What is the best height for a toilet?
standard height toilet is best for short people who have a height of around five feet or five and a half. Standard height toilets come in 15 to 16 inches seat height. But, if you are craving for a taller model, you can opt for it. How To Raise A Toilet Height?
What is the best tall toilet?
The 6 Best Comfort Height Toilets
- Convenient Height Tall Toilet – Best Overall. The Convenient Height Tall Toilet is our pick for the best overall comfort high toilets. ...
- Kohler Highline Elongated Toilet – Best Value. The Kohler K-3999-0 Highline Elongated Toilet is our pick as the best comfort high toilet for the money.
- Toto UltraMax II Toilet – Premium Choice. ...
- KOHLER Santa Rosa Toilet. ...
How much does an American standard toilet cost?
The typical toilet installation cost will run you between $122 and $228 . Note that these prices do not factor in how much the toilet itself will cost. As a homeowner, you will be in charge of supplying it. The cost of the toilet will vary with each model’s features and the kind of material used to produce it.
What is the average height of a toilet?
The general rule of thumb for standard toilet sizing is between 27 and 30 inches deep, the back height is usually between 21 to 31 inches and the width is about 20 inches. It is also important to note that an ada compliant toilet must be of 17 to 19 inches in seat height.
What is the most common toilet height?
Standard toilet height is around 14 1/2” from the floor to the bowl rim, without a toilet seat. In recent years toilet bowl height has increased to assist people with sitting and standing up, for the benefit of taller people, and those with physical handicaps and/or the elderly.
What is the difference between standard height and comfort height toilets?
It wouldn't seem like a little bit of height could make so much difference, but there is a reason the slightly elevated toilet is referred to as being “comfort height”. The difference between standard height and comfort height toilets is approximately two inches.
What is the average height of a toilet at a house?
Comfort Height toilets are 17 to 19 inches from the floor to the top of the seat. Standard toilets are less than 17 inches high. They are designed to have about the same seated height as a typical chair. Taller people typically prefer a Comfort height toilet.
What height of toilet is best?
Toilet Height Standard-height rims are 14- to 15-inches from the floor and should work well for shorter people. If you're taller, consider chair height toilets that have a toilet seat height of 17-inches or more.
What height toilet is best for seniors?
While a standard toilet typically measures 15 or 16 inches from the floor to the top of the seat, comfort toilet heights are 17 to 19 inches. The Americans with Disabilities Act (ADA) specifies that the height of a disabled toilet must be within this range.
Is it better to have a higher toilet?
The taller seat simply makes it easier to sit down and stand up. The higher seat alleviates discomfort that comes from squatting down and cocking the knees out to the sides. A comfort height toilet is especially beneficial for taller people, seniors and anyone with knee or back pain.
Which is better round or elongated toilet?
Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31" from the wall, while round fixtures max out at 28". Because round bowls are less expensive than elongated bowls, they save a few dollars, too.
How can I make my toilet taller?
5 Ways to Increase Toilet Seat HeightInstall a Tall Toilet Seat. ... Install a Toilet Riser. ... Install an Elevated Toilet Seat. ... Place a Toilet Frame Over the Toilet. ... Use a Mechanical Toilet Seat Lift.
How tall is a tall height toilet?
In compliance with the Americans with Disabilities Act (ADA), a tall toilet or ADA toilet is 17 inches to 19 inches from the floor to the top of the seat compared to a standard height toilet which is 15 inches to 16 inches.
Why would I want an elongated toilet bowl?
Elongated bowls are also considered more 'hygienic' in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
What is better elongated or round toilet?
Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31" from the wall, while round fixtures max out at 28". Because round bowls are less expensive than elongated bowls, they save a few dollars, too.
What are the different toilet heights?
Toilet height is measured from the floor to the top of the seat. Most often, toilets fall somewhere between 15" and 19", with standard toilets coming in under 17". Chair-height toilets measure 17" or more.
How can I make my toilet taller?
5 Ways to Increase Toilet Seat HeightInstall a Tall Toilet Seat. ... Install a Toilet Riser. ... Install an Elevated Toilet Seat. ... Place a Toilet Frame Over the Toilet. ... Use a Mechanical Toilet Seat Lift.
What is the difference between regular and universal height toilets?
While most universal height toilets are between 17″-19″, some companies, like TOTO, use the term to describe any toilet with a seated height of 16.5″ or taller. In comparison, a standard height toilet is between 15 and 17″ tall.
What is the difference between a back to wall toilet and a wall hung toilet?
The main difference between a back-to-wall toilet and a wall-hung toilet is that a wall-hung toilet appears to be suspended above the floor, without touching the floor.
What is the most important thing to look at when buying a toilet?
While extra features and components are fun and important, the most important thing to look at is toilet dimensions . After all, you don’t want to get a toilet with an elongated seat if your bathroom is narrow.
Why are wall hung toilets so attractive?
Wall Hung toilets are attractive as there’s no gunk or build-up that commonly occurs at the base of the toilet because there is no base. Instead, the toilet is hung on the wall and the outgoing sewer pipe cuts through the wall and drains down and out. Where there should be a base, there is empty space, which creates another benefit of making it much easier to clean floors.
How long is a 2 piece toilet?
The toilet seat itself spans 18.5 inches long and is just under 14 inches at its widest. In addition to being long, the Back-to-Wall Elongated 2-Piece Toilet also has some notable height advantages. The seat itself is 16.5 inches above the finished floor.
What is the outgoing hole in a toilet?
This outgoing hole is where you are going to be the central point of your toilet installation process as the holes absolutely must align and everything else can be more readily adjusted, such as adding extra length to your incoming water pipe.
Why do you want a skirted toilet?
For example, if you’re going for a modern bathroom remodel then you may prefer a modern-looking skirted toilet for its aesthetic appeal , rather than a simple wall-mounted toilet that doesn’t look as good.
How many inches is a 2 piece toilet?
From the back of the wall to the forward-most tip of the toilet bowl, the Back-to-Wall Round Front 2-Piece Toilet measures 28.5 inches. This makes it a full two inches shorter than the aforementioned Back-to-Wall Elongated 2-Piece Toilet.
What Do You Know About Toilet Bowl Height?
In recent times, toilet height has become a criterion for many toilet buyers looking for the best throne they can deservedly afford. The trend has all to thank the aggressive marketing campaigns, all competing for an opportunity to change minds about toileting comfort. To an extent, a high bowl is almost synonymous with comfort.
ADA Height Range Sets the Standard
Some may suggest using the ADA stipulated seat height (refer to 604.4 Seats.), which is at least 17-inch, up to a maximum of 19-inch measured from the floor to the seat top. That makes sense since no toilet depth is 19-inch or less. Even the wall-hung models with the hidden tank have a projection of no-less than 20 inches.
Beyond ADA Height Range
Since 2016, a new taller-than-ADA seat height toilet was born. The Convenient Height Toilet is 20-inch tall, or its seat height is 21 inches high.
The Divide is Clear For the Regular Tank and Bowl Toilets
Due to the physical limitation of the floor-mounted, porcelain tank and bowl siphonic toilets, it is impossible to achieve a total length of 20 inches or shorter. Of course, unless it is specifically built for kids or as a decorative item, it doesn't apply to the functional mass-produced toilets that we are all familiar with.
What are the Dimensions of a Standard Toilet?
Standard toilet sizes are usually between 27 to 30 inches deep ; that is 69 to 76 cm, about 20 inche s in width, i.e., 51 cm, between 27 to 32 inches in height (68.5 cm to 81 cm), and features a rough-in of anywhere from 10-12”. You won’t want to have a large toilet in a tiny bathroom, so the dimensions of your toilet are important.
How much space do you need to put in front of a toilet?
Start from the front of the toilet bowl to the end of your tank. It’s recommended that you leave a minimum space of 24 inches in front of the toilet. This guarantees that there will be enough space to walk around in front of your toilet and that your bathroom door wouldn’t keep hitting the toilet, assuming the toilet is situated beside the door.
How far should a toilet seat be from the floor?
To be ADA compliant, the distance from the floor to the peak of the toilet seat should be between 17”-19”. This is about 43.1-48.3 cm. Note that this distance is measured to the top of the toilet seat and not to the rim of the toilet bowl. Until recent times, standard toilets were about 15 inches long, that’s about 38.1 cm. This was a few inches shorter than ADA accessibility requirements.
How big is a toilet rim?
Keep in mind that this toilet would look too big in small bathrooms. The rim of the toilet is 18.5 inches in length and below 14″ in width.
How wide should a toilet be?
Toilet Breadth. Start from the left corner to the right corner of the toilet rim (the widest parts of the rim). Your toilet needs to have a minimum space of 30 inches regardless of its location within your bathhouse.
What are toilets made of?
Toilets are one of the most common fixtures found in every bathroom. Toilet parts are typically made up of a toilet bowl, a tank, a seat, and a seat cover. Over the years, the world has seen many toilet brands and several types of toilets, starting from pit latrines, chemical toilets to today’s more sophisticated water cisterns and smart toilets.
What is the first step in getting a toilet?
Choosing the toilet dimensions you prefer is just the first step in getting a toilet. The next thing is finding out how to install the toilet.
What is the difference between Kohler and TOTO?
For marketing purposes, different companies identify chair heights with different names, as mentioned earlier, for instance, Kohler refers to it as comfort height. TOTO on the other hand calls it the universal height. Other brands may use Right-height or ADA height. They all mean the same thing.
What is the difference between comfort height and chair height?
Chair height is the common term for all toilets with a height that is at least 17 inches while comfort height is a brand-specific term, for chair heights . It is used by Kohler CO, ...
How much does a comfort height toilet cost?
Comfort height toilets cost between $100 to $300 depending on your preference and brands such as TOTO, Kohler, and American Standard. As for the standard toilets, they can cost you between $200 to over $400. The best brands for these kinds of wash sets include Drake, TOTO, and American Standard.
Why are comfort height toilets more prevalent than standard toilets?
Usage. As mentioned earlier, comfort height toilets are more prevalent than the standard toilets, probably because they serve a greater population than the other. Either way, they allow for easier sitting and standing, regardless if you’re not physically challenged, aged, or tall.
Why do toilets help with constipation?
Standard toilets are thought to enhance bowel movements hence preventing constipation and hemorrhoids. This is because the hips will be well-positioned below the knees.
How tall is a Kohler toilet?
Kohler’s comfort height toilet, commonly known as chair height, typically measures above 17 inches. This height is best for taller individuals and people with mobility issues. On the other hand, standard height toilets measure below 17 inches. This height is ideal for individuals of average or smaller size like children.
How tall is a chair?
From the floor to the top of the seat, chair heights measure approximately 17 to 19 inches tall; as mandated by the ADA (Americans with Disability Act) compliance standard. You can also measure this height by adding the bowl height and the toilet seat height. The design, style, and features may be different but the height measurements for chair ...
How much does a toilet cost?
Toilets range between $150 and $300 for comfort height models and $220 and $370 for standard versions.
Which is better, a comfort height toilet or a standard toilet?
Also, rest both feet on the floor. For this reason, a comfort height toilet will probably be the better choice for anyone who has difficulty standing from a low position, such as the elderly or disabled. A standard toilet will be the better option for a child or someone small in stature.
How high is a standard toilet?
This is like the height of a chair. The height of a standard toilet is about 15 inches from floor to seat . The one that is right for your home depends on the height of the family members, whether anyone has physical needs, and the way that family members transfer to and from the toilet.
What is the best color for a toilet?
Both comfort height and standard toilets come in a variety of styles and colors. The most popular color is white or beige since these are better for the resale value of the home. Choices include a one- or two-piece design. The two-piece is the less expensive and more traditional. The one-piece is easy to clean with a more sleek look.
Why do people sit in a standard seat?
This is because bowel movements are facilitated when the hips are slightly below the height of the knees in a squat position .
What is the difference between a two piece and a one piece toilet?
The two-piece is the less expensive and more traditional. The one-piece is easy to clean with a more sleek look. The inner mechanisms can also vary in either height. They can be traditional gravity flush or have pressure-assisted flushing mechanisms. You can even have bidet functionality with either toilet.
Is comfort height toilet popular?
However, in recent years, the comfort height toilet is becoming more popular. Whether to choose this height or the more standard one is a matter of personal taste.
