Authentic wood board and batten is significantly more expensive and difficult to install than its contemporary successors. If you’re willing to front the cost, however, you can expect many years of quality from the investment. Installation woes aside, board and batten is an undeniably attractive alternative to standard lap siding or shingles.
Full Answer
What is board and batten siding?
Why is board and batten siding important?
What is the most common type of siding?
What does new siding do?
Can you use fiber cement on lap siding?
Can lap siding be used on a narrow house?
Can board and batten siding be installed on bump outs?
See 2 more
Is board and batten more expensive than horizontal siding?
No, since board and batten siding is made of wood and relatively complex to install, it's typically more expensive than horizontal vinyl siding. Board and batten can range anywhere between $5 and $12 per square foot while horizontal vinyl siding usually costs between $2 and $6 per square foot.
What is the cheapest siding for a house?
Vinyl siding is almost always the least expensive way to side your home. You can even find vinyl siding for as cheap as $2 per square foot. Of course, you're going to be looking at your home's siding for many years to come, so it's important to balance the cost with what material you like looking at.
Does board and batten siding cost more?
It's designed to keep its original color consistency regardless of the elements, so steel board and batten siding does not need to be repainted as often as wood or fiber cement siding. Due to the extreme dependability and durability of steel, costs are a bit higher at $3 to $8 per square foot.
Is board and batten cheap?
Board and Batten is a super easy and inexpensive way to achieve that goal. In Fact, this entire project was done for $30!!! My front room needed some love.
What is the cheapest exterior wall covering?
Vinyl siding is one of the lowest-cost siding options from a material and installation perspective. For strictly material, vinyl siding costs $0.85 to $2.50 per square foot. Due to its low material cost, it's a fairly popular option in North America.
How can I save money on siding?
Plan Your Siding Project During Off-Season Months The more you plan your siding project, the more opportunities you'll notice to cut down on costs and expenses. While you can get your siding installed year-round, there's one season that's touted as the best time to save money on your quote: in the fall.
Is board and batten going out of style?
Stay: Board and Batten Exterior The modern farmhouse style for interiors is still going strong, says experts at Houzz, the online home remodeling and design source. And more builders are turning to tried-and-true, board-and-batten exteriors to add texture and interest to an otherwise flat facade.
Does board and batten add value?
Can Board and Batten Add Value to Your Home? Yes, it can. Board and batten is custom millwork. If done tastefully, it can add value to your home by giving it a more custom look.
How much does it cost to have board and batten installed?
Board and Batten Siding Cost per Square Foot Material boards cost between $1 and $10 per square foot. Including labor, the total cost to install board and batten siding averages $2.50 to $12.50 per square foot.
What goes behind board and batten siding?
Board-and-batten can be installed onto solid plywood or OSB sheathing, though if your sheathing is not solid, you will need to first attach horizontal furring strips. In general, you can expect to spend about a day installing 800 square feet of siding if you have a helping hand.
What wood is best for board and batten?
CedarCedar is a good lumber choice because it is soft; harder wood, such as pressure-treated pine, will not seal as well and is more likely to crack. Board and batten is commonly used in farmhouse style homes, but it also looks well with minimalist, modern, and transitional styles.
How far apart should board and batten be?
Studs are usually located every 16-inches or every 24-inches, depending on your home and frame. Position the boards so that they cover 48-inches at a time, and nail either 16 on center or 24 on center to ensure a secure and successful installation.
How much does it cost to vinyl side a 1500 sq ft house?
The average cost for vinyl siding installation on a 1,500 sq ft. home can range from $4,658 to $5,795. The cost for vinyl siding is usually around $3.50 per square foot. A high quality vinyl siding would increase the price and you could expect to pay as much as $7 per square foot.
How much does it cost to put siding on a 2000 square foot house?
Siding costs between $3 and $11 per square foot with the average homeowner spending $4,300 to $15,800 to install on a 2,000-square-foot home.
Is Hardie board cheaper than vinyl siding?
For starters, Hardie board is more expensive than vinyl. The actual cost of the material depends on its quality, but it's important to remember that the more you spend, the better you can expect your new siding to withstand the elements. Hardie board also requires more labor for installation.
What is the cheapest type of vinyl siding?
What Is the Best Value Siding? The most inexpensive vinyl siding is available at $1.60 per square foot. Plain panels (both vertical and horizontal) and board and batten panels are the cheapest. Choose uninsulated for even lower costs, but consider the disadvantages to these styles.
What is steel board and batten siding?
Steel board and batten siding is a unique way to get the look without a lot of the issues that the other materials have. Steel board and batten siding is produced into molded sections that are installed more quickly and easily than the separate boards and battens. This creates a much smoother and more energy-tight installation than the use of separate pieces, and can be done faster and with less manpower than a fiber cement installation.
What is board and batten siding made of?
Originally, board and batten siding was made from wood, but times have changed, and it can now be found in a variety of different materials. Each of these has its pros and cons like all materials, which can impact how your home looks and functions.
What is board and batten used for?
Board and batten can be used to cover the entirety of a home, or it can be used with other materials such as log siding, lap siding, or shingles to create a unique and stylish look for a home.
Is wood siding good?
Wood is still one of the most frequently used materials for siding, mostly because it’s been around for a while and people understand it, and it’s often inexpensive to install. The problem with wood, however, is that it’s extremely expensive in the long term. It requires a great deal of maintenance and upkeep to look its best.
Average cost for board and batten siding
The below prices are based on the cost to install board and batten siding to an average 1,500 square foot house
Board and Batten Siding Styles
There are three main styles when it comes to siding for houses, they are:
What Cost Factors Are There with Board and Batten Siding?
There are a number of factors that will determine how much you end up spending when installing board and batten siding on your house, among them:
What Is Board and Batten Siding?
Board and batten siding is a style of siding where large siding pieces known as boards are combined with thinner pieces known as battens to create a consistent and classic pattern.
Advantages of Board and Batten Siding
Board and batten shines when it comes to aesthetics. With the right combination of boards and battens, your home’s exterior will look modern and classy. You can even choose to use contrasting colors for the boards and battens for an even better and modern look.
Disadvantages of Board and Batten Siding
The main disadvantage with board and batten siding style is the limited number of materials you can use. Ideally, only wood is suitable for board and batten siding otherwise it may not look authentic. The only alternatives you can go for are synthetic materials that are made to look like wood such as vinyl.
DIY Or Hire A Pro?
It’s not easy to install board and batten siding as a DIY project. As mentioned above, you’ll need to be an expert in measuring and positioning the boards and battens when using this style. It’s best to get a professional to install it for you for the best results.
What is the best siding to replace wood board and batten?
If you’re looking for a low maintenance alternative to wood board-and-batten siding, consider steel siding from TruLog in place of Hardie Board. Fiber cement may be a lower maintenance option than wood, but it’s still not as easy to install or as long lasting as steel . Get a truly low maintenance alternative with steel siding ...
What is board and batten siding?
Board-and-batten siding, which offers a vertical placement and more rustic appearance can often be the answer. While board-and-batten siding was originally created from wood, its popularity eventually meant that consumers started to look for other, lower maintenance options.
What is a hardie board?
Hardie Board is a type of fiber cement siding, made from a blend of sand, silica, cellulose fibers, and Portland cement. It’s a heavy material that can be molded or shaped to match nearly any type or style of siding, including most classic wood sidings such as board-and-batten. When compared to wood siding, which can swell, warp, crack, ...
What is the best siding for a house?
If you’re looking for a truly durable and low maintenance option for your home with an attractive board-and-batten appearance, there is steel siding. Steel siding is much lighter and easier to install than fiber cement, and the board-and-batten style isn’t made up of several different components like fiber cement either, ...
Is hardie board good for a home?
Hardie Board does have a number of drawbacks that may mean it’s not always the right material for your home. First, it is made from cement, so Hardie Board is very heavy and difficult to install. Considering the fact that board-and-batten means first installing the wide, heavy planks vertically, then placing and installing a batten over them, ...
Is TruLog siding real wood?
Best of all, steel siding from TruLog has an authentic wood look and texture to it. Your home will have the appearance of a real wood, board-and-batten sided home, but with all the benefits of steel.
Is Hardie Board better than wood siding?
When compared to wood siding, which can swell, warp, crack, and need regular maintenance in terms of scraping and painting, Hardie Board can seem like a much better alternative. It’s a lot more durable than wood, and doesn’t swell, warp, or crack, so it tends to last a lot longer without needing repair. The color also tends to last longer ...
How much does vinyl siding cost?
On average, vinyl siding costs between $6.50 and $12.50 per square foot installed, which even on the high-end is considered low compared to most other house siding options.
What wood is used for lap siding?
Traditionally, oak, pine and spruce are the natural wood grains that are used in this style, but really any wood grain can be used for lap siding. This is the most common style on homes in North America. It is usually what other materials (such as vinyl and fiber cement) mimic to blend in with other homes in the neighborhood or region.
What is the best material for siding?
There are several different material options for house siding: wood, metal, stone, vinyl, brick, fiber-cement, stucco and more. But, looking at the materials for siding is just scratching the surface! Delving deeper, we see many more options and sub-options.
What is the ROI of engineered wood siding?
ROI (Cost-to-Value Return) for the Engineered Wood siding is nearly 79% (cost-to-value return), which is higher than the natural wood’s 77% cost-to-value return normally recouped at resale.
How thick is half log siding?
Because not all split logs are the same size. Half log siding is 3 inches thick, between 6 and 12 inches wide (uniform width within an order) and 8 to 16 feet long. While this is clearly half of a log, some sellers may reference this as “full log” due to the other product, known as quarter log siding.
How much does it cost to install wood siding?
On average, natural wood siding costs between $8.50 to $14.50 per square of natural wood siding installed, depending on the project scope and complexity, trim options, and your home’s location.
What is vertical board siding?
This is also known simply as vertical board wood siding, or sometimes referred as barn-style. Vertical panels (boards) are lined upside by side, and all seams are covered by a strip called the Batten. The pattern is usually done in a uniform way, to convey a sense of craftsmanship.
What is board and batten siding?
Board and batten siding is one of the oldest siding styles in the United States. It was first introduced when sawmills became common and homeowners wanted an exterior material that could offer better protection and fewer gaps than log homes. Board and batten siding is made up of two different pieces. Wide planks are installed first, running ...
Why is board and batten siding important?
Since board and batten siding is made up of two pieces, it’s important to choose a highly durable and low maintenance material when installing this style.
What is the most common type of siding?
Two of the most common styles of siding on the market today are lap siding and board and batten. Both can be used alone or together to give your home a beautiful new look, but they are two very different styles that will give your home different appearances depending on how and where you use them.
What does new siding do?
New siding can give your home a fresh new appearance, especially with the number of choices that are available on the market today. However, all of those choices can lead to confusion and a feeling of being overwhelmed when you need to consider the style and appearance of the siding you choose. Two of the most common styles ...
Can you use fiber cement on lap siding?
With fiber cement, you don’t need to worry about your siding the way that you may have to with wood.
Can lap siding be used on a narrow house?
In the same way that board and batten can lengthen the appearance of a home, lap siding can be used to elongate the appearance of a property, drawing the eye along it horizontally. This can be complementary to narrow properties, as well as to properties that have a lot of changing detail or decorative trim that needs a classic and unobtrusive siding to be installed alongside it.
Can board and batten siding be installed on bump outs?
Board and batten siding can be installed on bump outs and below peaks and gables to help show them off better, while the lap si ding can become a backdrop for the rest of the home. Used this way, it helps call attention to the two different styles of siding, putting more emphasis on them both. It’s also possible on homes made up ...
