| Kitchen Base Cabinet Dimensions | |
|---|---|
| Height, with countertop | 35 to 36 inches |
| Depth (front to wall), without countertop | 24 inches |
| Depth, with countertop | 25 to 26 inches |
| Standard widths | 12, 18, 24, 30, 33, 36, 48 inches |
What height should kitchen cabinets be?
The recognized standard height for upper kitchen cabinets has been 18 inches above the countertop. This continues to be a common height used when installing kitchen cabinets. However, this standard is not used in every case. In some cases, a higher height is used, such as 20 inches, to provide extra room for various reasons.
What is the standard height of a kitchen cabinet?
Height: Typically, standard base cabinets measure 34 1/2" H and 36" H from the floor to the top of the countertop when a countertop is installed. The toe kick portion of the cabinet is 4 1/2" H, the standard door height is 24" H, and the top drawer height is 6" H (equaling 34 1/2" H total).
What are the standard dimensions of kitchen cabinets?
- Standard kitchen upper cabinet heights: 12, 15, 18, 24, 30, 36, and 42 inches
- Standard kitchen upper cabinet depths: 12, 15, 18, and 24 inches
- Standard widths of kitchen upper cabinet width: 9 to 48 inches, in 3-inch increments
How to determine install Heights for kitchen cabinets?
Proper cabinet height depends upon the type of cabinets you are installing.
- Standard Base Cabinets. Most floors are not level but cabinets must be level. ...
- Special Base Cabinet Heights. Depending on the reasoning for special cabinets, the right height will vary. ...
- Upper Cabinets. You will determine the right height by factoring in how much space is needed between the lower and upper cabinets.
:max_bytes(150000):strip_icc()/BrassFixturesAgainstCreamColorCabinets-5a1c73649e9427003729a91e.jpg)
What Height Are Tall Kitchen Cabinets?
Most kitchens have at least one tall kitchen cabinet built into the layout. Typically, these floor-to-ceiling cabinets serve as either pantry or utility storage. Use tall kitchen cabinets to frame a refrigerator or wall oven for a seamless look.
How tall are base cabinets?
Standard height (34.5-inches) and depth (24-inches) make it simple to plan for the installation of countertops and appliances when working with base cabinets. Of course, custom-built base cabinets can alter height as needed to accommodate special needs. Widths vary (12, 18, 24, 30, 33, 36, 48 inches) to incorporate functionality into the design.
What is a Base Cabinet?
Base cabinets are the heavy lifters of kitchen cabinetry because they provide a base for the entire layout. Base cabinets installed on the floor and support countertops and sinks as well as frame (or sometimes encase) ranges, mini-fridges, and dishwashers.
How High Should Cabinets Be for an 8 Foot Ceiling?
Typically, either 30-inch or 36-inch standard wall cabinets are recommended for rooms with 8-foot ceilings. These cabinet heights allow for between 6-inches to 12-inches of ceiling clearance, plenty of space to allow for soffits, crown molding, exposed beams, or any trim.
How Far Should Kitchen Cabinets Be From the Ceiling?
To determine the clearance between kitchen wall cabinets and the ceiling, consider:
Can IKEA Cabinets Go to the Ceiling?
IKEA’s tall cabinets for the SEKTION system are available in either 80-inches or 90-inches. Adding the toe kick, sold separately, increases the total height by 4.5-inches.
How Can I Make My Base Cabinets Taller?
There are several ways that you can raise the height of kitchen base cabinets. Check out these great options:
What is the standard height of a wall cabinet?
Standard heights. 12, 15, 18, 24, 30, 36, 42 inches.
How tall are base cabinets?
Kitchen base cabinets are the most expensive of all kitchen cabinets, and for a good reason: We ask a lot from them. When buying semi-custom or stock preassembled or RTA cabinets, base cabinets are generally available in these dimensions: Height, without countertop. 34 1/2 inches. Height, with countertop. 35 to 36 inches.
How deep are stock cabinets?
The depth measurement is taken from the front outer front edge of the cabinet to the wall. Stock base cabinets are generally 24 inches deep (not counting countertop overhang). Deeper base cabinets make it difficult for you to reach the back of the counter or to plug in appliances. If you have ever had difficulty reaching items in a blind corner (where two sets of cabinets meet at a right angle), you will know how distances beyond 24 inches quickly become difficult.
What is the difference between a 12 inch and 24 inch cabinet?
Tall cabinets are typically available either at 12-inch or 24-inches deep. The 12-inch variety is typically used for pantry cabinets that store canned goods, while 24-inch-deep cabinets make good utility cabinets for brooms, mops, and appliances. Pull-out and slider hardware can give greater functionality to 24-inch-deep cabinets.
What is a tall cabinet called?
These tall cabinets are sometimes known as pantry cabinets or utility cabinets. As befits the name, tall kitchen cabinets can even extend from floor to ceiling. Height.
How high should a countertop be?
It is often said that "countertops should fit the user.". Due to individual needs, countertops sometimes go as low as 32 inches and as high as 38 inches, but these heights require custom fabrication.
How tall should a kitchen countertop be?
After adding a countertop, the eventual height of most base cabinets is between 35 and 36 inches, depending on the material used in the countertop. Height is flexible.