Full Answer
What size bathtub do I need for my Space?
In this brief article, we will discuss the minimum installation space requirements, which translates to the right size bathtub for the space. As a rule of thumb, the minimum end-to-end (length) additional space you'll need for a clawfoot, pedestal, or freestanding tub is 6 inches.
How far should a hot tub be from the property line?
In some areas, including Minnesota and California, you must set the tub back at least 5 feet from your property line. For an above-ground hot tub, measure from your property line to the edge of the tub's structure. If your hot tub will have its top flush with the ground, measure the tub as you would a swimming pool.
What are the electrical requirements for installing a hot tub?
What are the Electrical Requirements for hot tub installation? Hot tubs either require 110V or 220V of electricity. If you choose a 110V model— often referred to as “plug-and-play”—then you may be able to simply plug the spa into an electrical outlet in the backyard.
How big is a cozy hot tub?
Let’s look at three possible sizes. Firstly, a small cozy hot tub for 2 – 4 people. These are around 180 cm x 180cm ( 5 feet 10 inches x 5 feet 10 inches).
How much space do I need to leave around a hot tub?
Space. There must be enough room not just for movement or getting in and out of your tub, but also for maintenance. You'll need to choose a location that allows for easy access to the inner workings of the hot tub. We recommend leaving at least 30 inches around all sides and back panels of the hot tub.
How close to a house can you put a hot tub?
Proximity to the house. To reduce the risk of electrocution, place your tub at least 16 feet away from overhead power lines. To protect your home and outbuildings from potential flooding, keep it at least 5 feet from any structure.
How much space do you need for a 6 person hot tub?
You can expect a 6-8 person hot tub to take up an area of 80-90+ square feet and require as much as 600 gallons of water to be filled.
How much access do you need for a hot tub?
The average size of a standard hot tub is approximately 2m square, allowing some space around the hot tub is advisable. We often recommend that you use a patio table and chairs to position where you think the hot tub would go to get a feel for the vol-ume of space required.
Where is the best place to put a hot tub?
Your hot tub can be placed just about anywhere—outdoors or even indoors when practical. You can put it on a deck, patio, rooftop entertaining area, or even under a gazebo. The perfect spot for your hot tub all depends on your home and landscape design and layout, as well as your personal tastes.
Do I need a concrete slab for a hot tub?
A hot tub does not have to sit on concrete and can be placed on any stable, level surface that will not become unstable due to moisture or weight. Those surfaces include wooden decks, paver stones, gravel beds, or spa pads.
Do you need access to all sides of a hot tub?
Hot tubs need a minimum of 18 inches of access around all four sides so repair technicians can replace fuses, service the heating elements, and clean out debris from clogged jets. Some hot tub models are carefully designed so that only one or two sides require access for maintenance.
Can I put a hot tub on my deck?
Yes, you can put a hot tub on a deck. Decks built ground level up to 2 feet off the ground can support up to 100 lbs per square foot; sufficient for most hot tubs. But decks 2 feet or higher will need added support. The added support posts should be no more than 30″ apart & ideally placed in poured concrete.
What is the footprint of a hot tub?
Choosing a Hot Tub Based on SizeHot Tub Size RangesLengthWidthSmall (2-4 people)5'4” - 7”5'4” - 6'8”Medium (5-6 people)6'6” - 7'9”6'4” - 7'9”Large (7+people)7' - 9”7' - 9'2”Apr 25, 2018
How far does a Socket need to be from a hot tub?
In order to meet the zone requirements, the socket-outlet or isolator needs to be mounted 2 m away from the edge of the tub, as illustrated in Fig 3. Most plug-and-play tubs come with an ample amount of flex, allowing for this separation distance.
How do you put a hot tub in your backyard?
Installation InstructionsHave Your Hot Tub Delivered to Your Home. Most retailers will deliver your new hot tub directly to your home. ... Place and Position the Hot Tub. ... Assemble the Hot Tub. ... Fill your Hot Tub. ... Turn on Your Hot Tub. ... Add Sanitizing Chemicals. ... Enjoy Your New Hot Tub.
Can you lift a hot tub over a fence?
If we just need to lift the hot tub over a fence or bush/trees and can park a vehicle on the other side, then a HIAB crane may be just the trick. This is a truck with a small crane on the back, and can be considerably more cost effective than a full size crane.
Hot tub side clearance
The dimensions of your hot tub are only part of the equation when working out how much clearance is necessary.
How close can a hot tub be to a house?
In most cases, having your hot tub butted right up against the wall of your home is too close. The steam from the water may seep into the windows and the surrounding area can become dangerously slippery.
Where should I put my hot tub?
A hot tub can be placed anywhere (indoors or outdoors) where there is a solid, level surface with a nearby water and electrical supply. Hot tubs can sit on firm foundations such as concrete, decking, patios, or gravel. The ideal location has easy access, privacy, shade, and no wind.
How much does an empty hot tub weigh?
An empty hot tub is already a heavy object, hovering around the 850-pound mark. Add in 400 or so gallons of water, which can weigh about 3500 pounds and another 1000 pounds or so from the weight of bathers in the hot tub, and suddenly you have an object well over 5,000 pounds that needs to be properly supported.
How thick should a hot tub block be?
It is recommended that blocks be at least 3 inches thick. Now that you know if you have enough space for your hot tub, click here to download a hot tub buyer’s guide.
How thick should a block be?
It is recommended that blocks be at least 3 inches thick.
How much electricity does a hot tub use?
Hot tubs either require 110V or 220V of electricity. If you choose a 110V model— often referred to as “plug-and-play”—then you may be able to simply plug the spa into an electrical outlet in the backyard.
Do you need concrete for a hot tub?
A level concrete pad or a reinforced deck are the most common surfaces hot tubs are installed on. However, depending on the spa model you use, you may not need to pour concrete. A level pad built of stone pavers, a composite slab made of wood and gravel, or a modular spa pad made of heavy duty plastic may also be good options. ...
Do hot tubs need plumbing?
Some people think that hot tubs require plumbing—but that is not the case! A hot tub, or portable spa, is a completely self-contained vessel designed to provide you with amazing hydrotherapy benefits. Once installed, you simply fill your spa with a garden hose.
How far back do you have to set a hot tub?
In some areas, including Minnesota and California, you must set the tub back at least 5 feet from your property line.
Why do people soak in hot tubs?
Soaking in a delightfully warm hot tub can provide calming respite from an exasperating day. The tub's hot water and targeted jets help soothe too-tight muscles, reducing stress and preparing your body for a good night's sleep, reports Hot Tub Guide.
How much concrete should I use for a slab?
If you go that route, use a 4-inch-thick reinforced concrete base that can support 120 pounds per square foot. If concrete is not feasible, crushed gravel or rock will work.
Do you need a water source for an outdoor hot tub?
Consider Your Water Source. To fill your outdoor hot tub, you don't need special plumbing fixtures or a dedicated water source. A sufficiently long garden hose, a reliable water supply, and plenty of patience are the only tools you need.
Do you need a fence around a hot tub?
Many building authorities require fences or other approved safety barriers around outdoor hot tubs. Fence requirements are similar to those of pool enclosures. Some local codes may allow approved hot tub covers to serve as safety barriers.
How big of a tub should I put in my bathroom?
Interior design guidelines and opinions typically recommend placing as large a tub in your bathroom as the space allows, however there are limits; the tub and tub-surrounding area should consume roughly 30%-40% of the total square footage of your bathroom. 54" Tubs for 60" Spaces. 60" Tubs for 66" Spaces. 66" Tubs for 72" Spaces.
How much space do I need for a claw foot tub?
As a rule of thumb, the minimum end-to-end (length) additional space you'll need for a clawfoot, pedestal, or freestanding tub is 6 inches. Any less and the tub will look cramped in the space. For tubs with drains at the end, you'll need a minimum of 4 inches for the floor-mount faucet, with 2 inches padding on the opposite end (as shown).
Do freestanding tubs belong in Temples of Bathing?
Life is too short to worry about somebody else's sense that freestanding tubs belong only in giant Temples of Bathing, with nothing on any side. It's your money and your room.
Is the bottom of a tub tapered?
the bottom of the tub is very tapered. it the back I would think would be hard to clean if you can figure that out I would go for it.
