Can you fix an Intex pool that’s unlevel?
Intex pools that have more than three inches off in level are at risk of a collapse. To fix an Intex pool that’s unlevel, you will need to take the pool down, level the ground it’s on, and then reinstall it. While this may not be the news you want to hear, it’s vital that you situate your pool on even grounds.
How do you level the ground for an Intex pool?
Attacking the ground directly and leveling it out is by far the safest and most effective approach if your Intex pool isn’t level. We wrote an in-depth guide on leveling the ground for an above-ground pool, and this process is identical for Intex models.
Can a pool be off level by a full inch?
A pool being off by a full inch is fine and will not cause any major structural issues, but you may notice it is “ off level ” at its waterline. Pools that are unlevel by more than an inch it is going to look slanted. If it is two inches off, you will obviously see the distinction from the outside of the pool.
What does error code 100013 mean on Intex pool?
(Error Code: 100013) Intex pools that have more than three inches off in level are at risk of a collapse. To fix an Intex pool that’s unlevel, you will need to take the pool down, level the ground it’s on, and then reinstall it.
What happens if Intex pool is not level?
Unlevel Intex pools may have one part of the pool lower than other parts, and this unevenly distributes pressure on your pool's walls. A part of your pool may have the highest weight due to it being on uneven ground. This will can cause your wall to collapse and leave permanent damage on your Intex pool.
How off level can an above ground pool be?
An above ground pool needs to be setup on level ground. Manufactures typically state a pool should be level within an inch, while those who are OCD may try to do even better. An above ground pool that is off level by 3 inches or more is unsafe.
How do you fix a lopsided Intex pool?
0:283:24Intex Above Ground Pool Troubleshooting Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf the last beam not fit in the joint raise. The last two beams at an angle this will allow the lastMoreIf the last beam not fit in the joint raise. The last two beams at an angle this will allow the last beam to slide into the joint.
What happens if your pool is not level?
The water will press with more force on one section of the pool than the others. This uneven weight distribution can buckle, twist or even collapse the pool wall, resulting in property damage and injury to anyone in or around the pool when it fails.
How far can an Intex pool lean?
Any more than two inches is unacceptable. Intex pools that are three inches off or more will not last and no one should be swimming in one. Not only does it look very bad, once the uneven wall starts to create the outward pressure one side it will eventually push the pool out of shape more and more.
How do you fix an unlevel pool without draining it?
0:473:19Releveling pool without draining it - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what I did was I put a ratchet strap around the whole pool around the lakes actually to keep theMoreSo what I did was I put a ratchet strap around the whole pool around the lakes actually to keep the legs from bulging out when we do this.
How do you level a pool that's already up?
0:167:01How to Fix an Unlevel Above Ground Pool - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut them back on some solid. Ground. So one of the things I was thinking about doing got a jack IMorePut them back on some solid. Ground. So one of the things I was thinking about doing got a jack I can get some two by fours on either side of this t-posts. Up on the back of it.
Can you level a pool with water in it?
Fill it with soil. Water it down with a hose to make sure that it's packed in there good. If it's not packed tightly, the pool will shift, and you'll have to do it all over again. Refill the pool to your desired level.
What can you put under pool to level?
Concrete is probably the best option since it is usually 100% level and smooth. Also, grass can't grow through concrete and animals and bugs can't damage or burrow through it either. Grass or dirt is also another great option, as long as it has been properly leveled and you've killed off the grass first.
How do you keep Intex Pool legs from sinking?
0:402:07How to prevent pool legs from sinking into ground. Pool setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipI was afraid that this would absorb moisture eventually and would swell up and rot and give away. SoMoreI was afraid that this would absorb moisture eventually and would swell up and rot and give away. So i decided to use a barrel out of plastic.
How do I level my Intex pool?
3:095:44How To Level the ground Intex swimming Pool Area levelingYouTubeStart of suggested clipEnd of suggested clipThe area the preferred method would be to use something like this. And this is called a line levelMoreThe area the preferred method would be to use something like this. And this is called a line level and that line level hangs on a string. Like this and you take this string. And you span it across.
Why is my Intex pool sides are bowing?
The sides will lean in on you while it is filling, this is normal, even though it looks like it isn't. Keep going around and around and around the pool stressing the legs out as far as they will go - or your sides will be all uneven and you will have to drain some of the water to move them.
How do you set up an uneven ground pool?
STEP 1: Determine your location and remove any large rocks or debris. ... STEP 2: Place 2x4s on the site and place a level on top. ... STEP 3: Add or take away soil until the ground is level. ... STEP 4: Repeat the process until the entire area is flat. ... STEP 5: Rake any remaining rocks or debris and tamp the ground.More items...•
Can you level an above ground pool with water in it?
Fill it with soil. Water it down with a hose to make sure that it's packed in there good. If it's not packed tightly, the pool will shift, and you'll have to do it all over again. Refill the pool to your desired level.
Where should the water level be in an above ground pool?
Ideal Water Height Most pool professionals agree that the water level in both in-ground and above-ground pools should be at the midpoint of the pool skimmer. The skimmer is responsible for providing a pathway for water to flow to the filter where it is cleaned.
How unlevel can an inground pool be?
If it's uneven by 2 ½ inches, it doesn't pose a safety hazard. Any larger differences in levels should be fixed as soon as possible. The damage that the water weight can do in an uneven pool usually concerns: Twisting and collapsing of the pool walls.
Do Intex Pools Really Have To Be Level?
Relatively speaking, no. You can still have occasional small bumps, but your guide will tell you that you need to have your ground leveled within an inch of the distance of the pool from end to end. However, you can still have it slightly over an inch unlevel before you notice any issues.
How Should You Level The Ground For An Intex Pool?
This is a great question, and truth be told, most people choose to get it done professionally. However, it’s possible to get decent results on your own. Here’s what you would need to do, once you’ve chosen a spot for your pool:
Related Questions
The best surface that you can put underneath your pool would be thick, interlocking foam pads that are specially made for an Intex pool. If you cannot find those near you, a third-party ground covering or an Intex ground cloth would work just as well. If you have an above-ground pool not made by Intex, do not bother with the ground cloth.
Why is my Intex pool liner not flat?
If your Intex pool is placed on an uneven surface, its liner might not rest flat, leading to folds and wrinkles. This can easily be hooked on your pool tools that will rip or tear the liner.
Why won't my pool be cleaned?
Furthermore, if your swimming pool uses a skimmer and the water isn’t circulating evenly, it won’t be cleaned properly. For instance, the skimmer might be on the then shallow end of the pool, meaning that the water will be sanitized less.
How Unlevel Can an Intex Pool Be?
There’s no official word from Intex on how unlevel their pools can be, but the industry standard for most above-ground pools is this:
How Do You Measure the Level of an Intex Pool?
You can usually tell when an Intex pool isn’t level because it will have a noticeable slant or lean, resulting in the water level being uneven.
Why Is Being Level Important?
Besides being an eyesore, there are a few complications that come from resting your Intex pool on uneven ground, such as:
How To Level the Ground for an Intex Pool (3 Options)
To fix a sagging, sinking, or leaning pool, you’ll either need to move it to level ground or create the level ground. This section will answer the following questions across multiple methods:
How Uneven Can An Intex Pool Be?
Before we get into the matter of leveling things out, we have to be realistic. Intex pools do not have to be perfectly even. Ideally, your Intex’s pools levels will not be over an inch different. However, a single inch might not be that much of an issue—at least, not at the start. As the pool settles, the unevenness will be more pronounced.
How Do You Fix An Intex Pool That Is Uneven?
An uneven Intex pool is something that you need to address as soon as you notice it. In fact, you might actually want to keep an eye on it just to make sure you get it in time. Here’s the full scope of what you may need to do in order to save your pool.
How do I level a pool?
When you get your pool completely empty, remove the pool from the site. Go to your lowest spot and start your leveling process there by removing all the dirt around the circumference of the pool site plus 1ft so you have room to work. Once you are level, then you can put the pool frame back into place to see where your pavers will go. Remove the frame, sink the pavers and level them from paver to paver. Once you are done, you can set the pool up. This is a lot of work considering all the weork you've already done but... it will be right and most of all, safe for all, including your neighbors and property. Take your time and don't take short cuts so you don't have to do it again. Good luck.
What is the cheapest way to insure a level site?
Search here for 'water level' or 'bunyip'. This is by far the easiest and cheapest way to insure a level site.
Can you put pavers under a pool?
The safest way is to drain the water and re-level the area. And yes you DO want to use patio pavers under the legs. Even with pavers my pool still sunk due to soft soil from heavy rains which is why I decided to jack it up and slide another stone under the leg and paver in the areas where it sank.
Can you use a jack to lift a pool?
I've seen a number of people talk about using a jack to lift their pool enough to get a paver underneath the legs. But it seems for every person that suggests this, there is someone who says to drain the pool and start over because of how dangerous it is to try.
Can you jack up a pool?
Drain and re-leveling the ground is the safest way to do things. Yes, you could jack it up but that is just increasing the pressure on that area of the pool and I would not recommend it. I don't have an AG, but I think most folks here put blocks under the legs.
Is it safe to put a 3" liner out of level?
3" out of level is not safe. Undue strain will be placed upon the low side and the legs will eventually buckle and the liner will burst. Trust me, I've seen it happen firsthand.
Can you push out your legs when filing?
You mentioned some legs were pushed out as it filled. Suggest filling a bit and before the water is too deep making sure the bottom foot of each leg is pulled out against the strap so each leg is vertical (not bottom tipped in). Check them a few times while filing because they can move and it doesn't take long before the water is too heavy for you to make adjustments and you'll be stuck with whatever you got.
