how much would a 8x10 deck cost

Full Answer

How much does it cost to build a 8x10 deck?

Doing it yourself, you can build an 8x10-foot ground-level deck from treated lumber for about $500 in materials. Having a contractor build it for you raises the price to $1,500. You could build a treated-lumber raised deck, say 10x16 feet, for about $1,500 in materials. Beside above, how much does it cost to build a 12x12 deck?

How much would it cost to build a 8x10 room?

The average cost to build a sunroom ranges from $35,000 to $55,000. The average homeowner spends around $45,000 on a 14' x 14’ three-season sunroom, vinyl floor, painted walls, outlets and lighting, windows, and sliding door. Costs can be as low as $8,000 for a prefabricated 8’ x 10’ sunroom of the same size or as high as $90,000 for a ...

How much does it cost to build a small deck?

How much does it cost to have a deck built? A deck costs $15 to $47 per sq.ft. fully installed, depending on the style and materials. The average cost to build a deck is $5,500 to $16,000. Do I need a permit to build a deck? Most areas require a permit to make any addition to your home. Decks fit the definition of an addition in most areas.

What is the average cost to build a deck?

The national average ranges from $5,500 to $16,000, with most people paying around $12,600 for a 320-square-foot deck made with composite decking material. At the lowest costs, you can build a 100-square-foot deck using pressure-treated pine for $2,200.

How much does a 10 foot by 10 foot deck cost?

The average homeowner spends $2,200 to build a 10x10 foot deck, $6,160 to build a 14x20 deck, and $8,800 to build a 20x20 deck. The cost to build a deck with pressure-treated wood, hardwood, or composite is about $25 per square foot, for both materials and installation.

How much does it cost to build a 8x8 deck?

8x8-foot Raised Deck: Doing it yourself, you can build an 8x8-foot raised deck attached to your home, using treated lumber, for about $1,300 in materials. Changing the decking material to red cedar would raise the cost by approximately $700. Having a contractor build it for you raises the price from $3,200 to $4,800.

How much is labor for a 10x10 deck?

The labor cost to build a deck runs, on average, $15 – $35 per square foot.

How much should a 10x12 deck cost?

Deck Cost Estimator by SizeDimensionsTotal Square FeetAverage Price Range12 x 12144$5,760 – $8,64010 x 20200$8,000 – $12,00012 x 20240$9,600 – $14,40014 x 20280$11.200 – $16,8004 more rows

What is the cheapest way to build a deck?

Choose wood, but carefully: Untreated wood decks are generally the cheapest to install, but don't forget long-term costs. Wood decks require yearly maintenance and deteriorate quickly if they don't get it.

How many posts do I need for a 8x10 deck?

You will need six 4-by-4 or 6-by-6 pieces of lumber for the posts and four 2-by-10 pieces of lumber that are at least 10 feet long. The latter will combine to make up the two large beams to support the deck. You will also need eight 2-by-6 beams for your joists, which have to be at least 8 feet long.

Does a deck add value to your home?

Building a deck is a practical, reliable, and cost-effective way to increase your home value. Research shows that a homeowner can recoup over 75% of return on investment (ROI) by adding a deck to their home. Building a deck allows you to add outdoor living space to your home.

What is a good size for a deck?

A small deck intended to hold a round dining table should be at least 12 feet by 12 feet, while a large deck can be designed with much more space. The average deck size is between 300 and 400 square feet. Generally, a deck should be wider than it is deep, with the longer dimension running along the house.

Is Trex cheaper than wood?

“Wood decking can be more expensive than composite in the long run,” says Trex's Adkins, “once you account for the annual time and labor costs required to sand and stain a wood deck and railing.” Maintenance on a composite decking is minimal, which is one of the material's main selling points.

How much does a deck cost 2022?

Chris Morrison of Walker Lumber estimates that in 2022, you can expect a materials cost of $12 per square foot for a pressure-treated wood deck. A 10-foot by 10-foot deck, at that rate, would cost around $1,200, plus labor.

Is a deck a good investment?

Adding a deck to your home is one of the best investment decisions you can make. According to Remodeling Magazine's Cost Vs. Value Report, a homeowner can expect to recoup about 65% of the cost of building a new composite deck when the time comes to sell your home.

How do you estimate a deck?

How to Calculate How Much Decking I NeedStep 1: Determine your deck's square footage.Step 2: Decide which board length to use.Step 3: Determine board square footage.Step 4: Divide deck square footage by board square footage.Step 5: Determine deck board spacing square footage.More items...•

What do I need to build a 8x8 deck?

8×8 Deck PlansA – 2 pieces of 4×6 lumber – 96″ long BEAMS.B – 2 pieces of 2×6 lumber – 96” long, 9 pieces – 96” long JOISTS.C – 17 pieces of 5/4×6 lumber – 96” long DECKING.D – 3 pieces of 1×2 decking – 97 1/2” long TRIMS.E – 2 pieces of 2×6 lumber – 96″ long, 9 pieces – 9 3/4″ long STEP.More items...

How much does a new deck cost 2022?

Chris Morrison of Walker Lumber estimates that in 2022, you can expect a materials cost of $12 per square foot for a pressure-treated wood deck. A 10-foot by 10-foot deck, at that rate, would cost around $1,200, plus labor.

What is the average labor cost to build a deck?

The average labor cost to build a deck is between $8 and $22 per square foot. This makes up about half the total deck cost per square foot. At that rate, you might consider making your deck project a DIY.

How much does it cost to build a 12x12 composite deck?

Cost to Build a Deck by SizeSizePressure-treated wood Average cost per sq ftComposite decking Average cost per sq ft10x20$1,300$2,80012x12$936$2,01612x20$1,560$3,36014x20$1,820$3,9203 more rows

How much does it cost to build a 20' x 20' deck?

A 20’ x 20’ is 400 sq.ft. Depending on the style and materials, this has a cost range of $15 to $47 square feet or $6,000 to $18,800.

How much does it cost to have a deck built?

A deck costs $15 to $47 per sq.ft. fully installed, depending on the style and materials. The average cost to build a deck is $5,500 to $16,000.

Do I need a permit to build a deck?

Most areas require a permit to make any addition to your home. Decks fit the definition of an addition in most areas. Your contractor or builder ca...

What size deck should I build?

A 16’ x 20’ deck is a popular size for many homes. However, larger houses might benefit from a bigger deck, and a smaller home may require a smalle...

How much does it cost to build a 10' x 16' deck?

A 10’ x 16’ deck is 160 sq.ft. The cost of construction averages between $15 and $47 a square foot, depending on the materials and style. For a 160...

Does adding a deck add value?

In most areas, yes decks can add a lot of value to your home. Decks enhance your enjoyment of the yard and can be used as an outdoor living area. W...

How long does a deck last?

Decks have varying lengths of longevity due to the different materials they can be made of. In addition, one that is well cared for, stained, and s...

How long does a deck last?

A well-made deck can last for years. An 8-by-10-foot deck can be a great place to relax, grill and entertain in your back yard, without having your guests walk all over your lawn. If you have a little experience with a hammer, saw and drill, building a deck can be a fun weekend project.

How many 2x4 lumber for a deck?

You will also need eight 2-by-6 beams for your joists, which have to be at least 8 feet long. Finally, for the decking surface, you will need 35 2-by-4 pieces of lumber that are at least 8 feet long.

How many holes are there in a deck?

There will be six holes, 8 inches in diameter and 12 inches deep--or deeper, depending on the height of the deck. Each hole will require a 60-pound bag of concrete mix. You will also need some water available to wet the concrete. Advertisement.

What are the connectors on a beam?

The connectors have the task of holding the beams to the posts and the joists to the beams. All connectors have to be made from galvanized metal or stainless steel to protect them from rust. You will need six 3 1/2-inch post anchors, or 5 1/2 inch ones of you are using 6-by-6 posts, four 8-inch angle brackets for the corners, and 12 2-by-6 joist hangers.

How Much Does a New Deck Cost?

The average deck that most homeowners construct is 10×12 or 120 sq.ft. A low budget deck of this size made of PT wood costs an average of $2,400.

How much does a deck cost per square foot?

Across the US, the average deck cost per square foot ranges from $20 to 40. depending on the material you install.

How long does a PVC deck last?

Hence, its on the highest end of the price spectrum. A state-of-the-art synthetic deck can last 40 years or more.

Which is better, PVC or composite decking?

If you are not into spending a lot of effort on upkeep, then PVC (A ZEK) or composite decking is a better choice. These require almost no maintenance, just occasional washing to keep it looking nice and clean.

How much does a deck permit cost?

Depending on your local town regulations, a building permit for a deck can cost anywhere from a few hundred to almost $1,000. The design of you deck will have the biggest overall impact on the total cost.

Why is it not smart to spend money on a deck?

If you don’t have a high-end home, spending thousands of dollars on a fancy deck may not be financially smart, because you will not be able to recoup your investment. Instead, think of a size and design that will be a happy medium between your budget and entertainment needs.

How much does it cost to grade 120 sq ft?

The average price to grade 120 sq.ft of land is $800-1,150, or $6.6 – 9.5 per square foot. Another hidden expense that most homeowners forget to include is the cost of a building permit.

How much does an 8x10 deck cost?

A deck measuring 8’ x 10’ or 80 sq.ft. in total ranges from $1,120 to $3,520. At the lowest end, this assumes either a platform deck or a very simple raised deck made of pressure-treated wood. At the highest end, this assumes a deck made of either metal or very high-end exotic hardwood 2 with a roof. Decks this size are small enough to be added nearly anywhere on a house or in a yard.

How much does composite decking cost?

Composite decking, costing $8 to $15 a square foot, is easier to work with and may have lower labor costs. The average cost per square foot to build a deck is between $14 and $44, depending on the material, deck type, and geographic location.

What is composite decking?

Composite decking refers to any blend of materials that may include plastic, wood, wood pulp, fiber cement, or vinyl in a deck plank or railing. Composite decking is made to look like wood decking but does not require the same level of upkeep. Some composites are water-resistant, while others may swell when not installed properly. Some get very hot underfoot, while others stay cool. But most composite decking is easy to install and can last for years with little-to-no maintenance. Expect to pay $8 to $16 a square foot, depending on the material.

Why do decks cost more per square foot?

Decks have a range of building costs per square foot. This is because it can be made out of many materials. Various materials have different costs, and some materials can be more difficult to work with than others. This can make the cost to build a deck cost more in labor.

What is fiberglass decking?

Fiberglass decking is a subtype of composite decking. The decking is a blend or composite of materials. Sometimes, the materials are used throughout the plank. At other times, the core is made of a wood-pulp blend, while the exterior wrapper is something more durable. Fiberglass decking contains fiberglass particles in the outer wrapper or core. Fiberglass decking is considered low-maintenance and durable. It may get hot underfoot, depending on the manufacturer. The material costs between $8 and $15 a square foot on average.

How much does it cost to build a platform deck?

Platform decks are a nice alternative to a patio and are ideal for holding hot tubs and entertaining. They can be made of any decking material but are most often built of wood or composites. They cost around $10 to $30 a square foot to build, depending on the material.

What is the best material for a metal deck?

For those who want a metal deck that does not get as hot in the sun as steel, aluminum is a good choice. Aluminum is a lightweight metal that can create a contemporary-looking deck. It is easier to work with and install, but it can be very noisy. It makes echoing and pinging noises when walked on and struck, and it dents easily. But it is flame and insect-resistant and does not rot. Aluminum decks cost around $12 to $13 a square foot for the material.

How much does a deck cost?

The average cost of decking material ranges between $20 and $45 per square foot. There are three common choices of materials: wood, composite, and plastic. Pressure-treated wood costs between $15 and $20 per square foot and $2 to $5 for decking boards. Plastic and composite materials cost between $30 and $40 per square foot and $12 to $22 for decking boards. Trex decking is a popular sustainable composite that does not use wood.

How much does it cost to build a deck?

On average, the cost to build a deck is $7,696, which quickly translates to a boost in property value.

What are the problems with a DIY deck?

Some common problems with DIY decks are exposed nails or screws, uneven boards, a bowed foundation that could collapse, unstable stairs or railings, and more. These safety hazards increase with the complexity of second-story or multilevel decks.

How much does a concrete footer cost?

The average cost of a concrete decking block is $50 to $75, and the average cost of a poured concrete footer is $200 to $400.

Why is it important to build a deck?

Increased Property Value. Building a deck is a much simpler task than building a home, yet it gives homeowners a higher rate of return on their investment —up to 80 percent. For homeowners who plan to sell their house, adding a deck is a great investment to appeal to potential buyers.

What happens if a deck is not properly maintained?

If the deck wasn’t properly maintained, the wood may have rotted, nails may be exposed, and joists may be loose. All of these are safety concerns that can quickly be assessed to determine whether the deck needs to be repaired or if it should be demolished and then replaced.

How much does it cost to install a deck skirting?

Lattice is the least expensive with an average cost of $3 per square foot, vinyl could cost up to $50 per square foot , and stone veneer averages up to $200 per square foot.

When to get contractor pricing?

Try to get prices in late Fall, early winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season.

Do you have to have a copy of the Pine Decking Manufacturer's installation requirements before starting?

Be sure to have a copy of the Pine Decking Manufacturer’s recommended installation requirements before starting, to make sure your project doesn’t end up costing you more money in the long-run.