What is the standard size of a refrigerator?
The standard size of a professional-grade refrigerator is between the ranges of 30 to 36 inches in width, 67 to 70 inches in height, and 29 to 35 inches in depth. For the interior, the refrigerator should have about 14 to 20 cubic feet of space. In total, however, you should be able to get between 22 and 31 cubic feet.
How to measure a refrigerator in cubic feet?
To get either the inner or outer dimension of your refrigerator in cubic feet, multiply the respective height, width, and depth that you measured earlier first. Then, divide the value by 1,728.
How many cubic feet is an 18 cubic foot fridge?
For example, an 18-cubic-foot model may devote 5 cubic feet to the freezer, and its 12 cubic feet of fridge space may be chopped up by bins and shelves. Consumer Reports' engineers, for example, subtract volume for such things as obstructions on top shelves and hardware.
How much clearance do you need under a refrigerator?
Step 2: Measure the height of your refrigerator space from the floor to the lowest point under the upper cabinets. Generally, a fridge needs at least one inch of overhead space for ventilation, so be sure to account for this minimum clearance by subtracting one inch from your recorded measurement.
How tall is the average fridge in height?
62 to 72 inchesStandard refrigerator sizes range from around 24 to 40 inches in width, 62 to 72 inches in height and 29 to 36 inches in depth. Generally speaking, french door and side-by-side refrigerators will be larger in width and height, though counter-depth models are frequently available in these two configurations.
How many feet tall is the average refrigerator?
How tall are refrigerators? Standard refrigerator height ranges from 66 to 70 inches tall, with French Door and side-by-side models measuring on the taller ends.
Does refrigerator height include feet?
0:253:28How to Measure a Fridge for your Kitchen - YouTubeYouTubeStart of suggested clipEnd of suggested clipGo from the floor to the lowest point on the upper cabinets. Finally you'll measure the depth of theMoreGo from the floor to the lowest point on the upper cabinets. Finally you'll measure the depth of the space. Go from the back wall to the front edge of your counters or adjacent wall.
What is a standard size fridge in cubic feet?
When it comes to the interior, the refrigerator itself should provide you with 14 to 20 cubic feet of space. Totally, however, you are looking at an average between 22 and 31 cubic feet. Of course, some smaller kitchens may consider a smaller size refrigerator to be more standard.
Are fridges all the same height?
Whether you are envisioning a bottom-freezer, top-freezer, side-by-side or French door model fridge, you can expect a standard fridge to have exterior measurements that range from 28 3/4-inches to 39 3/4-inches in width, 61 3/4-inches to 71 1/4-inches in height and 28 3/4-inches to 34 5/8-inches in depth.
How do I figure out the size of my refrigerator?
Grab a tape measure and measure the width, depth and height of the inside of your refrigerator. Multiply the numbers together (W x D x H) and divide the total by 1728 to get the cubic feet. For example, if you have a refrigerator that measures 30" wide by 30" deep by 48" high, you multiply 30 X 30 X 48.
How far should refrigerator stick out?
Do Fridges Need Space Around Them? In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you'll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
How much space should you leave around a fridge?
The following are the recommended allowances around the fridge: There should be a minimum of 1 to 1 ½ inches on top of your fridge. Ensure there is 1 to 2 inches of space at the back of your fridge to allow proper airflow. There should be a space between ½ to 1 inch on both sides of your unit.
Will a 36 inch refrigerator fit in a 36 inch opening?
Yes, it should. Mine measures 35.75" wide.
What is a good size refrigerator for a family of 4?
19 to 22 cubic feetAs for capacity, most manufacturers recommend 19 to 22 cubic feet for a family of four. But if you do a big weekly shopping trip or buy in bulk, you may need more—up to 30 to 33 cubic feet. Note: Our tests have found that the amount of usable storage is often less than the amount claimed by manufacturers.
How many cubic feet is a standard top freezer refrigerator?
Top-freezer refrigerator models typically provide between four cubic-feet and five cubic-feet of freezer capacity. These models tend to fall on the smaller end of standard refrigerator dimensions, ranging between 28 and 32 inches wide, 61 and 66 inches tall, and 28 and 34 inches deep.
What is the difference in cubic feet in a refrigerator?
0:003:25Different Sizes and Capacities of Refrigerators - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey're going to get a little bit more space on a refrigerator like this but it's not going to be toMoreThey're going to get a little bit more space on a refrigerator like this but it's not going to be to the capacity that it appears. Based on the outside appearance.
How tall is a Frigidaire fridge?
The Frigidaire Side-by-Side Refrigerator (25.5 Cu Ft) has an overall height of 69.625” (176.8 cm), width of 35.625” (90.5 cm), and depth of 34.5” (87.6 cm). When open, the depth of the Frigidaire Side-by-Side Refrigerator (25.5 Cu Ft) is 51.625” (131.1 cm).
Will a 35.75 refrigerator fit in 36 space?
Yes, it should. Mine measures 35.75" wide.
How tall is 18 cubic feet refrigerator?
66.125 inDimensionsDepth (Excluding Handles)30.125 in32.25 inDepth (Less Door)26.62558.5Height to Top of Door Hinge (in.)66.125 in65.375 inProduct Depth (in.)32.625 in65.875 inProduct Width (in.)30 in30 in
What is the tallest fridge you can buy?
At over 2.1m high, the Samsung G-Series RL60GZEIH is one of the tallest fridge freezers we've tested. That height, combined with a standard 60cm-wide chassis, means exceptional cooling capacity, which is split 70/30 in favour of the massive refrigerator compartment with its 288 litres of space.
How to measure the inside of a fridge?
When you measure the inside of the fridge, take the measurements in metres before you multiply them together. That will give you the cubic metres (m³), and you can multiply that number by 1000 to convert it into litres.
How do you calculate the volume of a refrigerator in litres?
If you want to find out how many litres your fridge can hold (or liters, if you're that way inclined), then there's good news: there is a somewhat easier way than lying it flat on its back and seeing how many bottles of Pepsi you can empty inside the cavity.
What to do if fridge is full?
If the fridge is very full, you'll need to temporarily remove enough food to give yourself some measuring space.
What does cubic feet mean in a refrigerator?
The number that identifies as the cubic feet of a refrigerator represents the capacity of a refrigerator. It is a crucial factor that you will need to consider before purchasing a refrigerator.
How to tell cubic feet of the refrigerator by model number?
Here’s what you will have to do. Multiply the width, depth, and height of the refrigerator to find the cubic feet. It will clearly indicate the volume of the refrigerator, offering you a clear insight into its capacity.
Where to find refrigerator model number?
You will find the serial number of a refrigerator in the following parts of a refrigerator:
Does refrigerator capacity include the freezer?
Yes, the total capacity of a refrigerator will include both the freezer and the fridge. So you can tell the cubic feet of a freezer as well from the model number of a refrigerator.
How wide is a 24 cubic foot refrigerator?
There are a few select models in the 24 cubic foot range that will fill a full 33" width opening. They tend to have the smallest footprints on average out of all other fridge styles so they're a great choice for narrow openings.
How many cubic feet of refrigerator do I need?
A household of 3-4 people will likely need at least 20 cubic feet. Refrigera tors around 10 cubic feet are generally used in small apartments - usually anything below 10 cubic feet is considered a mini fridge.
How deep should a refrigerator be?
If your refrigerator is located next to a wall, leave about 2.5 inches between the refrigerator door hinge and the wall so the door has room to open fully. Refrigerator Depth: Standard-depth refrigerators are about 34" including the handles, and will extend past your typical 24" deep cabinets by around 6-9".
How much space does a refrigerator have?
For example, a 22 cubic foot side by side refrigerator might have 14.5 cubic feet of space in the fresh food section and 7.5 cubic feet of space in the freezer section.
What is the cheapest refrigerator?
The top freezer style is usually the cheapest refrigerator option and a great choice for households on a budget. Models in the 18 cubic foot range are often less than 30" wide and under 67" tall. There are a few select models in the 24 cubic foot range that will fill a full 33" width opening.
What is a French door refrigerator?
French door refrigerators put the freezer on the bottom and split the fresh food compartment in half with two French doors. These models can have HUGE capacities!
What is the difference between a bottom freezer and a French door refrigerator?
Bottom freezer refrigerators flip the top freezer look upside down. They are less popular than French door refrigerators and there are fewer model options, but they tend to be cheaper.
How many pounds of food can you store in a 1 cft freezer?
But, this is too difficult to measure for a specific food. After an estimated calculation, I found that in 1 Cft freezer space, you can store 35-40 pounds or 16-20 kg frozen foods.
How many liters is 1 cu ft?
First, I said that 1 Cu Ft = 28.3 Liters.
What does cubic feet mean in a refrigerator?
Your refrigerator's cubic feet represents how much it can hold. If you plan to purchase a new refrigerator, you likely want to know how large the models you're considering are. Depending on the size of your family and how much food you like to buy on each shopping trip, you may require a very large or a much smaller refrigerator.
How to calculate cubic feet of a refrigerator?
To calculate the cubic feet, you would multiply 6 x 3 x 2. In this example, your refrigerator would be 36 cubic feet. Of course, the issue with a refrigerator is that the inside is not completely empty — there are many shelves, drawers and compartments that change the available cubic feet for storage space. Some refrigerators will not account ...
What Is a Cubic Foot?
A cubic foot is defined as the height times the width times the depth of an item. In the case of a cube, these three numbers would all be the same, since a cube has equal sides. Most refrigerators, however, are rectangular in shape. This means you would likely have three different numbers in your calculation.
Is a refrigerator adjustable or removable?
However, refrigerators and freezers have become more and more versatile, and many compartments, drawers and shelves are adjustable or even removable.
Do refrigerators have drawers?
However, refrigerators and freezers have become more and more versatile, and many compartments, drawers and shelves are adjustable or even removable. In this way, you can minimize wasted space and make storage solutions truly work for you.
How much space does a refrigerator need?
For reference, each adult needs approximately 4 to 6 cubic feet of refrigerator space. That said, industry experts assess that a typical family of four needs at least 20 cubic feet of capacity to house a healthy amount of groceries. These factors and more are what you need to consider before choosing your refrigerator size.
What Refrigerator Size Do You Need?
To determine the ideal storage capacity for your new refrigerator, evaluating the size of your family is a great start, but since a refrigerator’s lifespan is around 13 years, it’s also important to look ahead to the future. Mainly, will your family be growing soon? In addition, are you one to host dinner parties often? The answers to these questions may lead you toward a refrigerator with extra storage space.
Which refrigerator has the most storage?
As we mentioned in “ Our Favorite Large-Capacity Fridges for Big Families ” blog, French-door refrigerators and side-by-side refrigerators offer the most storage capacity of all freestanding refrigerator types. Side-by-side refrigerators, specifically, are a great option for families who purchase groceries in bulk. With a freezer that takes up roughly half of the appliance, you can expect side-by-side fridges to hold more of your frozen-food favorites, including meats, ready-to-cook meals, ice cream, and dinosaur-shaped chicken nuggets.
How many people can fit in a refrigerator?
Top-freezer, bottom-freezer, French-door, and side-by-side refrigerators are all viable options for households consisting of 3 or 4 people; however, if you have a family of four, we recommend exploring French-door refrigerators and side-by-side refrigerators, as these models start at around a mid-sized capacity.
When should you consider counter depth refrigerator hinge height?
If you’re considering a counter-depth refrigerator, the hinge height should be considered when measuring your space and narrowing your selection.
Is it important to account for refrigerator dimensions?
Along with accounting for refrigerator capacity, it is important to account for refrigerator dimensions as they pertain to your kitchen space.
How many cubic feet does an 18 cubic foot refrigerator have?
For instance, an 18-cubic foot refrigerator can have 5 cubic feet going to the freezer and 12 cubic feet for the fridge.
How much space does a refrigerator need?
For the interior, the refrigerator should have about 14 to 20 cubic feet of space. In total, however, you should be able to get between 22 and 31 cubic feet. No doubt, smaller kitchens might consider a smaller refrigerator size. But these smaller sizes are not the standard size of a refrigerator.
How to measure refrigerator size?
To avoid all these, you can measure the refrigerator bearing these in mind: 1 Plan for between one-half inches to one-inch of clearance on both sides of the unit. 2 Leave between one to two inches of space at the rear of the refrigerator to allow proper airflow. 3 Make sure there is a minimum of one-half inch to one-inch of clearance on top of the unit.
How many different styles of refrigerators are there?
Modern manufacturers manufacture refrigerators in three basic styles based on the refrigerator configuration and freezer compartments. Each of these designs comes with its advantages and disadvantages. Therefore, most people shop for refrigerators based on their preferences to find the best unit.
How to find the inner and outer dimensions of a refrigerator?
To get either the inner or outer dimension of your refrigerator in cubic feet, multiply the respective height, width, and depth that you measured earlier first . Then, divide the value by 1,728.
Why do you measure cubic feet of a refrigerator?
Most people measure the cubic feet of a refrigerator because they plan to get a new one. Although, there are other reasons. So, whatever reason you have for measuring the cubic feet of a refrigerator, just know that you should measure the internal and external dimensions as written in this article.
What does knowing the dimensions of a refrigerator do?
Knowing the external measurements of a refrigerator will help you plan where to install it and how much space you need there. This is especially necessary for built-n models.
How to measure the Cubic Feet of Refrigerator?
Find the info about the refigerator model. Once you know that , you can consult the manufacturer’s website to discover your fridge capacity.
What does a smaller cubic foot mean?
cubic foot measurements allow buyers to compare the sizes between different models: a smaller cubic foot measurement means that there is less space for storage, while larger numbers indicate more room in the freezer or freshness compartment
What is a Cubic Foot?
A cubic foot is the standard unit of measure for objects with cubic dimensions. A cubic foot is the total volume of a cube when all six sides of a cube are one foot in length. To determine how many cubic feet are in a refrigerator, you must multiply length x width x height.
Why do we measure cubic footage?
measuring cubic footage helps people determine beforehand whether or not they have enough space to accommodate such an appliance at home (especially if you live with roommates),
How many feet is 1 inch?
5) You could also face the problem converting inchs into feet. Just remember, that 1 inch is equal to 1/12 feet:
