To power wash, stain, and seal your deck, expect to spend between $0.50 and $1.50 per sq. ft. or $0.95 per sq. ft. on average.
Full Answer
What season is the best to pressure wash a deck?
How much should I charge to pressure wash and stain a deck? How Much To Charge To Stain A Deck? Contractors typically charge $1.00 to $2.50 per square foot to stain a deck depending on the process. For power washing, sanding, stripping, staining, and sealing contractors charge $2 to $4 per square foot. Click to see full answer.
When is the best time to pressure wash your deck?
Dec 01, 2021 · For a basic project in zip code 47474 with 500 square feet, the cost to Pressure Wash Deck starts at $0.39 - $0.47 per square foot*. Actual costs will depend on job size, conditions, and options. To estimate costs for your project: 1. Set Project Zip Code Enter the Zip Code for the location where labor is hired and materials purchased. 2.
What is the best deck wash to use?
The average cost to power wash a deck ranges from $119 to $244 with most homeowners paying around $0.35 per square foot. To power wash, stain, and seal your deck, expect to spend between $0.50 and $1.50 per sq. ft. or $0.95 per sq. ft. on average.
What is the best pressure washer for deck cleaning?
Jan 27, 2022 · Here are costs for the equipment and supplies needed to pressure wash and stain your deck. $28 – $45 for Electric / $50 – $80 for Gas | Pressure Washer Rental per Half-day and Full-day. $265 – $725 | Residential-grade gas-powered pressure washer for those that want to purchase their own.
How much does pressure washing cost?
Pressure washing takes longer, and it costs $0.08–$0.20 per square foot.
How much does it cost to pressure wash concrete?
A simple pressure washing of concrete runs from $0.08 to $0.20 per square foot. It goes up from there—if the pavement is greasy and requires power washing (the addition of hot water) plus a concrete detergent, it will cost $0.25 to $0.35 per square foot. The concrete detergent breaks up the dirt, grease, and oil and makes ...
How long does it take to power wash a house?
It takes a professional 2.3 hours on average to power wash a house and siding. Pricing depends on the degree of safety precautions required for the job (such as a steep roof). Quality pressure washing companies will be licensed, insured, and bonded.
How much does it cost to power wash vinyl siding?
For a single-story home with vinyl siding, power washing rates range from $90 to $248 depending on the size of your home. Contractors typically charge $0.29 to $0.35 per square foot, and prices go up if there are more than one-story, because more pressure is needed if ladders aren’t used. A pressure washer brush helps to clean the surface of debris faster.
How much does it cost to power wash a roof?
Power washing a roof costs $172 to $268 on average and can be completed in about 3 hours by a professional. A cedar shake roof can be pressure washed for $0.60 to $0.90 per square foot or $400 to $800 per roof, while a composition roof will be less at $0.10 to $0.30 per square foot.
What is the difference between power washing and pressure washing?
Both power washers and pressure washers use strong streams of high-pressure water to clean surfaces, but power washing has the added element of hot water instead of cold. Soft washing is another type of cleaning that uses eco-friendly cleaning products and water at low pressure.
How much does it cost to rent a pressure washer?
The cost to rent a pressure washer ranges from $76 to $180 per day with most spending between $90 and $120 per day depending on the size and whether its gas or electric.
Average Cost of Deck Staining and Painting
Expect to pay about $3.20 per square foot to have your deck power washed and stained or painted. If it is in excellent condition, cost might be a little lower. When more prep is needed or minor repairs have to be made, cost will be on the upper end of the range. About 70% to 90% of the cost is in painting or staining.
Overview of Pressure Washing and Deck Staining
Removing dirt from the wood grain with pressure washing, aka power washing, let’s penetrating stain work deep into the wood to protect and beautify. The combination improves the looks of the deck and its durability. Depending on the aesthetics of your home, paint might be a preferred option.
Product and Installation Supplies Cost Details
Our cost range of $2.15 to $4.25 per square foot would yield estimates of $516 to $1,020 for a 12’ x 20’ (240 square foot) deck. That’s quite a range. Using HomeGuide’s numbers, the cost is a little lower at $360 to $960. The Homewyse estimate is more in line with ours at $495 to $1,185.
Cost of Various Deck Repairs & Supplies
Here are costs for the equipment and supplies needed to pressure wash and stain your deck.
Deck Repair vs Deck Replacement
Deck repair costs quite a bit more per square foot than building a new deck.
DIY or Hire a Pro?
This outdoor home project requires basic skills if the deck is in good condition, and moderate skills if minor deck repair is required.
What is the best stain for decking?
Commonly Deck stains come in water-based and oil-based options. Oil-based stains are more commonly used, as they penetrate deeper into the wood and provide a richer look. Oil-based stains do take longer to dry than water-based stains, which is something to consider in choosing when to stain your deck.
How much does it cost to rent a pressure washer?
Renting a pressure washer will cost around $50 – $60 for four hours or around $80 – $100 per day. A refundable deposit is also required for rental.
How Much Does It Cost to Stain a Deck if You Do it Yourself?
This also depends on whether you own (or can borrow) equipment like a power washer and sander, as well as what type of stain you choose. Generally speaking, estimate that the worse the condition of your deck the more you’ll save, as the labor is "free".
Average Cost to Seal a Deck
How much does it cost to hire a pro to just seal a deck? Stain is usually a little more expensive than sealant because stain contains pigmentation that provides protection against sun damage and also allows you to change the coloration of your deck.
How much does it cost to stain a deck?
On average, staining solution for a wooden deck ranges between $20 and $120 per gallon depending on its quality. Look for stain that penetrates the wood deeply, which likely costs at least $30 to $40 per gallon.
How much does it cost to rent a pressure washer?
Renting a pressure or power washer can cost around $50 to $65 a day. You can buy your own equipment at $100 for a low-end model or more than $1,500 for a top-end model. Hiring a professional power washer costs between $185 and $380.
What is the difference between stain and sealer?
What's the Difference Between Staining, Sealing and Waterproofing? 1 Stains can finish your deck and make it look great. 2 Sealers work by penetrating the wood to protect it from rot-causing moisture. They still allow normal humidity to enter and leave over the course of the day. 3 Stains and sealers may provide some waterproofing, but a separate coat protects better against mold and mildew.
How long does it take to sand down a deck?
Sanding down your deck's old finish also costs $50 per hour, but only takes 5 to 10 hours. This is the more common option to remove paint and finish, and usually gets the job done well enough that the new stain shows the right color.
What is wood stain made of?
Wood stain is made up of pigment (the color medium) in a carrier with a binder (alkyd, oil or resin) that binds the pigment to the lumber. The binder makes it possible for the pigment to penetrate the small openings left as the surface dries. You can choose from several types of solutions: Type. Price. Best For.
