What is the average size of a cabinet door?
What is the standard size of kitchen cabinet doors? Kitchen cabinet door heights are typically between 24 and 30 inches. If the cabinet is a full height base cabinet (one that only includes a door), the door is typically 30 inches tall. Click to see full answer.
How do you measure cabinet doors?
How do you measure for cabinet doors? Add 1 inch to both the width and the height of each opening size measurement. For example, a 14″ x 30″ cabinet opening should now read 15″ x 31″. This technique allows for a 1/2″ overlay of cabinet door openings. If you order by cabinet order size alone, your doors will be too small.
What is the standard height of an interior door?
While you are measuring existing frames or creating space for a rough opening, remember these important highlights: The standard height for interior doors is 80”. Standard widths can range anywhere from 1 ⅝” to 1 ¾”. Add an extra 2” for width and 2 ½” for height when planning out a rough opening.
How many hinges should a cabinet door have?
No matter what type of cabinet door you are looking to hang onto your cabinets, you will always need two cabinet door hinges. Unless the door is very heavy where you may need a third, two hinges are typically required. Cabinet door hinges are placed on the top and bottom of the side of the door. 2. Opposite Cabinet Door Pull
How tall is too tall for a cabinet door?
Can you get a door bigger than 42"?
About this website
What is the maximum height of kitchen cabinets?
Kitchen Tall Cabinet Height, Depth, and WidthKitchen Tall Cabinet DimensionsHeight84 or 96 inchesDepth12 or 24 inchesWidth12, 24, or 36 inchesJun 14, 2022
How long can a cabinet door be?
These limits have evolved over time to insure that the cabinets and the doors will be reliable and trouble-free. The rule-of-thumb is that door heights of up-to 60 inches are seldom a reliability problem. Door widths, however should be kept to under 24-inches.
Can kitchen cabinets be too tall?
For those with extra high ceilings in the kitchen, those ceilings higher than 10 feet, the general rule of thumb is not to take the cabinetry to the ceiling. Functionally, cabinets higher than 10 feet would be extremely difficult to get to, and aesthetically, cabinets that are too tall can overwhelm the space.
How do you keep tall cabinet doors from warping?
1:542:56How to prevent warping in unfinished cabinet doors - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe warp can sometimes be removed by wiping the concave side of the door with a slightly damp spongeMoreThe warp can sometimes be removed by wiping the concave side of the door with a slightly damp sponge. This will reintroduce moisture.
Can a cabinet door be wider than it is tall?
For instance, few cabinet doors are wider than they are tall. If one of the dimensions you have worked out suggests otherwise, it's worth it to recheck your math. Make a Diagram – The concept of overlays can get complicated.
What are standard cabinet door sizes?
Kitchen Cabinet Dimensions: 101Height- 12, 15, 18, 24, 30, 36, and 42 inches. Wall cabinet heights are typically limited as they must fit between kitchen countertops and ceilings. ... 12-inch cabinets are those you place above a fridge.Width- 12-36 inches. ... Depth- 12-24 inches.
Why do kitchen cabinets not go to the ceiling?
The majority of kitchens don't have ceiling-height cabinets because they can be too high to access for some people. They're also more difficult to maintain and the cost of installing taller cabinets can be expensive. Additionally, not all kitchen sizes and ceiling heights can accommodate full-rise cabinets.
How can I raise the height of my kitchen cabinets?
1:513:16How to Raise Upper Kitchen Cabinets to the Ceiling - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing your extra set of hands to help raise the cabinet back up resting the Box on the ledger board.MoreUsing your extra set of hands to help raise the cabinet back up resting the Box on the ledger board. While your helper secures the cabinet box in place drill. The screws back.
How can I make my kitchen cabinets look taller?
1:149:54How to Add Height to Builder Grade Cabinets - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're going to add heights to the cabinet by putting open shelving up there and that way it addsMoreWe're going to add heights to the cabinet by putting open shelving up there and that way it adds height it's gonna give her a little bit of extra storage.
Can plywood be used for cabinet doors?
Steel and plywood are available materials for cabinet doors and cabinet boxes. Solid wood is costly and does not have an attractive smooth texture. It requires extensive care. Plywood is a higher construction material since its nominal thickness doesn't crack.
What is the best wood to use for cabinet doors?
The Best Wood to Build Cabinet DoorsBirch Solid Wood. Birch is a fairly cheap, yet durable wood. ... Hickory Solid Wood. This is a beautiful, pale yellow wood that lends itself well to natural finishes. ... Maple Solid Wood. ... Quartersawn White Oak. ... Red Oak Solid Wood. ... Walnut Solid Wood.
Will plywood cabinet doors warp?
Plywood doors are an affordable alternative to wood and fiberglass doors. With their considerable stability and impact resistance, they are your best choice for an internal or garage door. But most plywood doors tend to warp when exposed to moisture.
How much gap do you leave around cabinet doors?
Doors have a recommended gap of 2 mm on each side and 2.5mm on the top and the bottom. The gap between two panels (door and drawer or two drawers) is usually 5mm.
How much do cabinet doors reveal?
Make sure you have at least 1/4" reveal (gap between doors). If you go less than 1/4", then you may run into problems with the operation of the doors. Some cabinets may have stile and rail widths that vary from one part of the cabinet to another.
How much clearance does a cabinet door need to open?
Tim Inman: One-quarter inch OVERALL would leave you with a one-eighth inch gap all around. That's about right. If you make the gap much bigger, it looks like sloppy work. If you make it any smaller, you'll end up with binding doors.
How much gap do you need for full overlay cabinet doors?
1/4”A good rule of thumb is to select the hinge overlay that is a minimum of 1/8” less than your frame width. For example, if your frame width is 1 1/8” your ideal overlay hinge would be 1”. This allows for a 1/4” gap between doors which gives enough clearance for the doors to open without touching.
How far should the cabinets be from the ceiling?
An 8-foot ceiling with a 12 inch soffit will need 30 inch cabinets. An 8-foot ceiling with a crown molding finish will typically use 36 inch cabine...
What is the standard size of kitchen cabinet doors?
Kitchen cabinet door heights are typically between 24 and 30 inches. If the base cabinet features a drawer, the door height below it the drawer is...
What size cabinet goes over a stove?
Take note of any crown molding above your kitchen cabinets, as well as the height of the other wall cabinets. See the table in our ‘Wall Kitchen Ca...
How do I measure kitchen cabinets?
Taking accurate measurements are an important step to functional kitchen design. Learn how to measure your kitchen with our step-by-step guide.
What are standard kitchen cabinet depths?
The standard depth for full height base cabinets is 24 inches deep. For islands and applications where wall obstacles prevent full cabinet depth op...
How deep should upper cabinets be?
Standard wall cabinet depth is 12 inches, and 24 inches deep over the refrigerator to allow easier access. When designing a kitchen with a staggere...
What Materials Do You Need To Measure Cabinet Door Openings?
You don’t need any special tools or materials to measure cabinet doors. All it takes to get an accurate measurement is a standard tape measure. Mak...
Do You Need to Remove Cabinet Doors to Measure for Openings?
We recommend you do. It’s generally easier to get accurate measurements when you don’t have to work around the existing doors. Removing doors is ty...
What is a Cabinet Overlay?
Most cabinet doors are not the same size as the cabinet opening they cover. They are actually a little bit bigger. They “lay over” the edge of the...
Can You Change a Cabinet Overlay?
It depends on the cabinets. If the edges of the existing doors don’t touch, you can increase the size of the overlay.
How Do You Measure a Cabinet Door Overlay?
Close the cabinet door you want to measure. Make a pencil mark along the outside edge of the door on the hinge side. Remove the cabinet door. Measu...
How Do You Measure for Single Cabinet Doors?
Remove the door you want to measure. Measure the opening from top to bottom, and then left to right, then write down the exact width and the exact...
How Do You Measure for Double Cabinet Doors?
To calculate the width of each door, begin by adding your overlay to the width of the opening. Next, subtract 1/8th of an inch from the width, then...
How Do You Order Custom Cabinet Doors?
Use a drop-down menu to pick the wood species. Then select whether you want us to drill hinge holes and whether you want to order hinges. Finally,...
How tall are kitchen cabinets?
Tall cabinets are typically 84" H, 90" H, and 96" H. The height of these cabinets will vary depending on your ceiling height and your preference to have space between the cabinet and ceiling or not.
How wide is a standard wall cabinet?
A standard wall cabinet will vary in multiples of threes between 12 inches and 36 inches. Our assembled cabinets and ready to assemble cabinets also include widths of 5 inches and 9 inches in some styles. The width of a wall cabinet can vary to allow for single or double doors.
How wide is a pantry?
When working with stock cabinet lines, pantry widths are typically limited to 18" wide or 24" wide. However, when working with semi-custom cabinet manufacturers, pantry cabinets range from 9" W in 3" W intervals up to 36" wide. Tall oven cabinets are typically 30" W to 36" W to fit most standard size single oven widths on the market.
What is a base cabinet?
Base cabinets serve as the base or foundation for countertops and other surfaces. They rest on the floor and typically come with one drawer and a set of shelves or a few drawers stacked on top of one another, depending on your needs and preferences.
How deep should a base cabinet be without a countertop?
Depth: The depth of base cabinets without a countertop is 24 inches. Base cabinets have a standard depth for easy access. When adding a countertop, there is often an overhang that can add another inch or two.
What to consider when designing kitchen cabinets?
There are a few factors to consider when designing the perfect kitchen cabinets including the use, price, and style —but none as important as the size of your cabinets. If you're a builder, contractor, or industry professional, take advantage of our discount for kitchen contractors.
How deep should a wall cabinet be?
Standard wall cabinet depth is 12 inches, and 24 inches deep over the refrigerator to allow easier access. When designing a kitchen with a staggered height cabinet look, it is important that you make taller cabinets 3 to 15 inches deeper.
How wide is a cabinet door?
The industry standard is 24 inches, but cabinetmakers have reason to prefer even narrower doors. February 9, 2006
What is the width of center panel?
Center panels over 17" width can expand over 1/4" which will be greater than the spacing for space balls. This can cause the side rails to start to separate from the cross rails. Also the wider panels are much more likely to warp or split.
How Do You Measure for Single Cabinet Doors?
Follow these steps to get the initial measurements for each individual door and drawer front.
How Do You Order Custom Cabinet Doors?
Our order process is as simple and seamless as possible. Use a drop-down menu to pick the wood species. Then select whether you want us to drill hinge holes and whether you want to order hinges. Finally, enter the dimensions of each door as either a fraction or decimal point. At this point, you’re ready to submit your order. Note that many of our doors are available with finish options. If you want your doors to arrive with select paint colors already applied, that is possible as well.
What Happens When the Doors Arrive?
Once your doors arrive, all you need is a power drill and a Phillip’s head screwdriver to complete your DIY upgrade. Please note that it helps to have an assistant during this process. The final step is to adjust the doors so that they fit your existing cabinets perfectly. We have created a helpful video tutorial to walk you through this entire process. You can also leave this up to a professional contractor.
How big is a hinge overlay?
Here’s an example: we offer Blum hinges that all have a ½-inch overlay. So if you use these hinges, your overlay will be ½-inch. A ½-inch is considered the industry-standard for an overlay, but larger and smaller sizes are also available with different hinge types. All you need to do is find out how large the overlay is for those hinges and factor that figure into the formulas we lay out below.
What is the advantage of ordering custom doors?
The advantage of ordering custom-cut doors is that you know they will fit perfectly. Instead of trying to make do with what you can find at a big-box store, you get exactly what you need to upgrade your kitchen, bathroom, office or other cabinetry.
How to measure the opening of a door?
Measure the opening from top to bottom, and then left to right, then write down the exact width and the exact height of the opening.
Can you measure for replacement cabinet doors?
Measuring for Replacement cabinet doors can make a lot of people uneasy. They worry about getting the dimensions wrong, ordering custom-cut doors, then ending up with something that does not fit. Take it from the experts – measuring your cabinet doors is a lot easier than you would expect.
How big is a cabinet door?
For instance, if the cabinet opening size is 12-inches wide and 24-inches high, the door size will be 13 x 25.
How to measure for a cabinet with two doors?
On wider cabinets with two doors (butting in the center), measure the width of the opening, add 1-inch, then divide by 2. Height is figured the same as for single doors. Just add 1-inch to the height opening. For instance, if the opening is 28 inches wide and 30 inches high, each doors width would be 28 + 1 = 29 divided by 2 = 14 1/2-inches wide. The door height would be the 30-inch opening height plus 1-inch, for a door height of 31 inches.
How many styles of doors are there?
There are hundreds of door styles to choose from. The major categories are divided by assembly method; Cope and Stick or Mitered.
Do you need to measure cabinet doors for replacement?
In this case simply measure the doors you are replacing and order new doors of the same sizes. You don’t need to follow any kind of kitchen cabinet door size chart because the replacement doors will have the exact same size and footprint as the doors there before (but now with the option to have a new style or finish).
How high should a cabinet be?
The ideal upper cabinet height is 54 inches above the floor. That is, the bottom edge of the upper cabinets should sit 54 inches off the ground. This magic number combines the 34-½-inch height of a standard base cabinet (those that sit on the ground), a standard countertop above it with a thickness of 1-½ inches, ...
How tall are kitchen cabinets?
Cabinets are sold in standard heights of 30, 36, or 42 inches . With an upper cabinet mounting height of 54 inches, the top of the upper cabinets would sit at 84 or 90 inches off the ground for the shortest of standard cabinets. A 42-inch cabinet would touch the top of an 8-foot (96-inch) ceiling or might not fit at all if you have soffits, crown molding, or other ceiling trim installed. To avoid having to recalculate the upper cabinet height and cramping your countertop workspace unnecessarily, consider adjusting the size of cabinets going in.
How high should cabinets be above a range?
Increase the height to 66 or 72 inches from the ground for cabinets above a range. Since many cabinets are combustible, there should be sufficient clearance between the bottom of the cabinets and the range to reduce the risk of fire. That exact distance depends on the type of kitchen appliance: 30 inches between an electric range and the bottom ...
How high should a backsplash be?
The height between the top of the countertop and the bottom of the upper cabinet should be 18 inches, the height of a standard backsplash.
Maximum Height of Single Upper Cabinet?
We have 9' ceilings. I want to take the cabinets to the ceiling but I want a single shaker door. How high is too high without additional support?
Comments (4)
You need to be a little more specific. Are you looking to go from floor to ceiling with a cabinet with just one door?
How tall is too tall for a cabinet door?
We have 9' ceilings in the kitchen and I want the wall cabinets to run to the top (with a 4" crown), like mrslimestone's. This will make the them 48" tall. I was going to either stack the cabinets (36" with 12" above), or have two doors, one above the other, in each cabinet but I spoke to a KD today who suggested tall doors, each with a 34" panel with a 12" glass panel above it. Now, I know this would save me money, but I'm worried that's one TALL door to open everytime I go into the cabinet.
Can you get a door bigger than 42"?
Just be aware that when you get larger than 42" you increase the chances of warping over time because the stiles are a single piece of wood. Many custom cabinet manufacturers have a waiver that must be signed if the customer wants a door larger than 42". Structurally, it's better to break up the space into two doors rather than a large single one.