Full Answer
Is it safe to use HardiFlex?
If the Hardiflex was manufactured before 1982 then the answer is yes. Anything made after 1982 should be fine. Write your answer... Is hardiflex safe to use? Is hardiflex good to your health? How do you know if hardiflex contains asbestos?
What are asbestos cement sheets?
Asbestos cement sheet products include Coverline, Hardiflex, Harditherm, Highline, Shadowline, and Villaboard as well as: Colorbord - smooth-surfaced sheeting used for interiors and exteriors, coloured on one side.
What is flat sheet fibro asbestos?
Flat sheet fibro was the most common asbestos cement sheeting. It was nailed to a wooden frame for quick and cheap construction and may have been painted over. Asbestos fibres in cement sheeting don’t tend to move if the sheeting is in a complete piece and is not cut or drilled.
How hard is tilux asbestos cement sheet?
The Tilux product may have silver screws holding it in place, or nail heads sitting on top of the sheet. The joins between sheets may be covered with moulded asbestos cement battens (40mm x 6mm or 75mm x 8mm), wooden ‘D’ mould strips or silver metal strips. Asbestos cement sheeting can feel hard and brittle.
Does HardiFlex contain asbestos Philippines?
Free of asbestos, HardiFlex® Senepa cement fascia board is resistant to damage caused by fire, moisture, termite infestation, humidity, hot weather and cold and windy climates — when installed and maintained correctly.
What kind of material is HardiFlex?
HardiFlex board is made of fiber cement board, which is made from materials developed from a mixture of Portland cement and cellulose fibers and has the advantages of non-causing toxic substances, flexibility, and tougher quality, allowing it to withstand weathers ranging from strong sun to heavy rain.
Can HardiFlex be used as roofing?
Yes. HardieFlex® sheets with a minimum thickness of 4.5mm can be used for internal walls in residential applications. It can also be used for other applications such as ceilings and eaves.
How old is HardiFlex?
Hardiflex (1981) Hardiplank (1981) Villaboard (1981) Versilux (1982) Harditherm (1984) Compressed (1984) Drain Pipe (1984) Super Six (1985) Highline (1985) Shadowline (1985) Coverline (1985) Pressure Pipe (1987) Roofing Accessories (1985) 2 Page 4 In cases of fragments or products, such as cement sheeting, that are not ...
Is it OK for Hardiflex to get wet?
Once installed, HardieFlex sheets are resistant to damage caused by moisture, so there is usually no need to replace your wall or ceiling if some moisture gets in.
What is Hardiflex for ceiling?
HardieFlex® Ceilings are flexible and may be used in curved seamless and panelized or tiled designs. It can also be used for wet area applications (such as areas of bathroom, kitchen, laundry area).
Can you paint over Hardiflex?
Answer. As long as you use the recommended water-based paints, you can directly apply paint to HardieFlex sheets after all the joints and fasteners have been covered.
Is Hardiflex a cement board?
HardieFlex® Fiber Cement Board 4.5mm is the best ceiling solution for internal residential applications greater than 6sqm, and as a standard solution for internal walls exposed to low traffic. It is fire-resistant and deemed to be non-combustible.
Is fiber cement board good for roofing?
1) Fibre Cement Boards When it comes to the best material for roof underlayment, fibre cement board came up as the best option over the other material because the right underlayment for your roof will keep moisture, cold weather, and stifling summer air out, giving your roof a longer life.
When did James Hardie stop using asbestos?
March 1987In March 1987 James Hardie ceased all asbestos manufacturing activities. As concern grew about the serious adverse health effects of asbestos, in the mid-1980s James Hardie developed an asbestos-free fibre cement technology, without the dangers associated with asbestos.
Is fibro cement asbestos?
Fibro sheeting that may contain asbestos is still present in many homes built before 1988. It was usually used as wall cladding, in eaves and in wet areas such as bathrooms and laundries. Modern fibrous cement sheeting uses cellulose fibres instead of asbestos fibres and is considered a safe building material.
How much does Hardiflex cost?
HARDIFLEX PRICE LISTITEM NO.DESCRIPTIONPRICE1HARDFLEX4552HARDFLEX5333HARDFLEX7544HARDFLEX1,1311 more row•May 17, 2020
What is a Hardiflex?
HardieFlex® Fiber Cement Board 4.5mm is the best ceiling solution for internal residential applications greater than 6sqm, and as a standard solution for internal walls exposed to low traffic. It is fire-resistant and deemed to be non-combustible.
Can Hardiflex reduce heat?
Hardieflex Eaves have been designed to withstand torrential typhoons and strong wind loads, and it can also help to naturally cool the house by reducing heat load during hot season.
Is Hardiflex fire resistance?
Each Hardieflex®board is durable3 enough to withstand varying weather conditions giving you peace of mind all year-round. Fire isn't the only thing it performs well against; it is also resistant moisture damageand even resistant to damage from termites.
How much does Hardiflex cost?
HARDIFLEX PRICE LISTITEM NO.DESCRIPTIONPRICE1HARDFLEX4552HARDFLEX5333HARDFLEX7544HARDFLEX1,1311 more row•May 17, 2020
What is the color of asbestos sheeting?
Asbestos cement sheeting is white to grey in colour. It is usually flat and smooth and may be painted or have dimples like a golf ball on one side. The Tilux product may have silver screws holding it in place, or nail heads sitting on top of the sheet.
What is the difference between asbestos and cement?
Cement sheeting and asbestos. Asbestos cement sheeting can feel hard and brittle. Asbestos cement sheeting is white to grey in colour. It is usually flat and smooth, and may be painted or have dimples like a golf ball on one side.
What is cement sheeting made of?
Cement sheeting was made of asbestos fibres and cement mix. The cement mix locked in the asbestos fibres. Flat sheet fibro was the most common asbestos cement sheeting. It was nailed to a wooden frame for quick and cheap construction and may have been painted over.
What is Tilux sheeting?
Tilux - coloured, patterned and waterproof, this sheeting was used in wet areas like kitchens, bathrooms and laundries. Versilux - fibro sheeting often used to line internal walls and ceilings in laundries, kitchens and high-traffic areas. Often used by builders in residential and commercial buildings.
What is hardiplank in a house?
Hardiplank – looks like weatherboard and common in single and medium-density homes for alterations and additions.
Can asbestos be moved in cement?
Asbestos fibres in cement sheeting don’t tend to move if the sheeting is in a complete piece and is not cut or drilled.
Is asbestos brittle?
Asbestos cement sheeting can feel hard and brittle. Non-Friable cement sheeting can also become friable if it’s disturbed or damaged by machining or tools.
What is asbestos made of?
Asbestos is the term given to a group of naturally occurring fibrous minerals. The most common types of asbestos are chrysotile (white), followed by amosite (brown) and crocidolite (blue) asbestos.
What is the asbestos task force?
The ACT Asbestos Task Force (2005) guide “Asbestos Management in the ACT”, provides a list of typical asbestos uses in the home. The list is also largely applicable to Western Australia, although with the inclusion of ACM fencing which is very common in this State. The list and associated house location guide is reproduced in Appendix A.
What is the Quick Identification Guideabove?
The Quick Identification Guideabove provid es a simple aid to ACM identification. More detail about the process is included in this section and in sections six and eight.
Which country has the highest asbestos levels?
As a result of its extensive use, Australia has some of the highest asbestos-related disease (mesothelioma) rates in the world.
Is asbestos in walls?
In Western Australia many older residential and commercial buildings built pre1990 (possibly - up to 75per cent ), may contain asbestos, mainly as cement sheeting in walls, ceilings, eaves, fences and roofs. Occasionally it may occur in other forms in limited amounts such as the backing for sheet linoleum, within vinyl floor tiles, some fibre boards and as nonbonded - (friable) material for insulation purposes.
Can asbestos be ACM?
However, often even asbestos professionals cannot be certain. Therefore, suspected ACM should be assumed to be ACM.
