What is the average height of a night stand?
There is no standard height when it comes to buying a nightstand. However, the average height of nightstands that you can find on the market is anywhere between 24 and 28 inches. This height falls in line with the most common bed height, which is 25 inches between the floor and mattress.
What height should drop handlebars be?
Set bars height so that top of the bars is about one or two cm below saddle height. As a starting position, bars drop should be a few cm at most, or even level with the saddle height.
What height should beadboard be?
While the height of beadboard may vary from room to room, 30 to 54 inches is the general height range for most uses. When used in a kitchen or dining area, beadboard protects the walls from chair backs banging against it, serving in much the same manner as a chair rail.
What height should my bedside table be?
The rule of thumb is to consider the height of your bed (that is, the mattress) when choosing a bedside table. Ideally, it should be at the same level or about 2 inches taller. Generally speaking, the average height of beds is 25 inches from the ground, which is why the nightstands’ height is usually around 24 inches.
How tall should a nightstand be compared to the bed?
The average height of nightstands on the market today is between 24 and 30 inches. Beds average approximately 25 inches from the floor to top of the mattress. A nightstand should not be more than 5″ higher or lower than the top of the mattress. However, there are incredible variables in mattresses and frames today.
Can your nightstand be shorter than the bed?
They absolutely can be different heights! Nightstand sellers need to be able to accommodate a variety of bed heights. The average height of a nightstand is 24”-28” inches, but they can be over 30”.
What is the average size of a nightstand?
Standard: Standard nightstands measure between 23" and 28" tall. Since most beds are 24" at the top of the mattress, these nightstands are a great fit for standard bed frames. Tall: Tall nightstands are taller than 30" and work best with beds that have box springs or thick mattress toppers.
What is the standard size of a bedside table?
Nightstand Width Nightstand sizes depend on the space of a bedroom and the size of the bed frame. Standard nightstands are typically 21" – 29" wide and pair well with queen- or full-sized beds. Twin-sized beds look best with a narrower silhouette.
Do bedside tables have to be the same height?
Upon determining the proper size of bed to purchase, you'll then want to look into nightstand measurements. “The advice I give is that the height of the average bedside table should be between 24 and 28 inches in height, giving you 25 inches from the floor to the mattress,” Lau shared.
How do you raise a short nightstand?
6 Practical Ways to Make Your Nightstand TallerPut It on Top of Other Furniture.Add a Wooden Base to the Bottom.Place Something on Top of Your Nightstand.Use a Furniture Riser on the Bottom. Casters. Bun Feet. ... Pay a Carpenter to Fix Your Nightstand.Lower Your Bed Stand. Shorten the Bed Stand Legs. ... To Sum Up.
Should my nightstand match my bed?
Nightstands are smaller in proportion to the bed, or a wardrobe. As long as the bed is central and of a different style and finish it will break the pair up. Saying that, you do not have to match your nightstands. Even if you're creating a symmetrical and balanced bedroom the nightstands can be of a similar style.
Are end tables and nightstands the same height?
Nightstands and end tables typically have comparable dimensions. The standard height for both is about 25 inches. Each is available in differing widths, however chairside tables (the end table's close cousin) tend to have more narrow proportions allowing them to squeeze into tight spaces.
How tall is a nightstand?
Generally, nightstands come in two sizes these days, 24"-26" tall and 28-30" tall. The smaller size works well with our thinner mattresses from yesteryear, or maybe a mattress-only situation for a bed with some kind of platform base or slats for support underneath.
How high should a desk be for a bedside perch?
Desks and tables are typically 29" - 30" high, and therefore can lend themselves to the perfect height for a bedside perch. Consoles and chests can also work nicely. The "bachelor chest" can be a great option for a wider look and more storage space.
What should be the height of a nightstand?
Typically, the height of a nightstand should be close or equal to the height of your bed so that both surfaces align properly. Anything lower or higher doesn’t make it right. As said, most of the nightstands that you find around are between 24 and 28 inches .
The nightstand dimensions that you find around
Choosing the right nightstand for your bedroom is important. Moreover, it should be the piece that blends with your bed effectively and provides adequate space for certain items. Here are the important measurements that help you find the right one for your bedroom.
The right placement for a nightstand
For easy access, a nightstand should be placed about 3 to 6 inches from the edge of the bed. As a result, it gives you decent space between the bedside table and bed. Also, it keeps the items at close reach. For king-sized and queen-sized beds, it is good to have matching nightstands to create a symmetrical look.
Should the nightstand be taller or shorter than the bed?
It might surprise you but there is no right nightstand because when it is about choosing one, it depends on how tall your bed is. However, the general rule that people follow is that it shouldn’t have less height compared to your bed. Or else, it might be uncomfortable for you to reach out to things on the nightstand.
Nightstands with small dimensions
Small nightstands are a perfect addition when it comes to modern platform beds. In general, they don’t need a box spring and this is what makes them closer to the floor. So, if you have a platform bed, a small nightstand can complement your bedroom.
Factors you should consider before buying a nightstand
Before buying the right nightstand for your needs, you should measure the height of your mattress along with the bed frame. While measuring the height, don’t forget about the desired level that you are looking for. Maybe, you want something that’s of the same level or a few inches taller.
Conclusion
Most people buy a nightstand to improve the aesthetics of their bedroom with a streamlined theme. However, before buying one, you should sit down and think about your bedtime habits. Knowing your bedtime habits will help you determine what nightstand height should work best for you. And, that will help you to buy the right one.
Proper Nightstand Height
As a general guideline, the surface of your nightstand ought to be level with the surface of your mattress, or about 2-4″ taller. It's a lot easier for somebody to attain above to catch something when lying on the bed than to reach below.
Three Main Types of Nightstands
Like we mentioned above, nightstands are available in many different sizes, and we can go on forever if we wanted to list every particular kind of nightstand. Generally speaking. However, three types are most common.
Take Proper Measurements
Before you initiate the search for your ideal nightstand (or two if you need a matching pair), you will first want to assess your mattress's height on its bed frame. Keep in mind, you need your next nightstand to be flat and or a couple of inches taller than your mattress.
Other Considerations When Selecting a Nightstand
Storage Space: How significant is additional storage space to you? Do you want a few added drawers to keep newspapers, your sleeping mask, digital chords, etc.? If so, you may want to stay with a bedside chest or cupboard. A table might look really nice in your bedroom, but it won't certainly work how you want it to.
How high should a nightstand be?
The average height of nightstands on the market today is between 24 and 30 inches. Beds average approximately 25 inches from the floor to top of the mattress. A nightstand should not be more than 5″ higher or lower than the top of the mattress.
What happens if bedside tables are too small?
If your bedside tables are too small or over-scaled, it can change the entire feeling of your room… and not necessarily in a good way.
Is there a standard nightstand height?
Once you start shopping, you’ll soon realize that there isn’t a specific, standard nightstand height. That’s because many bedframes and mattresses vary in height, too… making your bedside table purchase more specific than you might have realized!
How tall should a nightstand be?
Another factor that you need to consider when shopping for a nightstand is its height. The nightstand height should be as tall as the top of the mattress for consistency and for easy access to you as well. If you are using a tall base or even mattress pads, you should match your nightstand with it. For shorter beds, low-profile bedside table or nightstands will be appropriate. Place your nightstand a few inches away from your bed so your bedding will have room to spare if you want to have your linens drape.
What is the Perfect Nightstand Height for Your Bedroom?
Owning a nightstand is like the Goldilocks dilemma. Too short or too tall is just not the right fit. Be it a nightstand, dresser or armoire, you can find the ideal height, width and depth in the table below. To know what to consider while buying a nightstand, read more here.
What is a nightstand made of?
What your nightstand is made of can have a huge impact on the style and overall feel of your sleeping quarters. If you are into traditional style, wooden nightstands or those with iron hardware can be chosen. On the other hand, if you are into contemporary designs, polished metals, as well as those with glass accents, can liven up your space.
How to store things on a bedside table?
Your bedside table can be more than just a place to hold your everyday items, but it can also double as a storage space too. Look for nightstands that have shelves or drawers where you can store all of your necessities within easy reach. An open shelf type can be a good option if you often read a book before bedtime because you can put all of your to-be-read pile of books within easy reach. On the other hand, if you want to hide your personal stuff from sight, nightstands with drawers, or even a drawer chest, are worth investing in.
How wide should a king bed be?
A good example of this is to pair your king size bed with bedside tables that are around 20 inches to 40 inches wide. The nightstand dimensions should be checked before you buy to ensure that it will match the height of your bed or your mattress. If you have been shopping for a nightstand, the average height is between 24 ...
Why should you check the height of your nightstand?
Make sure that you check the nightstand dimensions against your bed or mattress height , to keep things balanced.
What is a bedside cabinet?
Bedside cabinets are multifunctional as they can have a large surface area for your lamp, clock, and the like, with drawers or cabinets for further storage.
What is a nightstand?
It gives you some storage space to keep your books and magazines or underwear with socks. In terms of height, your nightstand is to match your bed frame and mattress sizes.
How Do I Choose a Nightstand Lamp?
If you live in a rented apartment, it might be not possible to replace the furniture. Sometimes, you will be not authorized even to move furniture. California Civil Code does not prohibit it. Only the minimal component specification list is a must. Above all, it depends on your rental agreement.
How to Pick the Right Size Lamp Shade?
Light should shine at the book. If you stand up, top edge of the lampshade would be a bit lower than your sight. So, the lampshade makes about 2/3 of the total lamp shade. It might be twice as wide as the base.
How high should a bedside table lamp be?
What is the correct height for bedside table lamps? Their sizes are to measure up against your bed and mattress dimensions. Commonly, a nightstand lamp has to be about as high as your bedside table. A couple of extra inches could do with it.
How high should a bed frame be?
What is your bed frame height? It might be from 18” to 36”. It depends on the bed style and application. For example, a toddler’s bed is about 20-20 inches from the ground. It commonly comes with a thin (5-8”) mattress that is soft and lightweight. Canopy beds are much higher. They measure up to 36”. What is the correct height for bedside table lamps? Their sizes are to measure up against your bed and mattress dimensions.
How many lux is a good night light for toddlers?
But for natural lighting, artificial illumination is essential. In your bedroom, it should not be too bright. 200-300 lux are enough. You can use the lamp both for decoration and utility. Thus, your best toddler night light is innovative, safe, and colorful. Selecting it, consider: Its height and style.
Is ergonomic furniture good?
These pieces of furniture come as a set. They match and complement each other – proportions and balance matter. Above all, Ergonomic furniture is beneficial. Consequently, nightstand and mattress top should level. It’s handy, for instance, when you want to grab something like a book or a clock from the surface.
