On the other hand, since 2004, it has been gradually replaced by turbodiesel 2.0, which has its roots in the attention of the French PSA – this is a very good engine, especially if you take into account the modifications after the 2011 modernization.
What kind of engine does Ford use in its trucks?
The Ford 5.4 engine is a 5.4-L engine that’s a naturally aspirated V8. Ford uses it in full-size SUVs and pickup trucks. It features a single and dual overhead cam setup with a V configuration.
Is a Ford 42 V6 a good engine?
The Ford 4.2 V6 engine is a popular option among truck owners because it offers ample power and torque at low RPM levels, which can be beneficial in towing heavy loads. Is Ford 4.2 V6 a Good Engine? Ford 4.2 V6 is a good engine due to its advanced features and significance. It has the best horsepower 205 and torque around 250 pound-feet.
What kind of engine does Ford use in the GT500?
Sportier models like the GT500 and Ford GT were outfitted with high-performance 4-valve engines. Older models manufactured before 2004 generally have 3-valve engines, while most Ford vehicles made after that year are the 3-valve version. Most 5.4 L engines are found in trucks. ‘Murica! How reliable is the Ford 5.4 V8?
How many CID is a Ford 351 engine?
It comes in at around 330 CID, which is smaller than the 351 that is typical of 5.7-L vehicles. For the most part, you can consider the 5.4-L Ford engine to be a small block engine. Does Ford still make the 5.4 engine?
What years did the Ford 5.4 have problems?
Unfortunately, there have been some commonly reported issues with Ford's 5.4L V8 engine over the years. One of the most common complaints is with this engine configuration having problems with its spark plugs in certain Ford F-150 trucks, including the 2004 F-150.
How many miles will a Ford 5.4 last?
We researched this popular engine from multiple professional sources, so you'll know what to expect out of it. If properly maintained, the Ford 5.4 Triton engine will last between 150,000 and 300,000 miles. Getting to these mileage milestones will require you to: Regularly maintain the vehicle.
What year is the best Ford 5.4 engine?
2009-2010 Triton 5.4L The 5.4-liter V8 improved in 2009, fixing the cam phaser issues and all but eliminating the spark plug problems. With 300 horsepower and 365 lb-ft of torque, the Triton 5.4L is one of the most reliable F150 engines.
How much horsepower does a 54 Triton have?
550 @ 6,500 rpmFord 5.4L Triton Engine - SpecificationsMetricValueCompression ratio9.0:1 (2 valves) / 9.8:1 (3 valves)Max power @ RPM550 @ 6,500 rpmMax torque @ RPM500 lb-ft @ 3,750 rpmCylinder HeadCast aluminum4 more rows
What year did Ford 5.4 have spark plug problems?
The known Ford 4.6 spark plug problem years are between 2004 – 2008, especially the V8, 3-valve versions, and F-150 models. When did Ford fix the 5.4 spark plug issue? As the 5.4L engines were built in 2004, it caused issues in models from 2004 – 2006, but by 2007/2008 it was said to have been repaired by Ford.
What year F-150 to avoid?
What year F-150 to avoid? Amongst Ford enthusiasts, there is one year that people know to avoid with the F-150 and that is the 2004 model year. These are considered to be the worst F-150 trucks that were ever made for a few different reasons.
What is the most reliable Ford truck engine?
With so many to choose from, which one is right for you? The top 4 best Ford truck engines include the 5.0L TI-VCT V8, the 3.5-Liter EcoBoost V6, the 3.3-Liter TI-VCT V6, and the 3.0-Liter Power Stroke Turbo Diesel. Read on to find out which engine is best for you and your Ford truck!
Is Ford 5.4 good?
Anyways, the 5.4L Triton is a pretty reliable engine. Keep up with maintenance and repairs as they pop up, and chances are the 5.4 V8 will hold up beyond 200,000 miles. There's a reason Ford stuck with these engines for roughly 2 decades.
What is the best Ford engine ever made?
The 7 Best Engine Ford Ever MadeFord's Flathead V8 Engine.289 V8 Small Block Engine.Ford 428 Cobra Jet Engine.Ford Boss 429 Engine.EFI HO 5.0 Engine.Voodoo V8.Ford Eco-Boost Engines.
How many miles per gallon does a 5.4 Triton get?
2004 Ford F150 Pickup 4WDVehicleEPA Fuel EconomyEnergy Impact Score2004 Ford F150 Pickup 4WD 5.4 L, 8 cyl, Automatic 4-spd, Regular Gasoline14 MPG 13 17 combined city/hwy city hwy 7 gal/100 mi21.3 barrels/yr364 - 420 miles Total Range2004 Ford F150 Pickup 4WD 5.4 L, 8 cyl, Automatic 4-spd, Regular Gasoline11 more rows
How much does a 5.4 Triton engine cost?
Purchasing a new motor is a huge expense. Because of this, understanding the investment in rebuilding the one you already have is essential. Rebuilding a 5.4 triton motor can cost anywhere between $1,800 and $5,000.
Is the Triton 5.4 V8 a good engine?
Anyways, the 5.4L Triton is a pretty reliable engine. Keep up with maintenance and repairs as they pop up, and chances are the 5.4 V8 will hold up beyond 200,000 miles. There's a reason Ford stuck with these engines for roughly 2 decades.
How much does it cost to replace a 5.4 engine?
The average cost of rebuilding a 5.4 triton motor is $3,800, though it can range from as low as $1,800 to as high as $5,000. If this seems like a lot, remember that replacing the entire motor can cost you between $6,000 and $7,000, so rebuilding it is usually worth it.
What is the highest mileage on a Ford?
2010 Ford Focus – 345,000 Miles It was then brought to Michigan by the second owner, who drove it around 43,000 miles a year until it got to its present state — 345,000 miles, making it the highest-mileage non-SUV/truck/van Ford model listed for sale on Autotrader.
What year did Ford stop using the 5.4 engine?
Does Ford still make the 5.4 engine? Yes, and no. The engine, which was first produced in 1997, was used in the F-series through 2010.
What is a 5.4 liter engine?
Ford 5.4L V8 Triton Engine Review. The Ford 5.4 Triton V8 is a part of Ford's Modular V8 engine family, a 5.4-liter naturally aspirated eight-cylinder gasoline engine, which was first introduced in the 1997 Ford F150. The 5.4 engine basically is a stroked version of the 4.6-liter version since the architecture of both engines is very similar.
Where is the 5.4 engine made?
The 5.4 2V engine was produced at the Windsor Engine Plant in Windsor, Ontario. The 5.4 3V version was first introduced in Australia and used on the 2002 Ford Fairmont under the name Bara 220. On the North American market, that engine debuted together with the redesigned 2004 Ford F-150 model. Ford 5.4L Triton 3 valve engine has redesigned cylinder ...
What are the problems with a 5.4 Triton engine?
Like Ford's 4.6L V8s, the Modular 5.4L Triton engine has similar common problems for their engine family, which included blowing spark plugs and spark plug threads stripping (1997-2003 model years), stuck spark plugs due to a gap between the plug and the cylinder head which gets filled with carbon deposits (typical for 2004+ model years), and intake manifold cracking and leaking ( poor design of plastic intakes). But it should be noted that these problems cannot be called widespread, and 5.4 Triton V8s have earned a good reputation in terms of reliability and longevity among the majority of owners.
How many miles does a 5.4 Triton engine last?
With proper fluid changes and regular, scheduled maintenance, any 5.4-liter Triton engine will serve well over 200,000 miles (320,000 km).
What was the first engine?
The first engine, introduced in 1997, was a SOHC 2-valve 5.4L V8. It has a cast iron cylinder block. While the engine shared the bore diameter with a 4.6L version, the increased stroke demanded a taller engine block deck height - 10.079 in (256.0 mm) compared to 8.937 in (227.0 mm). The internal components include fracture-split powder metal ...
How reliable is the Ford 5.4 V8?
While the Ford 5.4 V8 may not be perfect, any engine capable of lasting 300,000 miles or more with proper maintenance can certainly be called reliable in my book. As you read in my writeup of the most common Ford 2.7 L EcoBoost problems, I referred to the 5.4 as a better (more reliable) alternative. It’s that good.
How long does a Ford 5.4 last?
On average, a Ford 5.4 engine will last between 150,000 and 300,000 miles. However, this mileage will vary depending on maintenance and other factors (such as the environment you drive in) . With proper care, some Ford 5.4 engines can last up to 450,000 miles or more. Whoa.
What engine breaks easily when removed?
The spark plugs of the 3-valve 5.4 L Ford engine are known to break easily when removed.
How many miles does a timing chain tensioner fail?
The timing chain tensioner and variable valve timing (VVT) mechanism are known to fail at about 100,o00 miles.
What temperature does a 5.4 L engine go out the window?
RIP to your 5.4 L engine if you live in a cold weather climate. Ford says it’s vehicles are “Built Ford Tough”, but that all goes out the window when it’s -20F for months on end.
How long does a truck last?
A well-maintained truck that pulls heavy trailers has the ability to last 250,000 miles or more. Those who use their truck as transportation and not much else could see their engine life reach 450,000 miles or more (provided the truck is maintained well).
How to extend the life of an engine?
Sticking to a thorough maintenance routine will help extend the life of any engine. Failing to do so can cause an engine to die far sooner than it should.
When did the Ford 5.4 come out?
The earliest release of the Ford 5.4 engine does not come with four valves but a 2-valve instead. This engine was introduced in 1997 and shared the same bore as the 4.6 version but with a longer piston stroke. On top of that, the block deck height is taller due to the demands of a longer stroke.
What year did the Ford Fairmont 5.4 Barra 220 come out?
The engine’s first application was on the 2002 Ford Fairmont under the name of the 5.4 Barra 220 engine in Australia. In North America, the engine was launched alongside the redesigned 2004 Ford F-150 model. It received a lot of improvements not only on the number of valves but also performance-wise.
What is the compression rating of 5.4 Triton?
The 3-valve 5.4 Triton has restyled cylinder heads with two intake valves and a large exhaust valve per cylinder. It has a higher compression rating of 9.8 and a bigger oil capacity. This engine was assembled at the Essex engine plant at first but was moved to Windsor Engine Plant.
What is a 5.4 Triton?
The Ford 5.4 V8 Triton is a member of Ford’s Modular V8 engine series that replaced the 5.8L. It was a naturally-aspirated, eight-cylinder gasoline engine introduced in the Ford F150 in 1997. It is a naturally-aspirated engine with eight cylinders. It is sometimes addressed as the stroked version of the 4.6 Triton due to its almost similar features and builds.
What is the bore diameter of a Ford 5.4 Triton?
The Ford 5.4 Triton engine has a bore diameter of 90.2 mm and a piston stroke of 105.8 mm. Due to its increased stroke length, the design of the engine block was made to accommodate the change. In line with that, the connecting rods used were also lengthened to achieve the 1.60:1 rod to stroke ratio.
What is the problem with the 5.4 Triton?
The most common and widely recognized issue of the 5.4 Triton engine is the engine’s faulty ignition system. It is hard to have this issue because you’ll never know when it will strike, and it is pretty annoying. With that, the issues regarding the ignition system of the 5.4 V8 affected the horizon of all engines.
What year was the Ward 2 valve engine?
The 2-valve SOHC engine was named Ward’s Ten Best Engines list in 1997-1998 and 2000 to 2002.
What cars use the Ford Mustang engine?
While this engine was originally designed to power large trucks and SUVs, it was also used to power sports cars like the Ford Mustang Cobra R (2000), the Ford Shelby GT500 (2007-2012), and the Ford GT. It also went under the hood of the Ford Falcon (2002 – 2010) sports sedan dedicated to the Australian market.
What is a 5.4 liter engine?
Ford 5.4L Triton Engine. The Triton is a 5.4-liter naturally aspirated V8 engine from Ford Motor used to power full-size trucks and sport utility vehicles like the Ford F-150, Ford Expedition and Lincoln Navigator.
How much does a 54 Ford Club membership cost?
Best thing you could do is join the '54 Ford Club of America where there is a wealth of information available for a mere $25 a year, which includes 4 quarterly newsletters and the '54 Ford Club Facebook page and forum. Note: you can go directly to each one without paying dues, but we would appreciate the support. You can also go to the HAMB site and gain a great deal of knowledge.
How old is a Ford 289?
The Ford 289 is 50 years old. Your 239 is 60 years old. Not that much difference really. In 10 years the 289 will be as old as the motor you have now, and it will still be the wrong motor. Now if he suggested a 4.6 or some motor made in the last 10 years it would make a little bit of sense. A little bit, not much.
Is it critical to swap an engine on a 4 door?
I wouldn't worry a bit about resale value on the engine swap as unless you are going for an AACA, it is not critical on a 4 door. Additionally, there is a push towards customizing on many of these '50s cars which includes swaps of transmissions, rear ends, intakes, etc.
Can you sell a car with a different engine?
You may not care about resale value with a different engine in it because you will never sell it, but when you are gone, someone is going to have to deal with selling it.
Does oil starvation affect the bottom of an engine?
generally speaking, oil starvation affects the bottom end of the engine more than the cylinder walls. you might not need a re-bore.
Is a 54 239 a good Y block?
The 54 239 is half flat head and half OHV and generally not considered the best of the Y-blocks. I'd move up to a 55 272 which is a much better engine and still 6v.
Why are the 5.0 and 4.6 liter engines not interchangeable?
Despite some commonalities, parts are not interchangeable between the 5.0-liter and the 4.6-liter because there was much that was new.
How much horsepower does a 4.6 liter V8 have?
It was available in virtually every trim level and is a noticeable improvement from the 4.6-liter V8’s 292 horsepower and 320 lb.-ft. of torque.
How much horsepower does a Boss 302 have?
This stallion generated 444 horsepower at 7500 rpm and 380 lb.-ft. of torque at 4500 rpm, fed through a six-speed manual to the rear wheels. Yet it delivered 17 mpg city, 26 mpg highway, according to the EPA. No doubt your mileage will be lower if you take advantage of its finest attributes. The Boss 302 would return for 2013.
How much horsepower does a 2011 Mustang GT have?
But the numbers most cared about were generated under the hood. In the 2011-12 Mustang GT, the new Coyote V8 produced 412 horsepower @6,500 rpm and 390 lb.-ft. of torque at 4,250 rpm. Redline is 7,000 rpm. The engine proves to be so strong, webbing is built into the walls to handle the increased power. In the 2013-14 Mustang GT, horsepower rose to 420 at 6,500 rpm, although torque remained unchanged.
What engine did the 2011 Mustang have?
When a new Ford Mustang arrived for 2011, something equally new was under its hood: the Ford Coyote V8 engine .
What camshaft does a 2010 Mustang have?
Unlike the 2010 Mustang ’s 24-valve, single-overhead-cam 4.6-liter, the 32-valve Coyote 5.0-liter used double-overhead cams, as well as twin-independent variable cam timing–a first for a Ford V8. This allows the intake and exhaust camshaft’s timing to be individually increased or decreased based on engine load and rpm, which improves performance, smooths the idle, reduces emissions, and boosts fuel economy.
When did Ford update the Coyote?
Ford updated the Coyote to coincide with the launch of the fully redesigned 2015 Ford Mustang.
What is a 4.2 V6 engine?
The 4.2 V6 engine uses a lighter and more efficient crankshaft and features a shorter camshaft timing system to achieve higher torque levels yet increases cooling efficiency by reducing induction losses.
What is the name of the 4.2 liter V6 engine?
Another name of the Ford 4.2 liter V6 engine is the Canadian Essex engine. Here are some of its important features.
How much horsepower does a pickup truck have?
For a powerful and working efficient pickup truck, it is the best option. The maximum horsepower of it is around 205hp at 5000rmp. In this way, the average torque produce by it at 3100rpm is approximately 250 pounds-feet.
How many cylinders does a fuel injection system have?
A fuel injection system of the engine in a vehicle usually depends on the manufacturer. It is 256 –cubic inches with six cylinders.
How much fuel does an urban person consume?
Fuel consumption in urban is around 15 liters over 100km. In this way, extra-urban fuel consumption is approximately 11 liters over 100km.
How much oil does a 4.2L engine hold?
4.2L is the engine capacity that is the combination of all six-cylinder. So, the total volume is approximately 4000cm3, and it can hold up to 6 Quart oil. In the combustion chamber, the mixture of air and fuel can enter when each piston rises inside its cylinder.
Is a Ford 4.2 V6 a good engine?
Is Ford 4.2 V6 a Good Engine? Ford 4.2 V6 is a good engine due to its advanced features and significance. It has the best horsepower 205 and torque around 250 pound-feet. It has high-performance potential and better gas mileage, around 15 to 18mpg, and high around 24mpg. It has 6 cylinders, each with two valves, hold a total volume of fuel around 4000cm3.
