What is the widest board a miter saw can cut?
A saw with a 10-inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10-inch saw will cut a two-by-four at a 45-degree angle. Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights.
How wide a board can a sliding miter saw cut?
What is a Sliding Compound-Miter Saw? Sliding compound-miter saws will work just like chop saws, but because their blades move back and forth on horizontal rails, they also can slice stock up to 15 inches wide in one stroke.
How wide of a board can a 12 miter saw cut?
Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees.
Can a 10 Mitre saw cut a 4x4?
So, is it possible for a 10-inch miter saw cut a 4x4? The answer is clearly, yes. But, given the risk/reward ratio due to the extra inches, this isn't a type of cut you should try to do with a 10” blade.
How do you cut a wide wood with a miter saw?
0:060:42How To Crosscut Wide Boards on a Miter Saw - YouTubeYouTubeStart of suggested clipEnd of suggested clipMini miter saws have a sliding feature for cutting wide boards to use it pull the handle all the wayMoreMini miter saws have a sliding feature for cutting wide boards to use it pull the handle all the way toward.
What is the difference between a Mitre saw and compound Mitre saw?
Compound cuts include both a bevel and miter. A compound miter saw adds the ability to make bevel cuts in addition to its mitering ability. You'll want to make sure you have this feature anytime you work with crown molding or other trim that gets installed on a wall.
How do you Mitre a wide skirting board?
1 AnswerClamp the box to a table.Place a board at least as thick as the bottom of the mitre box behind the box. ... Place the material to be cut on the board and hold it against the mitre box.Use a saw long enough to reach across the mitre box + work + cutting stroke.
Is there a 14 inch miter saw?
Makita's largest miter saw, this model features a 14-inch blade diameter that allows it to cut through larger materials easily and efficiently. Other special details include a two stage safety switch, a durable cast iron base and a quick release vice. 14-inch Miter Saw with Quick Release is rated 5.0 out of 5 by 2.
Can a Mitre saw cut plywood?
For table and miter saws, invest in an 80 TPI plywood blade, one designed for cross (miter saw) or rip (table saw) cuts. Then when making your cuts, set yourself up for success. Your plywood should be oriented so that the blade exits the wood on the good face.
What kind of saw do I need to cut a 4x4?
If you need to cut a 4×4 post, then the ideal tool is a large 12” miter saw. This saw has the blade diameter needed to chop through a 4×4 in a single pass, so if this is an option for you it's the way to go.
What size saw will cut a 4x4?
The best way to cut a 4×4 post is by using a 12-inch miter saw, 10-inch radial arm saw, both of which can cut completely through a post in one pass, or a standard circular saw that can make precise cuts in two passes with the help of a simple jig.
Can you cut a 4 by 4 with a miter saw?
The two best miter saws to cuts a 4×4 post uses either a 12-inch or a 10-inch blade on a sliding miter saw. Both power saws have the cutting capacity to cut a 4×4 in one pass. A single pass is preferable to maintain the straight lines and integrity of the cut.
Understanding The Word “Size”
When it comes to a miter saw, the size originally indicates the diameter of the blade mounted on the saw. The size of the blade usually ranges from...
What Size Board A 10-Inch Miter Saw Can Cut?
A miter saw that uses a 10-inch blade can deliver right-angle cuts off a board that is 5.5″ wide, which should be sufficient for a piece of two-by-...
Should You Use A 10-Inch Saw For Your Woodworking Project?
Well, that depends on the requirements of your carpentry project, and of course, your own craftsmanship. If you are a Do-It-Yourself carpenter or j...
When A 12-Inch Miter Saw Is More suitable?
As with any working tool or equipment, one thing is common that an average woodworker’s favorite saw may not be the desired tool for a professional...
Choose Your Saw Carefully
Before you actually start cutting the wide board with your miter saw you should know something. Always make sure you have selected the right type of saw for the job. Normally people use table saws to cut through wider objects.
Mark the Exact Length
After deciding the miter saw and its blade for the job the next thing to do is to make accurate marking. Every single project needs proper measurements because you will need to cut different pieces of the required size.
Ensure Proper Safety
After selecting the saw, a good saw blade and marking the piece right where you want to cut it. This next step is to ensure proper safety before starting to work on the project.
How to Cut Wide Boards With Miter Saw
Cutting wide boards with a miter saw might be easier than you think. However, you need to know the right technique in order to complete the task efficiently.
Some Additional Tips
Now that I have already mentioned a step by step method on how to cut wide boards with miter saw. I would like to give you a few more tips that can prove quite helpful during the project.
Frequently Asked Questions and Answers
A miter box may prove quite helpful for some projects like picture framing and stuff. However, I don’t recommend using a miter box for cutting a wide board. It is because the board size may be too large for the box to fit in. Therefore you can’t cut a wide board with a miter box.
Last Minute Thoughts
If you want to learn how to cut wide boards with miter saw then you are in the right place. I have covered this topic in as much detail as I could. I have mentioned the best way to cut wider boards with a miter saw without any issue at all.
How deep can a sliding miter saw cut?
Compared to a non-sliding miter saw, you can expect to see almost double the cutting capacity. You may cut up to 2 inches deep, and 12 inches when crosscutting wide boards and sheets. Sliding miter saws are really worth the extra bucks if you want to be able to work with a wider range of sheet sizes. Preview.
What size blades do miters use?
Miter saws with 10 inch blades continue to be the most popular size. But is it really a personal preference or just a forced choice on the part of the manufacturers? Let’s have a look at the 10 inch sliding miter saw cut capacity and performance when compared to 12 inch blades and non-sliding 10 inch blades.
What is the difference between a stationary and a sliding miter saw?
Sliding and stationary miter saws look very similar on paper but it’s the sliding feature that makes a world of difference between the two. Sliding miter saws let you tilt the saw head forward and backward which means you’re able to tackle thicker materials with them.
Can you crosscut with a 10 inch blade?
While a non-sliding miter saw may only let you crosscut a board 6 inches with a 10 inch blade, a sliding miter saw will let you cut almost twice as much. Of course, it depends on the blade whether you can do this in one clean cut or in two cuts starting from both ends. There are many 12 inch sliding miter saws available so why should you settle ...
Can you use a 10 inch miter saw to cut 2x4?
While the 10 inch blade on a sliding miter saw can get the job done, if the wood is really dense you might still need to make two cuts instead of one. You can also use a 10 inch sliding miter saw to cut 2×4’s at a 45 degree angle.
Can you use a 10 inch blade on a 5.5 inch board?
You can use a 10 inch blade to make right angle cuts on a 5.5 inch wide board. This means that you’ll have no problem working with 2×6 pieces of lumber. However, the thickness of the wood is not the only factor here. While the 10 inch blade on a sliding miter saw can get the job done, if the wood is really dense you might still need ...
Can you use a stationary miter saw for a stationary miter saw?
While you may find a stationary compound miter saw to be enough for small projects, you will need a sliding miter saw for cutting longer, wider, and thicker sheets. Considering that it can do everything a stationary saw can do and more, it might be a good idea to make it your primary tool.
What is a power miter saw?
The power miter saw is a useful tool that allows woodworkers to make quick, accurate miter cuts at consistent angles. A miter saw blade is mounted to make vertical cuts across a board at a right angle or pivot sideways for miter cuts.
What is the best saw for 2 by 6 lumber?
Miter Saw. A saw with a 10-inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10-inch saw will cut a two-by-four at a 45-degree angle. Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights.
Can a sliding compound miter saw cut a wider board?
This allows you to cut wider boards than does a fixed blade, although the thickness a saw can cut does not change. The maximum cutting width depends on the design and length of the track. av-override.
How wide can a 12 inch miter saw cut?
Saw with the sliding arm can cut much wider although the maximum depth remains the same. For instance, a 12-inch sliding compound miter saw will cut 2 x 16 wood in 90 degrees (crosscut), and when set at 45-degrees it can cut up to 2 x 12 lumber.
What size is a miter saw?
Miter Saw Sizes. The size of the Miter saw denotes the diameter of the miter saw blade used. They are available in 8-inch, 10-inch, and 12-inches. There is even a 15-inch miter saw from Hitachi for those who need a really large and powerful saw.
What size miter saw should I use for crown molding?
Let’s say the crown molding that you are cutting is around 4 or 5-inches. In that case, I would recommend using a 10-inch miter saw. If, on the other hand, the crown molding is on the bigger side; such as around 6 or more inches, then you should use a 12-inch miter saw.
What is the difference between a miter saw and a smaller miter saw?
A miter saw with large sized blade (12-inches and above) can make wider and deeper cuts, while a smaller sized miter saw (10-inches and below) is more economical and easy to handle. Miter saws, like most saws, come in a variety of sizes. More specifically, the blades on the saws come in different sizes.
Why use a sliding compound miter saw?
And the reason that you want to use a sliding compound miter saw on especially wider pieces of material is because the sliding saw blade makes it a lot easier to maneuver around and accurately cut those large pieces of material. In any case, get a compound miter saw with dual bevel.
What size miter saw should I use for baseboards?
Miter saw for baseboards. Unless you are cutting very large baseboards, I would recommend sticking with a 10 or 12-inch miter saw. A 10-inch miter saw can very easily and very accurately cut 6-inch baseboards. However, if you already have a 12-inch miter saw, that is perfectly fine for cutting baseboards.
How much saw do I need to cut laminate flooring?
Laminate flooring can be on the tougher side, so I would recommend investing in a 12-inch saw simply for the extra cutting power that it offers.
Can a Miter Saw Rip Boards Lengthwise?
For precise, consistent angles, a miter saw is a crucial tool for all woodwork experts and carpenters.
Are There Miter Saws That Cut Lengthwise?
To make level cuts, a miter saw works by pulling a saw blade spinning down onto lumber or workpiece in a short controlled movement.
Using Your Miter Saw Correctly For Maximum Lengthwise Results
Having determined that miter saw are not efficient for cutting lengthwise, it’s important to learn how to use your miter saw correctly to enhance your productivity and get a clean, sleek cut with less hassle and time.
Choose the Saw Carefully
Before cutting the wide board with the saw, you need to ensure that it’s the right tool for the job. Wider objects are often cut with a table saw. That’s because there aren’t any fences or handles to block the workpiece. You just pull the board against the saw blade to rip through the piece easily.
Mark the Length
Once you decide on a miter saw and blade, you must make accurate markings. Each project requires appropriate measurements because you’re cutting different pieces to the right size.
Ensure Safety
After marking the piece to the correct size, you should focus on your safety. Power tools can be dangerous if they’re used improperly.
Why trust Handyman.Guide?
This article was written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.
