When should you sharpen hedge trimmer blades?
Well, the ideal time to sharpen the blades of your hedge trimmer is before you start seeing evidence of wear in the blades. Keep in mind that the lifespan of the trimmer is dependent on your regular maintenance, and that also goes for the blades.
What is the abrasion limit when sharpening a hedge trimmer?
You should always be careful not to remove too much material during sharpening: the abrasion limit is 5 mm. If you file off more than this, the material strength may be compromised, rendering your hedge trimmer unusable.
How do you sharpen hedge trimmers with a whetstone?
Turn the hedge trimmer over so that you can work on the back of the blades, and lightly moisten them as you work. Draw the whetstone along each blade, using a careful swiping motion in the direction of the tip and smoothing the roughened surface as you go.
How long does a hedge trimmer last?
Keep in mind that the lifespan of the trimmer is dependent on your regular maintenance, and that also goes for the blades. Experts recommend that the blades of the hedge trimmer be sharpened after every 50 hours of use.
How much does it cost to sharpen a hedge trimmer?
On average, you can expect blade sharpening services to cost between $15 to $30 for the electric and gas hedge trimmers and about $6 to $10 for the smaller manual hedge trimmers.
What is the best way to sharpen hedge trimmers?
0:254:29How to Sharpen Hedgetrimmer Blades - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use a mill file and sharpen them by hand. Or you can use a powered reinder which will makeMoreYou can use a mill file and sharpen them by hand. Or you can use a powered reinder which will make the process a little bit faster.
How do I keep my hedge trimmer blades sharp?
1:034:29A Quick and Simple Tip for Sharpening Your Hedge Trimmer ...YouTubeStart of suggested clipEnd of suggested clipSo what you're going to need is a 5/16 socket battery power or plug in a dremel tool and this one weMoreSo what you're going to need is a 5/16 socket battery power or plug in a dremel tool and this one we got our Arbor for a pretty cheap maybe like 30 bucks. And it comes with a variety of different bits
Do electric hedge trimmers get dull?
You can usually tell that it's time to sharpen your electric hedge trimmer when it stops cutting well. Every cut the blades make also dulls them a little bit, eventually requiring you to sharpen them.
Do electric hedge trimmers need sharpening?
If your petrol or electric hedge trimmer leaves behind an uneven and frayed edge as it cuts, this indicates that you need to sharpen the hedge trimmer blades.
What is the best lubricant for hedge trimmer blades?
Often, the manufacturer will recommend an oil that works well on its product. Tanaka, for instance, recommends WD-40 on its trimmer. In general, though, any type of tool oil can be used to lubricate the blades.
How do you clean and sharpen electric hedge trimmers?
0:583:56How To Sharpen and Clean Hedge Trimmer Blades (The Easy Way)YouTubeStart of suggested clipEnd of suggested clipBut pretty much all you do is take your grinding stone. And go back and forth. Across the hedgeMoreBut pretty much all you do is take your grinding stone. And go back and forth. Across the hedge trimmers like that and you end up with a nice clean. Area on there too.
How do you sharpen hand held hedge trimmers?
Sharpen Hedge Shears With a FileStep 1: Tighten the Pivot Nut. Before sharpening, check the pivot nut. ... Step 2: File the Edge to Expose Clean Metal. Clamp the blade firmly in a vise. ... Step 3: Sand the Back Side of the Blade. ... Step 4: Tip: Use Hedge Clippers.
How do you sharpen trimmer blades?
0:004:10How to Sharpen clipper blades - YouTubeYouTubeStart of suggested clipEnd of suggested clipGotta sharpen your own clip of blades I just took the plates off move all the pieces get yourself ofMoreGotta sharpen your own clip of blades I just took the plates off move all the pieces get yourself of sharpening stone. Don't see the side of it two-sided make it read it says Made in Brazil.
How do you sharpen an electric trimmer?
0:352:06Hair Cutting Tips : How to Sharpen Hair Trimmers - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake your larger clipper blade place it on the stone. And with the light touch. Run it back andMoreTake your larger clipper blade place it on the stone. And with the light touch. Run it back and forth.
Can you replace hedge trimmer blades?
You can easily fix this issue by loosening the bolts on the blade guide and bending the teeth with pliers. If you require blade replacement then remove all the locking nuts securing the blades and remove the blade guard and tip guard with the washers.
How do you service an electric hedge trimmer?
0:000:35How to maintain an electric hedge trimmer - YouTubeYouTubeStart of suggested clipEnd of suggested clipHit the blades with the oil and then run it for a second or two this is going to maintain the bladesMoreHit the blades with the oil and then run it for a second or two this is going to maintain the blades. Keep it from rusting. And allow it to slide much easier.
Why does my hedge trimmer leave a frayed edge?
It happens because the spacers between the blades wear out over time Your dealer can fix this by replacing the spacers for you. If your petrol or electric hedge trimmer leaves behind an uneven and frayed edge as it cuts, this indicates that you need to sharpen the hedge trimmer blades.
Can hedge trimmers be sharpened?
Hedge trimmer blades can be sharpened by hand, and it is recommended that you do so regularly: the job needs a flat file, a whetstone and a little careful attention. Alternatively, your STIHL dealer can sharpen the blades perfectly for you.
When to Sharpen Hedge Trimmer Blades
When it comes to sharpening hedge trimmer blades, it’s best to do it regularly, rather than wait until they become blunt. You should be able to get about fifty hours of use before they need to be sharpened. This will vary a bit though depending on the type of foliage you’re cutting.
Safe Work Environment
With any power tool, safety is your first and main concern. The first step is to cut the tool’s power source.
How to Sharpen a Hedge Trimmer with a Mill File
Use a mill file to sharpen the blade by hand. A mill file is a single-cut file with the teeth pointing in the same direction.
Sharpening Hedge Trimmer Blades with a Grinder
You can also use a grinder to sharpen the blades. The process is the same, but there are other factors to consider.
Professional Blade Sharpening
The third method of getting your blades sharpened is to take your hedge-trimmer to a professional. You may not get the same sense of self-satisfaction, but it’s relatively inexpensive, less hassle, and you’ll know the job’s been done right.
DIY or Professional Service?
It’s relatively easy to learn how to sharpen a hedge trimmer. You’ll get a sense of independence and accomplishment, and the convenience of not being without your tool. But if you don’t have the time, it makes sense to have the blades sharpened professionally.
