stairs step-over-step, overcome obstacles safely, stand in a relaxed position on inclines and walk backwards.
What controls the X3?
The hydraulic unit controls the X3. The flexion and extension resistances are controlled independently by means of two control valves.
What does vibration signal mean on X3?
Vibration signals warn you in a timely manner when the battery charge level becomes critically low. Once it is drained entirely or if the power supply fails, the X3 automatically switches to safety mode.
What is walk to run on X3?
Whether you’re running to catch the bus or keeping up with your kids: The walk-to-run function lets you change speeds spontaneously for short sprints. An additional running mode for longer distances was developed especially for sports activities with the X3.
Can the X3 be used with the Cockpit app?
The X3 can be configured with the Cockpit app for Android was well as Apple (iOS) devices.*
Is the X3 waterproof?
Special materials, coatings, and components protect the electronics. The joint is waterproof (even when exposed to strong jets of water) and corrosion-resistant.
Does the X3 have a long term effect on movement?
Studies prove that providing targeted relief for the contralateral side also has long-term health benefits. Particularly robust materials allow even more freedom of movement, including in wet and harsh environments. You can focus on the important things in life, rather than having to think about every step.
What’s on This page?
A Quick Look at The Genium X3
Genium X3 Key Features
User Feedback Survey & Results
Considerations Before Buying A Genium X3
- The main considerations when considering the Genium X3 are its intended use and price. Regarding intended use, active K3/K4 users are the ones most likely to fully utilize the Genium X3’s features. It is likely overkill for less active users. As for price, not many people have $100,000 US plus to spend on a bionic knee. But if you can afford the Ge...
Related Information