How to use Henry’s feather finish?
Instead of using the Ardex brand feather finish which had to be ordered, I used the Henry’s brand feather finish found at our local hardware store. It mixes the same, with the ratio of 1:2 (water to powder.) At first I thought using a mudding pan would work for mixing, but I quickly switched to the temporary buckets.
What is Ardex feather finish XF?
Like classic ARDEX FEATHER FINISH, ARDEX FEATHER FINISH XF is a self-drying, finishing underlayment, designed to provide a smooth surface prior to the installation of floor covering over a variety of substrates. It installs from a true feather-edge, up to unlimited depth in defined areas and can receive floor coverings in as little as 15 minutes.
What kind of feather finish for concrete overlay?
There are 2 types of feather finish I’ve seen DIY’ers use online, and that is Ardex feather finish, or the Home Depot, Henry brand. We decided to use the Home Depot brand as it was cheaper and local. This type of concrete overlay gives a dark gray color, and I really wanted a light gray.
Is all feather finish the way to go?
Perhaps all feather finish is the way to go, but again, I’d love to know if others are having this problem with the brands and mixtures they are using. The light gray color was my dream, which is why we did the half and half mixture.
Is Henry and ardex the same?
HENRY is one of four strong brands that make up ARDEX Americas, designed to meet the needs of our customers, every time. Read more about the other three brands that comprise ARDEX Americas below. ARDEX is a worldwide industry leader in innovation and technology for the most complex installation challenges.
What color is Henry feather finish?
GrayTechnical DetailsManufacturerArdexSize7 lbColorGrayMaterialWoodPower SourceAir Powered9 more rows
What is ARDEX FEATHER FINISH used for?
ARDEX FEATHER FINISH is an ultra rapid drying patching and smoothing compound, which provides a high bond strength to concrete, plywood, sand/cement screeds, existing smoothing compounds and ceramic tiles, without the need to prime.
Can you sand Henry feather finish?
We applied two coats of the Feather Finish with ample drying time in between. After it's completely dry and set (follow package directions), you'll want to sand out any lines made with your knife. My husband held a Shop Vac in one hand and his palm sander in the other in order to minimize the dust.
How long does Henry feather finish take to dry?
Easy to use (mix small batches so it doesn't harden up on you to quick), very affordable and the end product is exactly what we had hoped for. A couple of important tips: 1) It only takes about 10 to 15 minutes to harden, so mix don't mix a large amount.
Can you epoxy over ardex feather finish?
OTHER NON-POROUS SUBSTRATES: ARDEX FEATHER FINISH also can be applied over other clean, sound and solidly bonded non-porous substrates, including terrazzo, burnished concrete, epoxy coating systems, and ceramic and quarry tile.
How do you seal ardex feather finish?
2:3110:47DIY Ardex Feather Finish Concrete Countertops! - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe feather finish that's what you want the feather finish. Basically. Inside it's just a reallyMoreThe feather finish that's what you want the feather finish. Basically. Inside it's just a really fine concrete powder that you mix with water to like a thick sludge. That you then put on with a tray.
Can I use ardex feather finish on walls?
ARDEX PANDOMO® W1 is a self-drying, trowel applied finishing compound for walls and ceilings. ARDEX PANDOMO W1 has excellent adhesion over a wide variety of porous surfaces, including concrete, gypsum plaster, drywall and all types of masonry surfaces.
How do you do ardex feather finish?
0:111:16ARDEX FEATHER FINISH® Self-Drying, Cement ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSince its introduction in 1993 ardex feather finish mixes with water only to an ultra smoothMoreSince its introduction in 1993 ardex feather finish mixes with water only to an ultra smooth consistency. No additives are required.
Can ardex be painted over?
All oil, grease, wax, dirt, chemicals, asphalt, latex and gypsum compounds, dust, paint, or any contaminant which might act as a bond breaker must be completely removed before installing an ARDEX underlayment or topping.
How do I get a smooth finish on concrete countertops?
If you want to achieve an ultra-smooth, seamless surface, then polishing or sanding the concrete after it's cast is the best approach. Polishing can also be used to expose decorative aggregate, glass, or stone within the concrete, resulting in terrazzo-like finishes.
How durable are concrete overlay countertops?
Concrete Overlay for countertops is an ultra-strong, easy-to-apply concrete layer used to “lay over” existing laminate, formica, wood, or tile countertops. Overlay ensures a durable concrete look and feel at a fraction of the cost required for freshly poured concrete slabs.
Can you use feather finish on floors?
ARDEX FEATHER FINISH® is an underlayment formulated from a blend of Portland cement and other hydraulic cements that provides a smooth, permanent finish for a variety of substrates prior to the installation of today's demanding floor coverings, including sheet vinyl and VCT (vinyl composition tile).
What does feathering a floor mean?
English translation: applying material to concrete floor to even it before putting in other flooring.
Can you use ardex on wood?
ARDEX Liquid BackerBoard is also suitable for the installation of engineered wood plank and laminate floor coverings and for encapsulating in-floor electrical heating systems.
Can ardex be painted over?
All oil, grease, wax, dirt, chemicals, asphalt, latex and gypsum compounds, dust, paint, or any contaminant which might act as a bond breaker must be completely removed before installing an ARDEX underlayment or topping.